Dometic FreshWell 2000 User manual

Under-bench air conditioner
Operating manual . . . . . . . . . . . . . . . 7
Staukastenklimaanlage
Bedienungsanleitung . . . . . . . . . . . . 31
Climatiseur de coffre
Notice d’utilisation . . . . . . . . . . . . . . 56
Equipo de aire acondicionado
de cajón
Instrucciones de uso . . . . . . . . . . . . 81
Climatizzatore per vano di
carico
Istruzioni per l’uso . . . . . . . . . . . . . 108
Airco onder de bank
Gebruiksaanwijzing . . . . . . . . . . . . 135
Klimaanlæg til montering i et
magasin
Betjeningsvejledning . . . . . . . . . . . 161
Klimatanläggning för
förvaringsutrymmen
Bruksanvisning . . . . . . . . . . . . . . . 186
Takboksklimaanlegg
Bruksanvisning . . . . . . . . . . . . . . . 208
Kaappi-ilmastointilaite
Käyttöohje . . . . . . . . . . . . . . . . . . . 230
Sistema de climatização para
caixa de arrumação
Manual de instruções. . . . . . . . . . . 254
  
 
  . . . . 281
EN
DE
FR
ES
IT
NL
DA
SV
NO
FI
PT
RU
Klimatyzator umieszczany
w schowku
Instrukcja obsugi . . . . . . . . . . . . . 308
Klimatizace do zavazadlového
prostoru
Bruksanvisning . . . . . . . . . . . . . . . 335
Klimatizané zariadenie do
úložného priestoru
Käyttöohje. . . . . . . . . . . . . . . . . . . 358
Tárolóládás klímaberendezés
Használati utasítás . . . . . . . . . . . . 383
PL
CS
SK
HU
Dometic
FreshWell2000

FreshWell2000
3
1
2
3
4
1
5
1
2
3
4
2

FreshWell2000
4
ON/OFF
MODE
TIMER
SLEEP
FAN SPEED
CLOCK
STRONGEST
INDOOR
RESEND
°F/°C
9
10
1
2
3
5
7
4
6
11
12
13
8
3
4

FreshWell2000
5
1
2
5
1
6

FreshWell2000
6
560 400
59 33
286
93,5
7

EN
FreshWell2000
7
Please read this instruction manual carefully before first use, and store
it in a safe place. If you pass on the product to another person, hand
over this instruction manual along with it.
Table of contents
1 Explanation of symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2 Safety instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.1 General safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Operating the device safely . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 Target group for this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Intended use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 Technical description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6.1 Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.2 Receiver. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
6.3 Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6.4 Air conditioning modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
6.5 Additional functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
7 Before initial use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8 Operating the under-bench air conditioner. . . . . . . . . . . . . . . . . 17
8.1 Basic notes on operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.2 Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
8.3 Hint for improved use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
8.4 Switching the under-bench air conditioner on and off . . . . . . 18
8.5 Selecting the air conditioning mode. . . . . . . . . . . . . . . . . . . . 19
8.6 Selecting the blower setting manually . . . . . . . . . . . . . . . . . . 19
8.7 Setting the temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.8 Setting the timer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
8.9 Activating the Sleep function . . . . . . . . . . . . . . . . . . . . . . . . . 22
8.10 Activating the “Strongest” function. . . . . . . . . . . . . . . . . . . . . 22
8.11 Replacing the remote control batteries . . . . . . . . . . . . . . . . . 23
8.12 Setting the time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9 Cleaning the under-bench air conditioner. . . . . . . . . . . . . . . . . . 24
10 Maintenance of the under-bench air conditioner . . . . . . . . . . . . 25

EN
Explanation of symbols FreshWell2000
8
11 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
12 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
13 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
14 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
1 Explanation of symbols
!
!
A
I
➤Action: This symbol indicates that action is required on your part. The
required action is described step-by-step.
✓This symbol describes the result of an action.
Fig. 15, page 3: This refers to an element in an illustration. In this case,
item 5 in figure 1 on page 3.
WARNING!
Safety instruction: Failure to observe this instruction can cause
fatal or serious injury.
CAUTION!
Safety instruction: Failure to observe this instruction can lead to
injury.
NOTICE!
Failure to observe this instruction can cause material damage and
impair the function of the product.
NOTE
Supplementary information for operating the product.

EN
FreshWell2000 Safety instructions
9
2 Safety instructions
The manufacturer accepts no liability for damage in the following cases:
zDamage to the product resulting from mechanical influences and excess
voltage
zAlterations to the product without express permission from the manu-
facturer
zUse for purposes other than those described in the operating manual
In particular, the manufacturer will not be liable for any consequential dam-
age, especially consequential damage caused by failure of the under-bench
air conditioner.
Note the following basic safety information when using electrical devices to
protect against:
zElectric shock
zFire hazards
zInjury
2.1 General safety
!WARNING!
zElectrical devices are not toys.
Keep electrical appliances out of reach of children or infirm
persons. Do not let them use the appliances without super-
vision.
zPersons whose physical, sensory or mental capabilities or
whose lack of experience and knowledge prevent them from
using the device safely should not use it without supervision or
instruction by a responsible person.
zOnly use the device as intended.
zDo not make any alterations or conversions to the device.
zInstallation, maintenance and repairs of the under-bench air
conditioner may only be carried out by qualified personnel who
are familiar with the risks involved when handling refrigerant
and air conditioning systems as well as the relevant regulations.
Inadequate repairs may cause serious hazards. For repair
service, please contact the service centre in your country
(addresses on the back page).

EN
Target group for this manual FreshWell2000
10
zDo not use the under-bench air conditioner near flammable
fluids.
zMake sure no combustible objects are stored or installed near
the air outlet. A distance of at least 50 cm must be kept.
zDo not reach into air outlets or insert any foreign objects in the
under-bench air conditioner.
zDo not undo the upper cover of the under-bench air conditioner
in the event of a fire. Use approved extinguishing agents
instead. Do not use water to extinguish fires.
ANOTICE!
zIf faults occur in the under-bench air conditioner's refrigerant
circuit, the under-bench air conditioner must be checked by a
specialist company and properly repaired. The refrigerant must
never be released into the air.
2.2 Operating the device safely
!WARNING!
zAlways disconnect the power supply when working on the
device.
ANOTICE!
zThe under-bench air conditioner is not suitable for use in agri-
cultural or construction vehicles.
zOperate the device only if you are certain that the housing and
the cables are undamaged.
3 Target group for this manual
This operating manual is for the user of the under-bench air conditioner.

EN
FreshWell2000 Scope of delivery
11
4 Scope of delivery
5 Intended use
The Dometic FreshWell 2000 under-bench air conditioner (item no.
9105304499) can condition the interior of campers and caravans with cool
air.
The under-bench air conditioner is not suitable for installation in construction
machines, agricultural machines or similar equipment. It will not work prop-
erly if exposed to strong vibrations.
The operating mode of Freshwell is guaranteed for temperature up to 52 °C.
6 Technical description
The under-bench air conditioner supplies the interior with cool dehumidified
air without dust and dirt.
The under-bench air conditioner is operated with the remote control.
I
Designation Item number
Dometic FreshWell under-bench air conditioner 9105304499
Installation manual
Operating manual
NOTE
The under-bench air conditioner can lower the temperature within
the vehicle to a certain level. The temperature depends on the
type of vehicle, the ambient temperature and the cooling capacity
of your under-bench air conditioner.
Below an outer temperature of 16 °C the under-bench air condi-
tioner doesn’t cool anymore. In this case only use the air condi-
tioning mode “Circulating air” ( ).

EN
Technical description FreshWell2000
12
6.1 Components
The refrigerant circuit of the under-bench air conditioner consists of the fol-
lowing main components (fig. 1, page 3):
zCompressor (1)
The compressor draws in the refrigerant used and compresses it. This
raises the pressure and therefore the temperature of the refrigerant.
zCondenser (2)
The built-in liquefier works like a cooler or heat exchanger. The air flow-
ing past absorbs the heat and the hot refrigerant gas cools down and
becomes liquid.
zEvaporator (3)
The evaporators cool down and dehumidify the air flowing past them.
The refrigerant absorbs the heat and vaporises.
z
Blower (4)
A blower distributes the cooled or heated air within the vehicle through
an air outlet unit.
6.2 Receiver
The receiver (fig. 2, page 3) contains the following control and display
elements:
In case of an alarm the display shows an error code to identify the fault:
No. Explanation
1 Digital display Displays the room temperature.
2 Red LED The under-bench air conditioner is switched on.
3 Blue LED The under-bench air conditioner is in night mode.
4 Green LED The compressor is working.
5 Yellow LED Constantly lit: the timer mode is switched on
Flashing: the ventilation is temporarily suspended
Code Explanation
E1 Air sensor or wire broken
E2 Evaporator tube sensor or wire broken
E7 Communication fault between PCB and PCB Display

EN
FreshWell2000 Technical description
13
6.3 Remote control
All settings of the device (e. g. temperature settings, timer programming) are
transmitted to the under-bench air conditioner by remote control.
The following control and display elements are available on the remote
control (fig. 3, page 4) :
No. Explanation
1Digital display:
displays the following:
–Time
– Selected room temperature (target value) in °C or °F
– Air conditioning mode
– Blower level
– Symbols for active additional functions
– Battery status
2ON/OFF Button:
Switches the under-bench air conditioner and remote control on or to stand-
by mode
3 Button FAN SPEED:
Selects the blower setting
4INDOOR button
Shows the current indoor temperature
5RESEND button:
Shows the latest information again
6°F/°C button:
Transmits current data to the under-bench air conditioner.
Confirms the time setting.
If temperature is displayed: switches between temperature units Celsius
(°C) and Fahrenheit (°F)
7STRONGEST button:
Activates the Strongest function. The Strongest function enables simultane-
ously the dehumidification and circulating air modes.
8SLEEP button:
Activates the Sleep function. The Sleep function automatically reduces the
target value to provide a pleasant sleeping temperature.
9CLOCK button:
Sets the time

EN
Technical description FreshWell2000
14
10 TIMER button:
Sets the timer
11 MODE button:
Selects the air conditioning mode
12 +button:
Increases the value
13 –button:
Reduces the value
No. Explanation

EN
FreshWell2000 Technical description
15
6.4 Air conditioning modes
The under-bench air conditioner has the following air conditioning modes:
Air conditioning
mode
Display
message Explanation
Automatic You specify the blower settings, and the under-
bench air conditioner controls the necessary
operation mode.
The under-bench air conditioner measures the
interior temperature and sets the temperature
as follows:
– interior temperature ≤20 °C: 20 °C
(operation mode: circulating air)
– 20 °C < interior temperature < 25 °C: 22 °C
(operation mode: dehumidification or circu-
lating air)
– interior temperature ≥25 °C: 25 °C
(operation mode: cooling)
The +and –buttons are deactivated in this
mode.
Cooling You specify the temperature and blower set-
tings, and the under-bench air conditioner
cools the interior to this temperature.
Dehumidification You specify the temperature, and the under-
bench air conditioner cools the interior to this
temperature and controls the necessary blower
output and dehumidifies the interior (circulating
air mode).
The FAN SPEED button is deactivated in this
mode.
Circulating air You specify the temperature and the blower
level, and the under-bench air conditioner
blows cold air (cooled circulating air) into the
interior.

EN
Before initial use FreshWell2000
16
6.5 Additional functions
The under-bench air conditioner has the following additional functions:
7 Before initial use
Inspection before starting up
Before you switch on the under-bench air conditioner, observe the following:
➤Check whether the supply voltage and frequency correspond to the val-
ues specified in the technical data, see page 30.
➤Ensure both the air intake opening and the air nozzles are free. All venti-
lation grilles must always be kept free to ensure that the under-bench air
conditioner is able to operate at maximum capacity.
!
Check remote control and insert batteries
➤Insert the provided batteries in the remote control battery compartment,
see chapter “Replacing the remote control batteries” on page 23.
Setting the time
➤Set the current time: see chapter “Setting the time” on page 23.
Additional
function
Display
message Explanation
Timer The under-bench air conditioner is switched on
at the specified time. The display of the remote
control shows “TIMER ON”.
The under-bench air conditioner is switched off
at the specified time. The display of the remote
control shows “TIMER OFF”.
Sleep The set temperature is reduced by 1 °C after
one hour and by 2 °C after two hours to gener-
ate a pleasant temperature for sleeping.
Strongest The Strongest function enables simultaneously
the dehumidification and circulating air modes.
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the
intake grille.

EN
FreshWell2000 Operating the under-bench air conditioner
17
8 Operating the under-bench air
conditioner
8.1 Basic notes on operation
The under-bench air conditioner has three operating modes:
The receiver switches on when it receives pulses from the remote control.
The display shows the temperature setting, after a few seconds the display
switches off.
You can use the remote control to
zswitch the under-bench air conditioner to and from stand-by mode.
zadjust the settings
zselect additional functions
8.2 Using the remote control
The remote control must be pointed at the IR receiver (fig. 24, page 3) on
the receiver during operation.
When a button is pressed, the value is transmitted directly to the under-bench
air conditioner. The under-bench air conditioner confirms the receipt of data
with a high note.
Operating mode Features
Off The under-bench air conditioner is switched off.
The remote control is inactive.
Stand-by The roof air conditioning is ready for operation and can be
switched on with the remote control.
On The under-bench air conditioner is conditioning the air in the
interior.

EN
Operating the under-bench air conditioner FreshWell2000
18
Switching only the remote control to or from stand-by
In stand-by mode, the remote control display shows only the time.
If the remote control is not pointing to the IR receiver (fig. 24, page 3) on
the control panel, you can activate the remote control or switch it to stand-by
independently from the under-bench air conditioner:
➤Press the button.
8.3 Hint for improved use
The following hints will optimise the performance of your under-bench air
conditioner:
zImprove the heat insulation of your vehicle by sealing gaps and hanging
reflective blinds or curtains on your windows.
zIf the vehicle has been subjected to direct sunlight for a long time: Operate
the under-bench air conditioner in the “Circulating air” ( ) mode with the
windows open for a while before switching on the “Cooling” ( ) air con-
ditioning mode.
zAvoid opening doors and windows as far as possible in the “Cooling” ( )
mode.
zSelect an appropriate temperature and blower speed.
zAlign the air nozzles sensibly.
zMake sure the air nozzles and intake grille are not covered by cloths,
paper or other objects.
zClean the air filter periodically.
8.4 Switching the under-bench air conditioner on and
off
I
When you switch on the under-bench air conditioner, the device waits a few
minutes before operating the compressor.
NOTE
zWhen it is switched on, it begins to condition the air to the val-
ues that were set most recently.
zYou can use the remote control to switch the under-bench air
conditioner to and from stand-by mode. Press the button.

EN
FreshWell2000 Operating the under-bench air conditioner
19
8.5 Selecting the air conditioning mode
I
➤Select the air conditioning mode of your choice using the MODE key, see
chapter “Air conditioning modes” on page 15.
✓After two seconds the under-bench air conditioner confirms the receipt of
the values with a high note.
✓The under-bench air conditioner is switched to the selected air condition-
ing mode.
8.6 Selecting the blower setting manually
I
The blower controls the strength of the air supply.
In the “Automatic” ( ), “Cooling” ( ), and “Circulating air”( ) modes, the
blower levels can be selected manually. In the other air conditioning modes,
the under-bench air conditioner controls the blower level automatically.
➤Use the FAN SPEED button to select the desired blower level.
✓The under-bench air conditioner confirms the receipt of the values with a
high note.
✓The new blower level has been set.
NOTE
The under-bench air conditioner must be switched on.
NOTE
The under-bench air conditioner must be switched on.
Display message Explanation
Low blower level
Medium blower level
High blower level
Automatic mode, only available in the “Cooling” ( ) air
conditioning and “Dehumidifying” ( ) modes.
AUTO

EN
Operating the under-bench air conditioner FreshWell2000
20
8.7 Setting the temperature
I
In the “Cooling” ( ), “Dehumidifying” ( ), and “Circulating air”( ) modes,
you can specify a temperature between 18 °C and 30 °C via the remote
control.
➤Use the +or – button to select the desired temperature.
✓The under-bench air conditioner confirms the receipt of the values with a
high note.
✓The temperature is set on the under-bench air conditioner.
8.8 Setting the timer
The timer function allows you to set a specific time period for air conditioning.
You can specify the switch-on time or the switch-off time values.
I
Setting the switch-on time
I
➤Press the TIMER button once.
✓The clock symbol ( ) on the display of the remote control flashes.
➤Use the +or –button to set the time when the under-bench air conditioner
is to switch on.
➤Press the TIMER button to transmit the value to the under-bench air
conditioner.
✓The clock symbol ( ) on the display of the remote control lights
constantly.
✓The yellow LED lights up.
NOTE
The under-bench air conditioner must be switched on.
NOTE
The remote control returns to its initial mode if no button is
pressed on the remote control for 15 seconds while programming
the timer.
NOTE
The under-bench air conditioner must be switched off.