Dover markem-imaje 9750 User manual

9750
User Manual
EN - 10114031-AA | 4/6/2022
for parts & service call QLC [phone]

for parts & service call QLC [phone]

Summary
User Manual 1
General 7
Description 8
Printer 8
The printing module 12
Head pressurisation kit (optional) 13
Standalone compressor kit (optional) 14
Interface 15
Preview of the main screen 15
Interface usage principles 17
Consult operating information of the interface 20
Viewing a job 21
Use 23
Starting up the printer 23
Shutting down the printer 24
Sending a job for printing 25
Managing consumables 26
Various behaviors of the consumables used 28
Information about the consumables used 29
Replacing a consumable cartridge 30
Editing 34
Usage profiles 34
Activating a profile 35
Printer behaviour at startup 35
Configuring usage profiles 36
Managing passwords 37
Simple modification (Modification in production) 38
Advanced Creation/Modification 39
Cursor mode: move the cursor, add a field and define a style. 40
Modifying a job (Advanced modification) 44
Creating a job 45
Modifying job parameters 47
EN-10114031-AA 3/164
User manual | | 9750
for parts & service call QLC [phone]

Saving a job 51
Deleting a field 52
Creating/Modifying the printing list 53
Entering Chinese characters 55
Setting the Tacho step 56
Adding/Modifying a field 57
Adding/Modifying a Text field 57
Adding/Modifying a Date field 57
Add/Modify a Time field 61
Add/Modify a Counter field 63
Adding/Modifying an External variable field 66
Adding/Modifying a Symbol field 67
Adding/Modifying a Time stamp field 68
Adding/Modifying a Barcode field 70
Adding/Modifying a Shift code field 77
Information 79
Information zone and information screen 79
History 81
Printer history 81
Troubleshooting 84
Controlling warnings and faults 84
List of warnings and faults 86
Diagnostic wizard 89
Troubleshooting chart 90
Maintenance 93
Description of the print head components 93
Removing the head cover 94
Regular maintenance 95
Cleaning the G head and the M head 96
In-depth G Head cleaning 97
In-depth M Head cleaning 101
Starting up the jet 105
Shutting down the jet 105
Jet troubleshooting 106
EN-10114031-AA 4/164
User manual | | 9750
for parts & service call QLC [phone]

Adjust the break-off point 108
Performing a printing test 109
Inhibiting certain faults 110
Inhibiting certain alarms 110
Procedure for changing the modules 1 to 6 111
Ink pressure pump - Module 1 113
Ink filter - Module 2 116
Ink vacuum pump - Module 3 120
Module 4-Inlet Air filter 123
Hydraulic module - Module 6 124
125
125
Drain and rinse the ink circuit (full draining and flushing of
the ink circuit) 128
Testing the ink circuit 132
Printer configuration 134
Setting the date and time 134
Defining or modifying a screensaver 135
Configuring inputs and outputs 135
Configuring the Parent/Child function 137
Configuring network connections 138
Transferring data 141
External Connections 143
General information 143
External 144
Marking of industrial interface board terminals 145
Operating Characteristics 150
Printing 151
Counter 152
Job selection by parallel interface 152
Warnings and faults 154
Other functions 155
Serial / Ethernet links 155
M12 connector pinouts 157
Technical Specifications 159
Printer dimensions 161
EN-10114031-AA 5/164
User manual | | 9750
for parts & service call QLC [phone]

Print head dimensions 162
Revision 163
EN-10114031-AA 6/164
User manual | | 9750
for parts & service call QLC [phone]

General
Introduction
Thank you for choosing a Markem-Imaje product to fulfill your marking and coding needs.
Because of its architecture, this printer can be used in many configurations. An optimised
design, excellent start/stop quality and easier maintenance make this a printer that is easy
to install, use and service.
Safety Instructions
WARNING: before using the printer, please carefully read the information concerning
safety and installation in the important information and safety manual, the instructions and
the Safety Data Sheet (SDS) for the consumables used.
Update
The information provided in this document is not binding. Markem-Imaje reserves the right
to change the characteristics indicated in this document without notice, including both text
and illustrations. The contents of this document may not be copied, in whole or in part,
without authorisation from Markem-Imaje.
Comments and notes for your Manual
Indicates a tip or further information.
Important information to take into account when using your printer.
Indicates an important note or further information.
EN-10114031-AA 7/164
User manual | General | 9750
for parts & service call QLC [phone]

Description
Printer
This printer was specially designed to be user-friendly and only provides the user with
access to those parts that he needs to use on a daily basis.
This printer includes a user interface with a 10-inch wide, diagonal colour touch screen,
offers real-time display of the remaining printing capacity, consumption tracking, printing
availability and maintenance procedures.
Consumables can be changed quickly and easily thanks, in particular, to front access
without interrupting the current print job.
The front opening and removal of the rear panel offer easy access to the primary com-
ponents.
Maintenance is made easy by replacing maintenance modules, which are accessible from
the front of the printer.
The cabinet is made of stainless steel.
nIP56 (humid and non-dusty environment)
nIP66 option (humid and dusty environment)
EN-10114031-AA 8/164
User manual | Description | 9750
for parts & service call QLC [phone]

Overview
1Printhead
2Umbilical
3Operator interface
4Identification label (serial no.)
5Umbilical outlet (the umbilical outlet may be positioned at 90°)
6Handle for opening the door
7Access door for consumable parts and maintenance modules
8Electrical socket
9ON/OFF switch
10 Access to hydraulic/electric/electronic components
11 Identification label
See "Side view" on page11
EN-10114031-AA 9/164
User manual | Description | 9750
for parts & service call QLC [phone]

Open door overview
12 Additive cartridge
13 Ink cartridge
14 Internal USB port
15 Module 4 - Air in filter IP56 (violet)
16 Module 3 - Recovery pump/Venturi
17 Module 2 - Filter for the primary ink
18 Manual maintenance valve
19 Module 1 - Pressure pump
20 Module 5 - IP56 air out filter (violet) or non-removable IP66 filter (depending on the version)
21 Module 6 - Equipped hydraulic module
22 Standalone compressor kit module (optional)
23 Filter cartridge for the standalone compressor
24 Air Treatment Kit module (optional)
25 Filter cartridge for Air Treatment Kit module
EN-10114031-AA 10/164
User manual | Description | 9750
for parts & service call QLC [phone]