Dreame R10 User manual

Dreame R10
Cordless Stick Vacuum
User Manual

• Theword"dreame"istheabbreviationofDreameTechnologyCo.,Ltd.anditssubsidiariesinChina.Itis
thetransliterationofthecompany'sChinesename"追觅",whichmeansstrivingforexcellencein
everyendeavorandreflectsthecompany'svisionofcontinuouspursuit,explorationandsearchin
technology.
Formoreinformation&after-salessupport,contactusvia
[e-mail]orhttps://global.dreametech.com
Manufacturedby:DreameTrading(Tianjin)Co.,Ltd.
MadeinChina
VTV22B-EU-A00 16/02/2023

THANK YOU
FOR PURCHASING THIS DREAME
VACUUM CLEANER.
With it you are obtaining a high quality product that is engineered for
optimal performance. If you have any questions on the product, please
contact us: [e-mail].
RegistrationQuickStart
Welcome to register a Dreame account
by scanning the QR code.
You are available for the User Manual
and Special O󽗈ers.

1
EN
SafetyInstructions
Warning
Topreventaccidentsincludingelectricshockor󽗉recausedbyimproperuse,please
readthismanualcarefullybeforeuseandretainitforfuturereference.
• Thisproductcanbeusedbychildrenagedfrom8yearsandaboveandpersons
withphysical,sensory,intellectualdeficiencies,orlimitedexperienceorknowledge
underthesupervisionofaparentorguardiantoensuresafeoperationandto
avoidanyriskofhazards.Cleaningandmaintenanceshallnotbemadebychildren
withoutsupervision.
• Thevacuumisnotatoy.Childrenshallnotplaywithoroperatethisproduct.Please
exercisecautionwhenusingthevacuumnearchildren.Donotallowchildrento
cleanormaintainthevacuumunlesssupervisedbyaparentorguardian.
• Donotusethevacuumoutdoorsoronwetsurfaces.Onlyusethevacuumondry
indoorsurfaces.Donottouchtheplugoranypartofthevacuumwithwethands.
• Toreducetheriskoffire,explosion,orinjury,checktomakesurethelithiumbattery
andchargingadapterareundamagedbeforeuse.Donotusethevacuumifeither
thelithiumbatteryorchargerisdamaged.
• Themulti-surfacebrush,motorizedmini-brush,battery,metalconnectorpin,and
vacuumareelectricallyconductiveandshouldnotbeimmersedinwaterorother
liquid.Makesuretodryallfiltersaftercleaning.
• Preventinjurycausedbymovingparts.Turnoffthevacuumbeforecleaningthe
multi-surfacebrush.Themulti-surfacebrush,dustcompartmentandfiltermustall
beproperlyinstalledbeforeusingthevacuum.
• Onlyusetheoriginalchargingadapter.Neveruseanunoriginaladapter,asthismay
causethelithiumbatterytocatchfire.
• Donotusethevacuumtopickupflammableorcombustibleliquids,suchas
gasoline,orbleach,ammonia,draincleanersorotherliquids.
• Donotusethevacuumtopickupsharporhardobjects,suchasglass,nails,screws,
orcoins,whichmaydamagethemachine.Donotusethevacuumtopickupdrywall
particles,asheslikefireplaceash,orsmokingorburningmaterialssuchascoal,
cigarettebuttsormatches.
• Checktheareatobecleanedbeforeuse.Topreventtheopeningsfrombeing
blocked,clearthelargerpaper,spitball,plasticclothorsharpobjects(suchasglass,
nails,screws,coins,etc.)andanyobjectwhichislargerthanopenings.
• Keephair,looseclothing,fingersandotherpartsofthebodyawayfromthe
vacuum'sopeningsandmovingparts.Donotpointtheextensionrod,wandortools
atyoureyesorearsorputtheminyourmouth.
• Donotputanyobjectintothevacuum'sopenings.Donotusethevacuum
withanyopeningblocked.Keepfreeofdust,lint,hair,orotheritemswhichmay
reduceairflow.
• Donotrestthevacuumagainstachair,table,orotherunstablesurface,asthismay
causedamagetothemachineorpersonalinjury.Ifthevacuumbecomesdamaged

2
EN frombeingknockedoverorisotherwisemalfunctioning,pleasecontactour
authorizedservicedepartment.Neverattempttodisassemblethedeviceonyour
own.
• Allinstructionsinthemanualforrechargingthebatterymustbestrictlyfollowed.
Failuretoproperlychargethebatterywithinthespecifiedtemperaturerangecould
damagethebattery.
• Onlyuseaccessoriesandreplacementpartsrecommendedbythemanufacturer.
• Pleasebeextracarefulwhenusingthevacuumtocleanstairs.
• Makesurethevacuumisunpluggedwhennotusedforextendedperiodsaswellas
priortoperforminganymaintenanceorrepairs.
• Donotinstall,charge,orusethisproductoutdoors,inbathrooms,oraroundapool.
• FireHazardWarning:Donotapplyanytypeoffragrancetothevacuum'sfilter.These
typesofproductsareknowntocontainflammablechemicalswhichmaycausethe
vacuumtocatchfire.
• Onlyusetheoriginalcharger(ModelYLS0251B-E300080).Failingtodosomaycause
thelithium-ionbatterytocatchfire.
• Onlyusetheapprovedbatterytype(ModelV2309-7S1P-BCA).Failingtodosomay
causethelithium-ionbatterytocatchfire.
• Ifthebatterymaterialisreleased,removepersonnelfromareauntilthebatteries
cooldownandfumesdissipate.
• Providemaximumventilationtoclearouthazardousgasesandavoidskinandeye
contactorinhalationofvapors.
• Removespilledliquidwithabsorbentandincineratewaste.
• Donotuseandstoreinextremelyhotorcoldenvironments(below0℃/32°For
above40℃/104°F).Pleasechargethecordlessvacuumintemperatureabove0℃
/32°Fandbelow40℃/104°F.
• Thisproductisdesignedforhomeuseonly.
We,DreameTrading(Tianjin)Co.,Ltd.,hereby,declaresthatthisequipmentisin
compliancewiththeapplicableDirectivesandEuropeanNorms,andamendments.
ThefulltextoftheEUdeclarationofconformityisavailableatthefollowinginternet
address:https://global.dreametech.com
Fordetailede-manual,pleasegotohttps://global.dreametech.com/pages/user-
manuals-and-faqs

3
EN
ProductOverview
Component Names
Extension Rod
Release Button
Brush Release
Button
Extension Rod
Multi-Surface
Brush
On/Off Switch
Dust Cup
Dust Cup Bottom
Cover Release
Button
Battery Release
Button
• Press to turn on
• Release to turn off
LED Battery Status
Indicator
Antistatic Contact
Charging Port
Trigger Switch Lock
Lock Indicator
When the vacuum is running,
press briefly to switch to
discontinuous/continuous
cleaning mode
Suction Level Switch
Turbo
Med
Eco

4
EN ProductOverview
Accessories
Note: The images in this manual are for illustrative purposes only. The actual product may differ.
Wall Mount
(Including screw × 2, wall plug × 2, and
mounting template sticker )
Extension Rod Multi-Surface Brush
Wide Combination Tool
Charger
Motorized Mini-Brush
FlexibleCombinationTool

5
EN
Installation
Click
Click

6
EN
Wall Mount Installation Diagram
1. Paste the mounting template sticker on the wall. The bottom edge of the mounting template
sticker should be parallel to and about 107 cm from the ground.
2. Use a power drill with an 8 mm drill bit to drill a hole into each marker on the mounting
template sticker, then insert a wall plug into each hole.
3. Align the holes on the mount with the holes on the wall. Fasten it to the wall with the
included screws.
Installation
107 cm
Note:
• Thewallmountisanoptionalaccessory.Youcaninstallitbasedonyourneeds.
• Thewallmountshouldbeinstalledonacool,drysurfacewithanelectricaloutletnearby.
Priortoinstalling,ensurethattherearenoelectricalwiresorpipesinthespacedirectly
behindinstallmentposition.

7
EN
Charging
Note:
• Afullchargewilltakeapproximately3.5hours.
• UsingTurbomodeforaprolongedperiodwillcausethebatterytoheatup,which
increaseschargingtime.Allowthevacuumtocooldownfor30minutesbefore
chargingit.
LEDBatteryStatusIndicator
Note: Once the vacuum is fully charged, the indicator will turn off after 5 minutes, and the
vacuum will enter the energy-saving mode.
ChargingtheVacuumwiththeCharger
Charging Methods
Fully charge the vacuum before using it for the first time.
Off Blinking On
Low battery
Half battery
Nearly full
Fully charged

8
EN HowtoUse
Method2:ContinuousCleaningMode(TriggerSwitchLock)
Click the trigger switch lock to switch to Continuous Cleaning Mode when the vacuum is
running. Then release the on/off switch to make the vacuum in Continuous Cleaning Mode.
Use the trigger switch lock to free your fingers and avoid finger fatigue caused by holding the
switch.
Note:
• In this mode, the lock indicator will illuminate steadily.
• Click the trigger switch lock again to quit the Continuous Cleaning Mode.
Working Methods
Method1:DiscontinuousCleaningMode
Press and hold the on/off switch to power it on, and release it to stop immediately.
Select from two working methods for the vacuum, based on your needs.

9
EN
Using Di󽗈erent Accessories
Multi-SurfaceBrush
Suitable for vacuuming on the med/low pile
carpets, tiles and floors.
For vacuuming large particles by turning
on the switch on the brush, such as coffee
beans, corn flakes and etc.
MotorizedMini-Brush
For vacuuming dirt, pet hair, and other
stubborn debris from sofas, bedding, and
other fabric surfaces.
HowtoUse
缩放8%，旋转-5
WideCombinationTool
For vacuuming curtains, keyboards,
ceilings, sofas, vehicle interiors, coffee
tables, etc.
Note:Itisnotrecommendedtovacuumon
fragilesurfaces,suchassilk.
FlexibleCombinationTool
Bendable and retractable brush-nozzle,
more flexible to vacuum in narrow gaps.
Note:
• The multi-surface brush can be attached
directly to the vacuum.
• When the appliance starts, the lights in front
of the brush roller will automatically turn on,
which is convenient for use.

10
EN
WallMount
The vacuum cleaner can be placed on the wall mount when it is not in use.
Note:
• Do not put the vacuum cleaner alone on the wall mount.
• Place it on the wall mount after connecting it with the extension rod and the multi-surface
brush.
HowtoUse
Note:
• Ifanyrotatingpartbecomesstuck,thevacuummayshuto󽗈automatically.Removeany
trappedforeignobjects,thenresumeuse.
• Whenthemotorbecomesoverheated,thevacuumwillautomaticallyshuto󽗈.Waituntil
thebatterytemperaturereturnstonormal,thenresumeuse.

11
EN
Care&Maintenance
Tips:
Cleaning the Vacuum
Cleaning the Dust Cup, Pre-Filter, and Cyclone Assembly
1. Always use genuine parts to keep your warranty from being void.
2. If the filter or nozzle becomes clogged, the vacuum will stop working shortly after being
turned on. Clear the tube to restore functionality.
3. If the vacuum is not used for an extended period, fully charge it, unplug its charger, and
store it in a cool, low-humidity environment away from direct sunlight. To avoid over-
discharging the battery, recharge the vacuum at least once every three months.
Wipe the vacuum with a soft dry cloth.
The vacuum's cleaning ability will be reduced if the dust cup is filled to the "MAX" mark. To
regain performance, empty the dust cup in a timely manner. Before emptying the dust cup,
make sure the vacuum is disconnected from the power, and do not press its power button.
2. Push the dust cup release switch in the direction indicated by the arrow, then gently remove
the dust cup from the vacuum.
1. Press the dust cup bottom cover release button, then empty the contents.
1
1
2

12
EN Care&Maintenance
3. Remove the pre-filter first, then lift the handle of the cyclone assembly and turn it
counterclockwise until it stops, then pull to lift out the cyclone assembly.
Note:
• It is recommended to clean the dust cup once every month.
• It is recommended to clean the pre-filter at least once every 3 months and the cyclone
system at least once every 6 months.
Pre-FilterCyclone Assembly
5. Rinse the cyclone assembly and pre-󽗉lter until they are clean. After washing, air dry for
at least 24 hours .
12
6
111
57
210
48
39 24 hrs
4. Wipe the dust cup with a soft wet cloth. Pay attention to wringing out the cloth before
using.
To avoid the risk of
electric shock, do
not rinse the dust
cup with water.
1
2
3

13
EN
Installing the Dust Cup, Pre-Filter, and Cyclone Assembly
1. Insert the cyclone assembly vertically into the dust cup, and make sure that the handle of
the cyclone assembly line up with the slot on the left side of the dust cup. Turn the handle
clockwise until it locks, then flip the handle down.
2. Place the pre-filter with its front side facing up into the cyclone assembly.
3. Slightly tilt the dust cup so the slot aligns with the clip on the vacuum. Then gently push the
dust cup until it clicks into place.
Care&Maintenance
3
1
2
3

14
EN
Cleaning the Filter
It is recommended to clean the filter once every 4 to 6 months.
1. Remove the dust cup as shown in the
figure.
3. Clean the filter with clean water. Make
sure you rotate the filter 360° to thoroughly
and remove all dust caught in the filter.
Lightly tap the filter several times to remove
any excess dirt.
Note:
• Only use clean water to wash the filter. Do not use detergent.
• Do not attempt to clean the filter with a brush or finger.
2. Remove the filter from the vacuum by
pulling it down in the direction shown in the
figure.
4. Allow the filter to air dry for 24 hours.
12
6
111
57
210
48
39 24 hrs
12
6
111
57
210
48
39 24 hrs
Care&Maintenance
2
1

15
EN
Installing the Filter
1. Insert the filter into the vacuum and
gently press down, as illustrated.
2. Reinstall the dust cup.
Care&Maintenance

16
EN
Cleaning the Multi-Surface Brush
1. Turn the lock counterclockwise until it
stops, then remove the roller from the roller
brush.
2.Usescissorstocuto󽗈thehairsand
󽗉bersthatgetstuckonthebrushroller.
Wipethedustfromthenotchand
transparentcoverwithadryclothorpaper
towel.Thoroughlydrybeforeuse.
3. When it is dirty, rinse the brush roller
with clean water until it is clean.
4. Stand the brush roller upright for at least
24 hours until it is fully dry.
Care&Maintenance
12
6
111
57
210
48
39 24 hrs

17
EN
Cleaning the Motorized Mini-Brush
1. Use a coin as illustrated to rotate the lock
counterclockwise until you hear a click.
3. Stand the brush roller upright in a well-
ventilated area for at least 24 hours until
it is fully dry.
2. After unlocking the motorized mini-brush,
remove the brush roller, then rinse and
clean it.
4. Once the brush roller is dry, reinstall it by
following the disassembly steps in reverse.
12
6
111
57
210
48
39 24 hrs
Care&Maintenance