dji MAVIC PRO User manual

V1.0
2016.10
User Manual
MAVIC PRO

2
©2016 DJI All Rights Reserved.
Using this manual
Legends
Warning Important Hints and Tips Reference
Read Before the First Flight
Read the following documents before using the MAVICTM Pro:
1. In the Box
2. Mavic Pro User Manual
3. Mavic Pro Quick Start Guide
4. Mavic Pro Disclaimer and Safety Guidelines
5. Mavic Pro Intelligent Flight Battery Safety Guidelines
We recommend that you watch all tutorial videos on the ofcial DJITM website and read the Disclaimer
before you y. Prepare for your rst ight by reviewing the Mavic Pro Quick Start Guide and refer to the
User Manual for more details.
Video Tutorials
Please watch the tutorial videos at the link below, which demonstrates how to use Mavic Pro safely:
http://www.dji.com/mavic
Download the DJI GO App
Download and install the DJI GOTM app before using the aircraft. Scan the QR code to
the right to download the latest version.
The Android version of the DJI GO app is compatible with Android 4.1.2 or later.
The iOS version of the DJI GO app is compatible with iOS 8.0 or later.
Download the DJI Assistant 2
Download the DJI Assistant 2 at http://www.dji.com/mavic/download
Searching for Keywords
Search for keywords such as “battery” and “install” to nd a topic. If you are using Adobe Acrobat
Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic
View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document
This document supports high resolution printing.

©2016 DJI All Rights Reserved.
3
Contents
Using this manual 2
Legends 2
Read Before the First Flight 2
Video Tutorials 2
Download the DJI GO App 2
Download the DJI Assistant 2 2
Product Prole 6
Introduction 6
Features Highlights 6
Preparing the Mavic Pro 6
Aircraft Diagram 8
Remote Controller Diagram 8
Aircraft 11
Aircraft Prole 11
Flight Mode 11
Flight Status Indicator 12
Return-to-Home (RTH) 13
TapFly 17
ActiveTrack 19
Gesture Mode 21
Tripod Mode 22
Forward and Downward Vision System 22
Flight Recorder 25
Attaching and Detaching the Propellers 25
Intelligent Flight Battery 26
Remote Controller 31
Remote Controller Prole 31
Using the Remote Controller 31
Linking the Remote Controller 36
Camera and Gimbal 38
Camera Prole 38
Gimbal 39

4
©2016 DJI All Rights Reserved.
DJI GO App 41
Equipment 41
Editor 46
SkyPixel 46
Me 46
Flight 48
Flight Environment Requirements 48
Flight Limits and No-Fly Zones 48
Preight Checklist 49
Calibrating the Compass 50
Auto Takeoff and Auto Landing 51
Starting/Stopping the Motors 52
Flight Test 52
Appendix 55
Specications 55
Firmware Updates 56
Intelligent Flight Mode 57
Remote Controller LCD Screen Menu Information 58
After-Sales Information 59
Compliance Information 59

©2016 DJI All Rights Reserved.
5
Product Prole
This section introduces the Mavic Pro
and lists the components of the aircraft
and remote controller.

Product Profile
6
©2016 DJI All Rights Reserved.
Product Prole
Introduction
The DJI Mavic Pro is DJI’s smallest ying camera, featuring a fully stabilized camera, Intelligent
Flight Modes and Obstacle Avoidance inside a revolutionary folding design. It captures 4K videos
and 12 megapixel photos, and is capable of both ActiveTrackTM and TapFlyTM making complex
shots effortless.
Mavic Pro boasts a maximum ight speed of 40 mph (65 kph) and a maximum ight time of 27
minutes*.
* Maximum ight time was tested in 0 wind at a consistent 15.5 mph (25 kph). This value should be taken
for reference only.
Features Highlights
The Mavic Pro is an ultra-portable aircraft thanks to its revolutionary folding design.
Camera and Gimbal: With the Mavic Pro, you are shooting 4K video at up to 30 frames per second and
capturing 12 megapixel photos that look crisper and cleaner than ever, all stabilized by the compact on-
board gimbal.
Flight Controller: The next-generation ight controller has been updated to provide a safer, more reliable
ight experience. The aircraft is able to automatically return to its home point when transmission signal is
lost or battery level is low. Apart from being able to hover in door at low altitudes, the aircraft is also able
to sense and avoid obstacles on its route, enhancing safety.
HD Video Downlink: Built into the Remote Controller is DJI’s latest long-range transmission technology
OCUSYNCTM , offering a maximum transmission range of 4.3 mi (7 km) and making it possible to control
your aircraft up and stream video to your mobile device at 1080p.
Preparing the Mavic Pro
All arms of the aircraft are folded on delivery. Follow the instructions below to unfold all the arms.
Preparing Aircraft
Remove the gimbal cover and gimbal clamp from
the camera.
Attaching the Propellers
Attach the white ringed propellers to the mounting base with white marks. Press the propeller down onto
the mounting plate and rotate in the lock direction until it is secured. Attach the other propellers to the
mounting base without marks.
The gimbal cover is used to protect the gimbal. Remove it when necessary.
Use the Gimbal Clamp and Gimbal Cover to protect the gimbal when the Mavic Pro is not in use.

Product Profile
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
7
Preparing the Remote Controller
1. Unfold the mobile device clamps and the antennas.
2. Choose an appropriate RC cable based on the type of mobile device used. An RC cable with a
Lightning Connector has been connected and the Standard Micro USB connector cable and the USB
Type-C connector cable are included. An optional Reverse Micro USB connector cable is available.
Insert the mobile device and secure it.
Unfold the front arms and the propellers before the rear ones. All arms and propellers must be
unfolded before takeoff.
Ensure the Control Mode Switch is toggled to "RC" when using the Remote Controller to control
the aircraft.
To connect your mobile device to the remote controller using a USB cable, plug one end of the cable
into your mobile device and the other end into the USB port on the bottom of the remote controller.
Marked Unmarked
Unfold the Arms
1. Unfold the front arms, followed by the rear arms of the aircraft as shown.
2. Unfold all propeller blades.
2
3
1
Refer to the gure below for how to replace the RC cable.
The RC cable slider must be replaced if
using a USB Type-C RC cable.
Micro USB Connector
Reverse Micro USB
Connector
Lightning Connector
USB Type-C Connector

Product Profile
Mavic Pro User Manual
8
©2016 DJI All Rights Reserved.
Aircraft Diagram
Remote Controller Diagram
1.Propeller
2.Motor
3.Front LED Indicator
4.Forward Vision System
5.Landing Gear
(with built-in antennas)
6.Gimbal and Camera
7.Intelligent Flight Battery
8.Link Button
9.Linking Status Indicator
10.Camera Micro SD Card Slot
11.Control Mode Switch
12.Micro USB Port
13.Aircraft Status Indicator
14.Downward Vision System
1
3
5
4
2
8
9
67
1. Antennas
Relays aircraft control and video
signal.
2. Return to Home (RTH) Button
Press and hold the button to initiate
Return to Home (RTH). Press again to
cancel RTH.
3. Power Button
Used to turn the remote controller on
and off.
4. Control Stick
Controls the orientation and
movement of the aircraft.
1
2
3
4
5
6
7
11
10
12
1413
9
8

Product Profile
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
9
11
13
15
14
10
12
1716
10. C1 Button
The default conguration is listed below.
Set these values based on your preference
in the DJI GO app.
Press once to focus on the center or add a
waypoint when using Waypoints.
11. C2 Button
The default conguration is listed below.
Set these values based on your preference
in the DJI GO app.
Press once to playback or delete a
waypoint when using Waypoints.
12. Gimbal Dial
Control the camera's tilt.
13. Camera Settings Dial
Turn the dial to adjust camera settings.
(Only functions when the remote controller
is connected to a mobile device running
the DJI GO app)
14. Record Button
Press to start recording video. Press again
to stop recording.
5. LCD Screen
Displays the aircraft and Remote Controller's
system status.
6. Flight Pause Button
Press once for emergency braking.
7. 5D Button
The default conguration is listed below. Set
these values based on your preference in
the DJI GO app.
Left: Zoom In
Right: Zoom Out
Up: Camera Forward
Down: Gimbal Downward
Press down: Bring up DJI GO Intelligent
Flight menu.
8. Mobile Device Clamp
Securely mounts your mobile device onto
the remote controller.
9. USB Port
Connection to mobile device for DJI GO
app.
15. Shutter Button
Press to take a photo. If burst mode is
selected, a pre-set number of photos will be
taken.
16. Power Port
Connect to the Charger to charge the
remote controller battery. Connect this port
to your mobile device using the RC cable.
17. Flight Mode Switch
Switch between P-mode and S-mode.

10
©2016 DJI All Rights Reserved.
Aircraft
This section introduces the Flight
Controller, Forward and Downward
Vision System, and the Intelligent Flight
Battery.

Aircraft
©2016 DJI All Rights Reserved.
11
Aircraft
Aircraft Prole
The Mavic Pro aircraft comprises of a flight controller, video downlink, propulsion system and an
Intelligent Flight Battery. This section introduces the features of the ight controller, video downlink and
other aircraft components.
Flight Mode
The following ight modes are available for Mavic Pro:
P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS and
Forward and Downward Vision Systems to locate itself, automatically stabilize, and
navigate between obstacles. Advanced features such as TapFly and ActiveTrack
are enabled in this mode.
Note: P-mode requires larger stick movements to achieve high speeds.
S-mode (Sport): The aircraft is using GPS for positioning. As Forward and Downward Vision
Systems are disabled, the aircraft will not be able to sense and avoid obstacles
when in Sport Mode. Ground Station and the Intelligent Flight functions are also not
available in Sport Mode.
Note: Aircraft responses are optimized for agility and speed making it more
responsive to stick movements.
The aircraft will switch to P-GPS when it is using both GPS and Vision System for stabilization. When the
Forward Vision System is enabled and lighting conditions are sufcient, the maximum ight attitude angle
is 16° with a maximum ight speed of 22 mph (36 kph). When forward obstacle sensing are disabled, the
maximum ight attitude angle is 25° and the maximum ight speed is 36 mph (58 kph).
The aircraft will switch to P-OPTI when it is only using Vision System for stabilization.
The aircraft will automatically switch to P-ATTI when the GPS signal is weak and lighting conditions are too
dark for the Forward and Downward Vision Systems. The aircraft will only use its barometer for positioning
to control altitude.
The Forward Vision System is disabled in S-mode (Sport), which means the aircraft will not
be able to automatically avoid obstacles on its route.
The aircraft’s maximum speed and braking distance are signicantly increased in S-mode
(Sport). A minimum braking distance of 30 meters is required in windless conditions.
Descending speed is signicantly increased in S-mode (Sport).
The aircraft’s responsiveness is signicantly increased in S-mode (Sport), which means a small
stick movement on the remote controller will translate into a large travel distance of the aircraft.
Be vigilant and maintain adequate maneuvering space during ight.
Use the Flight Mode switch to change the ight mode of the aircraft.

Aircraft
Mavic Pro User Manual
12
©2016 DJI All Rights Reserved.
Flight Status Indicator
The Mavic Pro has Front LEDs and Aircraft Status Indicator. The positions of these LEDs are shown in the
gure below:
The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft is
turned on to indicate the front (or nose) of the aircraft (the Front LED can be turned off in the DJI GO app).
The Aircraft Status Indicator communicates the system status of the ight controller. Refer to the table be-
low for more information about the Aircraft Status Indicator.
Aircraft Status Indicator Description
Normal
Alternating red, green and yellow
ashes Turning On and Self Diagnostic Testing
Alternate yellow and green ashing Warming Up
Slow green ashing P-mode or S-mode with GPS
×2 Two green ashes P-mode with Forward and Downward Vision
Systems
Slow yellow ashing No GPS and Forward and Downward Vision
Systems
Fast green ashing Braking
Warning
Fast yellow ashing Remote Controller Signal Lost
Slow red ashing Low Battery Warning
Fast red ashing Critical Low Battery Warning
Red ashing IMU Error
— Solid Red Critical Error
Fast alternating red and yellow ashing Compass Calibration Required
Front LED
Front LED
Aircraft Status Indicator

Aircraft
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
13
Return-to-Home (RTH)
Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are three
types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these three scenar-
ios in detail.
GPS Description
Home Point
If a strong GPS signal was acquired before takeoff, the Home Point is
the location from which the aircraft launched. The GPS signal strength
is indicated by the GPS icon ( ). The aircraft status indicator will
blink rapidly when the home point is recorded.
Failsafe RTH
If the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH
will be automatically activated if the remote controller signal is lost for a specified amount of time (3
seconds when using the remote controller and 20 seconds when using Wi-Fi). Return-to-Home can be
cancelled by the pilot, allowing them to regain control when the remote controller signal connection is re-
established.
1 Record Home Point 3 Remote Controller Signal Lost 2 Conrming Home Point
6 Landing (after user conrmed landing) 4 Signal Lost for Extended Time
×
×
5
RTH (adjustable altitude)
Height over HP<=Failsafe Altitude
Height over HP>Failsafe Altitude
Elevate to Failsafe Altitude
Failsafe Altitude
××
Aircraft cannot return to the Home Point when the GPS signal is weak ( [ ] displays grey) or
unavailable.
The aircraft cannot avoid obstruction during Failsafe RTH if Forward Vision System is disabled.
It is important to set a suitable Failsafe altitude before each ight. Launch the DJI GO app, enter
“Camera” and tap to set the Failsafe Altitude.
User cannot control the aircraft while it is ascending to its failsafe altitude. However, user can
press RTH button to exit the ascent and regain control.
Aircraft can sense and avoid obstacles when Forward Vision System is enabled and the lighting
conditions are sufcient. The aircraft will automatically climb to avoid an obstacle and y to the
Home Point at the new altitude.
Forward Vision System can be enabled during ight or RTH only.
Hovering at 2 meters above
the Home Point

Aircraft
Mavic Pro User Manual
14
©2016 DJI All Rights Reserved.
Low Battery RTH
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that
may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately
when prompted. The DJI GO app will display a notice when a low battery warning is triggered. The
aircraft will automatically return to the Home Point if no action is taken after a ten-second countdown. The
user can cancel the RTH procedure by pressing the RTH button on the remote controller. The thresholds
for these warnings are automatically determined based on the aircraft’s current altitude and distance from
the Home Point.
The aircraft will land automatically if the current battery level can only support the aircraft long enough
to descend from its current altitude. The user can still use the remote controller to alter the aircraft’s
orientation during the landing process.
The Battery Level Indicator is displayed in the DJI GO app, and is described below:
Battery level Indicator
Critical Low battery level warning
(Red)
Low battery level
warning (Yellow)
Sufcient battery level
(Green)
Remaining ight time
Power requires
to return home
12:29
Smart RTH
Use the RTH button on the remote controller or tap the RTH button in the DJI GO app and follow the on-
screen instructions when GPS is available to initiate Smart RTH. The aircraft status indicator will blink to
display the current status. The aircraft will sense and avoid obstacles on its ight path during Smart RTH.
The aircraft may choose to navigate or hover in place to avoid collision. User can manually navigate the
aircraft to avoid obstacles if the Forward Vision System is disabled or if light levels are low. The pilot can
also immediately exit Smart RTH using the Flight Pause Button on the remote controller or by pressing the
Stop icon in the DJI GO app.
Landing Protection will activate during Smart RTH, Precision Landing and when using Auto Landing in the
DJI GO app:
1. When Landing Protection determines that the ground is suitable for landing, the Mavic Pro will land
gently.
2. If Landing Protection determines that the ground is not suitable for landing, the Mavic Pro will hover and
wait for pilot conrmation.
3. If Landing Protection is not operational, the DJI GO app will display a landing prompt when the Mavic
Pro descends below 0.5 meters. Pull down on the throttle or use the auto landing slider to land.

Aircraft
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
15
Battery Level
Warning Remark Aircraft Status Indicator DJI GO App Flight Instructions
Low battery
level warning
Battery power
is low. Land the
aircraft.
Aircraft status
indicator blinks
RED slowly.
Tap “Go-home” to have the
aircraft return to the Home
point automatically, or
“Cancel” to resume normal
ight. If no action is taken,
the aircraft will automatically
go home after 10 seconds.
Remote controller will sound
an alarm.
Fly the aircraft
back and land
it as soon as
possible, then
stop the motors
and replace the
battery.
Critical Low
battery level
warning
The aircraft
must land
immediately.
Aircraft status
indicator blinks
RED quickly.
The DJI GO app display will
ash red and the aircraft will
start to descend. The remote
controller will sound an alarm.
Allow the aircraft to
descend and land
automatically.
Estimated
remaining
ight time
Estimated
remaining ight
based on current
battery level.
N/A N/A N/A
When the Critical low battery level warning is triggered and the aircraft begins to land
automatically, push the left stick upward to make the aircraft hover at its current altitude, giving
you an opportunity to navigate to a more appropriate landing location.
The colored zones and markers on the battery level indicator bar reect the estimated
remaining ight time. They are automatically adjusted according to the aircraft’s current
location and status.
Precision Landing
The Mavic Pro automatically scans and attempts to match the terrain features underneath during Return
to Home. When current terrain matches home point terrain, the Mavic will start landing immediately to
achieve precision landing. The DJI GO app will show a terrain feature mismatch prompt if matching fails.
Precision Landing performance is subject to the following conditions:
a. Home point is recorded upon take off, and cannot not be refreshed during ight.
b. Aircraft must take off vertically. Take off altitude must be greater than 10 meters.
c. Home point terrain features remain largely unchanged.
d. Home point terrain with no distinctive features will affect the performance.
e. Lighting conditions cannot be too light nor too dark.
The following actions are available during landing:
a. Pull throttle down to accelerate landing.
b. Moving the control sticks in any other direction will stop Precision Landing. The Mavic Pro
will descend vertically and Landing Protection will remain active.

Aircraft
Mavic Pro User Manual
16
©2016 DJI All Rights Reserved.
Obstacle Avoidance During RTH
Aircraft can now sense and actively attempt to avoid obstacles during RTH, provided that the lighting
conditions are adequate for the Forward Vision System. Upon detecting an obstacle, the aircraft will act
as follows:
1. Aircraft decelerates when an obstacle is sensed at 49 ft (15 m) ahead.
2. Aircraft stops and hovers then starts ascending vertically to avoid the obstacle. The aircraft will
stop climbing when it is at least 16 ft (5 m) above the detected obstacle.
3. RTH procedures resume. The aircraft will continue ying to the Home Point at the current altitude.
10 m 5 m
H
RTH Altitude
The aircraft cannot avoid obstructions during RTH when the Forward Vision
System is disabled. Therefore, it is important to set a suitable Failsafe altitude
before each ight. Launch the DJI GO app and enter “Camera” and tap to
set the Failsafe altitude.
10 m 5 m
H
RTH Altitude
If Return to Home (RTH), including Smart RTH and Low Battery RTH, is
triggered and the aircraft is further than 20 m from the home point:
1. It will return to home at the current altitude if flying at or above the RTH
altitude.
2. It will ascend to the RTH altitude if ying below it.
10 m
5 m
H
RTH Altitude
If RTH, including Smart RTH and Low Battery RTH, is triggered between 16 ft
and 66 ft (5 m and 20 m) from the home point, and Forward Vision System is
activated:
1. If aircraft's current altitude is greater than 32 ft (10 m), the aircraft will return
to the home point at the current altitude.
2. If aircraft's current altitude is lower than 32 ft (10 m), the aircraft will first
automatically ascend to 32 ft (10 m), from the current altitude.
The ight speed will be adjusted to 9 mph (14 kph). The aircraft will start
landing immediately if the Forward Vision System is deactivated. When entering
Failsafe RTH, the Forward Vision System status is evaluated and RTH will adapt
accordingly.
10 m
5 m
H
RTH Altitude
Aircraft automatically descends and lands if RTH is triggered when the aircraft
is within a 6 ft (5 m) radius of the Home Point.
返航高度 5米
H
10米
Aircraft cannot return to the Home Point when the GPS signal is weak ( [ ]
displays grey) or is unavailable.
20米 20米
H
Press the Flight Pause button to exit from RTH. The aircraft will stop
ascending and hover.
RTH Safety Notices

Aircraft
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
17
15 meters
5 meters
TapFly
Introduction
With the TapFly feature, users can now tap on the mobile device screen to y in the designated direction
without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and
hover provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).
To ensure the aircraft returns home forwards, it cannot rotate during RTH while the
Forward Vision System is enabled.
The aircraft cannot avoid obstacles above, beside, or behind the aircraft.
3 meters
SPORT
Using TapFly
Ensure the battery level is more than 50% for the Intelligent Flight Battery, and the aircraft is in P-mode.
Then follow the steps below to use TapFly:
1. Take off and ensure the aircraft is ying at least 9ft (3m) above the ground.
2. Launch the DJI GO app and tap , then tap , read and understand the prompts.
AE
09:29
61%
P-GPS 12
TapFly
ActiveTrack
Gesture
Joystick
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
READY TO GO (GPS)

Aircraft
Mavic Pro User Manual
18
©2016 DJI All Rights Reserved.
3. Tap once on the target direction and wait for the icon to appear. Tap again to conrm the selection
and the aircraft will y in that direction.
DO NOT guide the aircraft to fly towards people, animals, small and fine objects (e.g. tree
branches and power lines) or transparent objects (e.g. glass or water).
Watch for the obstacles in the ight path and stay clear of them.
There may be deviations between the expected and the actual ight path of TapFly selection.
The selectable range for the target direction is limited. You cannot make a TapFly selection close to
the upper or lower edge of the screen.
TapFly Mode may not work properly when the aircraft is ying over water or snow covered
areas.
Be extra cautions when ying in dark (< 300 lux ) or bright (>10,000 lux) environments.
AE
09:29
61%
P-GPS 12
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
READY TO GO (GPS)
After conrming the TapFly selection, the aircraft will y in the direction marked by the icon . Note: You
can still use the control stick to control the movement of the aircraft during the ight.
AE
09:29
61%
P-GPS 12
STOP
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
READY TO GO (GPS)
The aircraft will automatically adjust its speed when it senses an obstacle in front or if it is ying too close
to the ground. However, this feature should not be relied upon for navigation between obstacles.
Failsafe procedures will override TapFly. If the GPS signal weakens, the aircraft will exit autonomous ight
and return to home.

Aircraft
Mavic Pro User Manual
©2016 DJI All Rights Reserved.
19
Exit TapFly
Use the following methods to exit TapFly:
1. Press the Flight Pause button on the remote controller.
2. Pull back the pitch stick on the remote controller.
3. Tap “STOP” button on the screen.
STOP
Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue ying or begin
manual ight.
ActiveTrack
ActiveTrack allows you to mark and track a moving object on your mobile device screen. The aircraft will
automatically avoid obstacles in its ight path. No external tracking device is required.
The Mavic Pro can automatically identify and trace bikes and other vehicles, people and animals, and
use different tracking strategies for each.
Using ActiveTrack
Ensure the Intelligent Flight Battery has more than 50% power and the aircraft is in P-mode. Then follow
the steps below to use ActiveTrack:
1. Take off and hover at least 9ft (3m) above the ground.
OR OR
Flight Pause button
3 meters
SPORT
2. In the DJI GO app, tap and tap to bring up the ight modes and then select ActiveTrack.
AE
09:29
61%
P-GPS 12
TapFly
ActiveTrack
Gesture
Joystick
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
READY TO GO (GPS)

Aircraft
Mavic Pro User Manual
20
©2016 DJI All Rights Reserved.
3. Tap on the subject you want to track then tap to conrm selection. If the subject is not automatically
recognized, drag a box around it. The box will turn green when tracking is in progress. If the box
turns red, the object could not be identied and you should try again.
AE
09:29
61%
P-GPS 12
ActiveTrack
H 10.0MD 30M
VS 2.0M/S VPS 2.0MH.S 10.0 M/S
READY TO GO (GPS)
ActiveTrack includes following functions:
Trace Spotlight Prole
The aircraft tracks the
subject at a constant
distance. Use the roll stick
on the remote controller or
the slider in DJI GO to circle
the subject.
Aircraft will not trace a subject
automatically, but it keeps the
camera pointing at the subject
during ight. The remote controller
can be used to maneuver the
aircraft, but yaw is disabled. Using
the left stick and gimbal dial will
adjust subject framing.
The aircraft tracks the subject
at constant angle and distance
from the side. Use the roll stick
on the remote control to circle
the subject.
DO NOT select an area containing people, animals, small, ne objects (e.g. tree branches
and power lines) or transparent objects (e.g. glass or water).
Stay clear of obstacles near the ight path, particularly when the aircraft is ying backward.
Be extra vigilant when using ActiveTrack in any of the following situations:
a) The tracked subject is not moving on a level plane.
b) The tracked subject changes shape drastically while moving.
c) The tracked subject could be blocked or out of sight for a long time.
d) The tracked subject is moving on a snowy surface.
e) Available light is low (< 300 lux) or high (> 10,000 lux).
f) The tracked subject has a similar color or pattern as its surrounding environment.