Dream On Me 795 AI User manual

Read all instructions before assembling and using product.
IMPORTANT - Keep Instructions for future use.
0921R1-795
Owner’s Manual
2-IN-1 TODDLER
FUNTASTIC TOWER AND STEP STOOL
Scan the QR code to register your product
https://dreamonme.com/customercare/registration/

23
www.dreamonme.com/help www.dreamonme.com/help
SAFETY TIPS
Adult Assembly
Required.
DO NOT use the
product if it is
damaged, broken,
and/or components are
missing or broken.
You may need to
provide the following
tools: (NOT INCLUDED
IN BOX)
1.Philips Head screw
driver
2.Flat head screw
driver
3.Hammer
To protect your parts
during assembly
please place them on a
soft surface.
Contact Dream On Me
In case of any
assistance needed.
Small parts may
present choking
hazard prior to
assembly.
Please follow the
simple step-by-step
pictorial instructions
to assemble your
product.
DO NOT Use Power
Drills or Drivers.
To clean surface, use
only water on a damp
cloth. Do not use
window cleaner or
cleaning abrasive as it
will scratch the
surface and could
damage the protective
coating.
0-6
…. for choosing Dream On Me Inc. and Congratulations on
joining our family; a family that has been transforming lives for
30 years! We appreciate your feedback and wish you the very
best in the coming years with your new addition. If you have
any questions or concerns, please don’t hesitate to reach out
to us. One of our trusted Customer Care representatives will be
happy to assist you. Thank you again for entrusting us to
provide you with safe and sturdy products for your family!
THANK YOU...!
LIMITED WARRANTY:
• Dream On Me warrants its product to be free from defects in
material and workmanship, and agrees to remedy any such defect.
• This warranty covers 1 year from the date of original purchase.
• This warranty is valid only upon presentation of proof of purchase.
• This is solely limited to the repair or replacement of defective
furniture components and no assembly labor is included.
• This warranty does not apply to any product which has been
improperly assembled, subjected to misuse or abuse, or which has
been altered or repaired in any way.
• This warranty gives you specific legal rights, and any other legal
right as allowed by your State.

45
WARNINGS
WARNING
PREVENT SERIOUS INJURY OR DEATH FROM FALLS OR TIPPING
OVER: NEVER PLACE CHILD AND PRODUCT ON AN ELEVATED
SURFACE!
• ADULT ASSEMBLY required.
• NEVER leave the child unattended.
• ALWAYS keep the child within arm’s reach.
• ALWAYS place the product on a flat, level surface.
• NEVER place the product near the stairs.
• ALWAYS ensure this unit is placed away from dangerous objects or
appliances, such as a stove, oven, electrical outlets, etc.
• This product is not suitable if the Child’s arm is below the safety rail
and the waist is below the Guardrail.
• Age Limit: 18 months - 3 years with weight limit of 150 LBS or 70 KG.
CHOKING HAZARD:
• Unassembled small parts can be a choking hazard to children. For the
safety of your child, it is recommended to not assemble this unit with
them in the same room due to concerns that they may pick up and
swallow small parts.
• NEVER use this product if there are any loose or missing fasteners,
loose joints, or broken parts.
• CHECK after assembly and periodically use at least once a week.
• NEVER substitute parts.
OPERATING INSTRUCTIONS:
• Children must not use this product until assembly is completed and
the platform is set up on a level surface. For the first use, an adult
should show the child how to use this product.
• Adult supervision is required. Children should be instructed not to use
this product in any manner other than intended.
• Children should be instructed not to climb on product when it is wet.
• DO NOT attach items to this product that may be potential
strangulation hazards (such as, but not limited to, pet leashes, ropes,
chains, etc.).
• Children should be dressed appropriately. Avoid loose-fitting clothing
and potentially hazardous items such as ponchos and scarves.
www.dreamonme.com/help www.dreamonme.com/help
1 2 3
PARTS
If there are any missing parts, please contact Dream On Me before
using the product.
Right Guard Rail
Frame
Left Guard Rail
Frame
Top Guard Rails
4 5 6Right Stool Frame Left Stool Frame Bottom Guard
Rail

67www.dreamonme.com/help www.dreamonme.com/help
A
789
10 11 12
PARTS (Cont.)
If there are any missing parts, please contact Dream On Me before
using the product.
HARDWARE
If there are any missing parts, please contact Dream On Me before
using the product.
Allen Head Bolt 2-1/8” (×14) Allen Head Bolt 1-3/4” (×6)
B
CAllen Head Bolt 1-3/16” (×4) DBarrel Nuts (×14)
EWood Dowels 1-1/4” (×8) FAllen Key (×1)
GAnti-Slip Stripes (38x2cm)(×2) HAnti-Slip Stripes (×4)
Platform
Front and Rear
Platform Support
Rails
Rear Lower-end
Support Rail
Safety Rail
Foot Step Support
Rail
Foot Step

89
www.dreamonme.com/help www.dreamonme.com/help
2
LEARNING TOWER ASSEMBLY - PLATFORM AND
SAFETY RAIL ASSEMBLY
1
LEARNING TOWER ASSEMBLY - GUARD RAILS
ASSEMBLY
7
7
12
(D)
(A)
(C)
1
(E)
1
2
3
3
6
6
1a. Align the Right Guard Rail
Frame (1), Wood Dowel
(E), Top Guard Rails (3)
both front and back, and
another Wood Dowel (E)
and Left Guard Rail Frame
(2) as shown in the
diagram. Also, include the
Barrel Nuts (D) at both the
end of the Top Guard
Rails from below.
1b. Secure them with the
Allen Head Bolt 2-1/8” (A)
on all the top four corners
as depicted with the help
of Allen Key (F) provided.
1c. Similarly, assemble the
Bottom Guard Rail (6) with
the help of Wood Dowels
(E) on both the ends,
secure the Barrel Nuts (D)
from behind the Bottom
Guard Rail (6), as shown
in the diagram.
2a. Align the Platform (7) at the
bottom of the Right and Left
Guard Rail Frames (1 and 2).
2b. Attach both with the Allen
Head Bolt 1-3/16” (C) at all
the four corners of the
platform to the Guard Rail
Frames.
2c. Locate the holes at the
center of the Right and Left
Guard Rails. Simply insert
the Safety Rail (12), and turn
it towards the inside to
secure it in place. Refer the
diagram.
AAllen Head Bolt 2-1/8” (×14) DBarrel Nuts (×14) EWood Dowels 1-1/4” (×8)
CAllen Head Bolt 1-3/16” (×4)

4
3
LEARNING TOWER ASSEMBLY - FOOTSTEP
ASSEMBLY
10 11
www.dreamonme.com/help www.dreamonme.com/help
LEARNING TOWER ASSEMBLY- STOOL FRAME
ASSEMBLY
(B)
(B)
9
4
8
5
5
10
10
11
(D)
(E)
(A)
3a. Align the Foot Step (9)
and Foot Step Support
Rail (8) as shown in the
diagram.
3b. Insert the Allen Head Bolt
1-3/4” (B) from the
bottom of the Foot Step
Support Rail (8) and
tighten with the help of
the Allen Key (F).
3c. Remove the adhesive
sticker from the Anti-Slip
Stripes (G) and paste it on
the Foot Step (9) as
shown in the diagram.
4a. Align the Right Stool
Frame (4), Front and
Rear Platform
Support Rails (10)
and Rear Lower
Support Rail (11),
and the Footstep
Assembled above.
Insert the Barrel
Nuts (D) as shown in
the diagram.
4b. Attach all the above
by inserting the
Allen Head Bolt
2-1/8” (A) and
securing the same
with Allen Key (F).
EWood Dowels 1-1/4” (×8)
Allen Head Bolt 1-3/4” (×6)
B
AAllen Head Bolt 2-1/8” (×14) DBarrel Nuts (×14)
(E)
(G)

12 13
www.dreamonme.com/help www.dreamonme.com/help
5
LEARNING TOWER ASSEMBLY - STOOL AND
GUARD RAIL ASSEMBLY
1
STEP STOOL ASSEMBLY
(B) (B)
(B)
(B)
(H)
(H)
(B)
(B)
(B)
(B)
5a. Place the fully
assembled Guard Rail
upside down, and
place the fully
assembled Stool
Frame upside-down
above it.
5b. Locate the holes on
four corners of the
platform, ensure they
are aligned, and insert the Allen
Head Bolt 1-3/4” (B). Secure them
with the Allen Key (F) provided.
5c. Remove the adhesive sticker from
the Anti-Slip Stripes (H) and paste
them under all four feet as shown in
the diagram.
1a. Follow the Stool Frame
Assembly along with the
Footstep Assembly
explained previously.
1b. Place the Platform (7)
upside-down and place
the fully assembled Stool
Frame in upside-down
position as shown in diagram.
1c. Locate the holes at the four
corners, ensure they are aligned,
and insert the Allen Head Bolt
1-3/4” (B). Tighten the same with
Allen Key (F).
1d. Remove the adhesive sticker
from the Anti-Slip Stripes (H) and
paste them under all four feet as
shown in the diagram.
Allen Head Bolt 1-3/4” (×6)
B
Allen Head Bolt 1-3/4” (×6)
B
Allen Head Bolt 1-3/4” (×6)

PRODUCT CARE AND MAINTENANCE
14 www.dreamonme.com/help
Congratulations Mom & Dad !
YOU DID IT...!
Here’s to new milestones and fun with your little ones.
1532 S. WASHINGTON AVENUE
PISCATAWAY, NJ 08854
www.dreamonme.com
Follow Us @dreamonmeinc
to get your nursery featured on our social media.
Enter our monthly giveaway!
Scan the QR code to register.
Chat with us!
Scan the QR code to Live Chat.
• Adults should check all screws weekly or if the product gets
loose and or wobbly, and tighten as and if necessary. If the
product continues to not be sturdy, then halt use of the product
immediately and contact the Dream On Me Customer Support at
the earliest via email: [email protected], or through the Live
Chat feature on our website (www.dreamonme.com).
CLEANING INSTRUCTIONS:
• With a damp cloth, use mild liquid dish soap to wipe clean the
product. You may want to clean the underside first to make sure
you are not damaging the finish.