Dover markem-Imaje SmartDate X45 User manual

SmartDate X45
Instruction manual
Printer Overview
User Interface
Start/Stop the Printer
Select a Job
Menu Tree
Clean the Printhead
Change the Ribbon
Information

Instruction manual
Printer overview
2
1Controller User Interface
2Printer and Ribbon Cassette
3Interconnecting Cable
■ System Components
12
3

Instruction manual
Printer overview
3
SmartDate X45 Continuous
SmartDate X45 Intermittent
■ Printer Type

Instruction manual
Printer Overview
4
■ Connecting the Power
■ Power On/Off

Instruction manual
Printer Overview
5
Producing
Not Producing
Fault
Busy

Instruction manual
User Interface
6
Idle 15/10/2020
Start
96 %
Tools
Off
Total print count
Batch print count
110
5904
Select Job
Adjust
11:56
Operator
UserProle Printer Status
System Date/Time
Consumables Panel
Menu Panel
Information Panel
Zoom
Job Preview
Current Substrate Speed
Instant Average Pack Rate
0
22
default job
Selected job
Use By
19th May 2022
Packed in UK

Instruction manual
Start/Stop the Printer
7
■ Starting the Printer
Operator
Start
Select Job
Adjust
Tools
Off
Idle 11:56
15/10/2020
100%
default job
Use By
19th May 2022
Packed in UK Total print count
Batch print count
110
5904
Current Substrate Speed
Instant Average Pack Rate
0
22
■ Stopping the Printer
Operator Execute 11:56
15/10/2020
Start
Select Job
Adjust
Tools
Off
100%
default job
Use By
19th May 2022
Packed in UK Total print count
Batch print count
110
5904
Current Substrate Speed
Instant Average Pack Rate
254
22

Safety
Instruction manual
Select a Job
8
1
Idle 15/10/2020
Start
96 %
Tools
Off
Total print count
Batch print count
110
5904
Select Job
Adjust
11:56
Operator
Current Substrate Speed
Instant Average Pack Rate
0
22
default job
Use By
19th May 2022
Packed in UK
2
Job 1
Field1
Send to PrintModify Accept
Field2
Field3
Field4
BEST BEFORE
21 JUL 2021
Produced in
Portugal
BEST BEFORE
21 JUL 2021
Produced in
Portugal

Safety
Instruction manual
Select a Job
9
3
Job 1
Field1
Send to PrintModify Accept
Field2
Field3
Field4
BEST BEFORE
21 JUL 2021
Produced in
Portugal
BEST BEFORE
21 JUL 2021
Produced in
Portugal
4
Job selection in progress...
Information

Safety
Instruction manual
Menu Tree
10
Home
Select job
Adjust
Tools
Test print
Registration
Offset
Print Darkness
Rotation
SelectProle
Information
Help
Maintenance
Job
System
Counts
Diagnostic
Events Log
SpeedProleGraph
Guide
About License
Supervisor
Operator
Administrator
Statistics
Printhead
MI Sigma
Select Printhead Test
Pattern
www.markem-imaje.com

Safety
Instruction manual
Menu Tree Clean the Printhead
11
Clean the printhead regularly using Markem-Imaje printhead wipes.
1
Remove the cassette and allow the printhead to cool
2
Use a Markem-Imaje printhead cleaning wipe to remove any residue
from the printhead
Do not use abrasive materials or tools such as
screwdrivers or knives to clean the printhead.

Safety
Instruction manual
Changing the ribbon
1
2
12
Remove the cassette
Remove the used ribbon and waste cores

Safety
Instruction manual
Changing the ribbon
3
13
Load the new ribbon following the ribbon load diagram on the
cassette
i ii
iii iv

Instruction manual
Information
14
■ Faults
A fault will stop the printer. The fault causing the condition must be
xed before printing can continue.
■ Warnings
A warning will not stop the printer, but will highlight information or a
condition that may require attention.
1300
Cassette Open
2005
Possible Damage To Print
Exit
Clear Exit

Safety
Instruction manual
Information
15
■ Common Faults and Warnings
LOW RIBBON
The ribbon will soon run out; prepare a new ribbon.
CASSETTE OPEN
The cassette latch is open; close it.
CALIBRATION FAILED
The ribbon has broken during calibration; reload the ribbon and try
again.
RIBBON BREAK DETECTED
The ribbon has broken during printing; reload the ribbon and try
again.
www.markem-imaje.com

Instruction manual
Information
16
S/N: Serial number:
Ribbon type:
For Marking & Coding Equipment. Photographs and drawings are not binding in detail. This document was originally written in
English. The English text of this document shall alone be authentic and shall prevail in the event of a dispute. Markem-Imaje
reserves the right to modify the specications of its products without prior notice. Any reproduction, even partial, of this document
is prohibited. Original Manual.
© 2019 Markem-Imaje All Rights Reserved. English version

Safety
Instruction manual
Information
17

TSS - User Documentation
Markem-Imaje Limited
Nottingham Science Park
University Boulevard
Nottingham NG7 2QN
UK
www.markem-imaje.com 10099182-AB 08/2019 en