8 ED50/ED100/ED250 11-2022DL4616-004
dormakaba ED50/ED100/ED250 operators – Fine cover
Installation Instructions
Chapter 2
Fig. 2.7.1 Kit, ED Operator Label LE, DK3137-0X0
9Label, Service call
DD3425-010
8Safety Information
label, low energy
DD1269-040
4DD0762-020
Decal, Pull to
Operate
3DD0762-010
Decal, Push to
Operate
2DD0758-010
Decal, Activate
Switch to Operate
1 DD0586-010
Decal, Automatic
Caution Door
Assembly # Item # Quantity
DK-
Single door
low energy
(LE) decal kit
Assembly # Item # Quantity
DK-
Pair door
low energy
(LE) decal kit
SAFETY INFORMATI ON
Low Energy Swinging
Doors
1. Activ ate the do or. Doo r
shouldopen at a slow
smooth pace (4 or more
seconds), and stop without
impact.
2. Door must remainfully open
fora minimum of 5 seconds
before beginning to close.
3. Door shouldclose at a slow,
smooth pace (4 or more
seconds),and stop without
impact.
4. Inspect the oor area. It
should be clean with no
loose parts that might cause
user to trip or fall. Keep
trac path cle ar.
5. Inspect door‘s overall
condition. The appropriate
signageshouldbepresent
and the hardware should
be in good condition.
6. Havedoor inspected by an
AAADM certied inspector
at least annually.
AAADM
American Association of Automatic
DoorManufacturers
ANNUAL COMPLIANCE
INSPECTION
INSPECT FOR AND
COMPLIES WITH ANSI
A156.19 ON:
DATE:______________
by AAADM Certified
Inspector
Number:___________
AAADM-3044
DO NOTUSE DOOR if it fails
any of these safety checks of if
it malfunctions in any way. Call
a qualied automatic door
service company to have door
repaired or serviced.
See Owner’s manual or
instructions for details on
each of these and other
safety items. If you need
a copy of the manual,
contact the manufacturer.
These minimum safety checks,
in addition to those in the
Owner’s Manual, should be
made each day and after any
loss of electrical power .
1
3
4
2
8
DD0758-010
ACTIVATE SWITCH
TO OPERATE
DD0758-010
CAUTION
DOOR
AUTOMATIC
DD0586-010
DD0762-020
PULL
TO OPERATE
DD0762-010
PUSH
TO OPERATE
9
. Kit, ED operator labels
3
2
SAFETY INFORMATI ON
Automatic Swinging Doors
1. Walk toward the door at a
normal pace. The door
shouldopen when you are
about 4 feet from thedo or.
2. Stand motionless on
threshold for at le ast 10
seconds. The door should
not close.
3. Move clear of the area. The
door should remain openfor
at least 1.5seconds an d
should close slowlyand
smoothly.
4. Repeat steps 1 through 3
from other directionif door
is used for two way tra c.
5. Ins pect the oor a rea. It
should be clean withno
loose parts that might cause
user to trip or f all. Keep
trac path cle ar.
6. Inspect door's overall
condition. The appropriate
signage shouldbe present.
7. Havedo or inspectedby an
AAADMcertied inspector
at least annually.
AAADM
American Associatio n of Automatic
DoorManufacturers
ANNUAL COMPLIANCE
INSPECTION
INSPECT FOR AND
COMPLIES WITH ANSI
A156.10 ON:
DATE:______________
by AAADM Certified
Inspector
Number:___________
AAADM-2496
DO NOT USE DOOR if it fails
any of these safety checks of if
it malfunctions in any way. Call
a qualied automatic door
service company to have door
repaired or serviced.
See Owner’s manual or
instructions for details on
each of these and other
safety items. If you need
a copy of the manual,
contact the manufacturer.
These minimum safety checks, in
addition to those in the Owner’s
Manual, should be made each
day and after any loss of
electrical power.
7
DD0739-010
AUTOMATIC
DOOR
DO NOT
ENTER
AUTOMATIC
DOOR
11 CAUTION
DOOR
AUTOMATIC
DD0756-010
orma
a
a
10
AUTOMATIC
DOOR
SAFETY INFORM ATION
Low Energy Swinging
Doors
1. Activ ate the do or. Doo r
shouldopen at a slow
smooth pace (4 or more
seconds), and stop without
impact.
2. Door must remainfully open
fora minimum of 5 seconds
before beginningto close.
3. Door should closeat a slow,
smooth pace (4 or more
seconds),and stop without
impact.
4. Inspect the oor area. It
should be clean with no
loose parts that might cause
user to trip or fall. Keep
trac path clear.
5. Inspect door‘s overall
condition. The appropriate
signage shouldbe p resent
and th e h ard wa re sh ou ld
be in good condition.
6. Have door inspected by an
AAADM certied inspe ctor
at least annually.
AAADM
AmericanAsso ciationof Automatic
DoorManufacturers
ANNUAL COMPLIANCE
INSPECTION
INSPECT FOR AND
COMPLIES WITH ANSI
A156.19 ON:
DATE:______________
by AAADM Certified
Inspector
Number:___________
AAADM-3044
DO NOT USE DOOR if it fails
any of these safety checks of if
it malfunctions in any way. Call
a qualied automatic door
service company to have door
repaired or serviced.
See Owner’s manual or
instructions for details on
each of these and other
safety items. If you need
a copy of the manual,
contact the manufacturer.
These minimum safety checks, in
addition to those in the Owner’s
Manual, should be made each
day and after any loss of
electrical power.
1
5
6
4
8
DD0758-010
ACTIVATE SWITCH
TO OPERATE
DD0758-010
CAUTION
DOOR
AUTOMATIC
DD0586-010
DD0762-020
PULL
TO OPERATE
DD0762-010
PUSH
TO OPERATE
9
11 DD0756-010
Decal, Automatic
Caution Door
10 DD0756-020
Decal, Automatic
Door, Up Arrow
9Decal, Service Call
DD3425-010
8Decal, AAADM
Safety DD1269-020
7Safety Information
label, low energy
DD1269-040
6DD0762-020
Decal, Pull to
Operate
5DD0762-010
Decal, Push to
Operate
4DD0758-010
Decal, Activate
Switch to Operate
3 DD0739-020
Decal, Do Not
Enter
2 DD0739-010
Decal, Do Not
Enter, Up Arrow
1 DD0586-010
Decal, Automatic
Caution Door
Assembly # Item # Quantity
DK-
Pair door full
energy (FE)
decal kit
Fig. 2.7.2 Kit, ED Operator Label FE, DK3137-1X0
Double egress
Assembly # Item # Quantity
DK-
Single door
full energy
(FE) decal
kit
