Drive Medical 13078 User manual

pneumatic revolving stool
www.drivemedical.com
www.drivemedical.com
EU Authorized Representative
Drive International, LLC
Globe Lane - Stockport
DUKINFIELD SK16 4RE, GB

adjustment
assembly
To adjust, pull up on handle and move up or
down to desired height. Release handle to secure
in place.
1. Remove contents from box.
2. Place base flat on the ground. Insert
pneumatic cylinder into base. Make sure the
silver end is at the top.
3. Assemble cushion on top of the pneumatic
cylinder. Make sure it is seccure.
4. Insert castors into the base. Make sure the
castors are tightened in the castor holes.
lifetime limited
warranty
Your Drive brand product is warranted to be free
of defects in materials and workmanship for the
lifetime of the original consumer purchaser.
This device was built to exacting standards
and carefully inspected prior to shipment. This
Lifetime Limited Warranty is an expression of our
confidence in the materials and workmanship of
our products and our assurance to the consumer
of years of dependable service.
In the event of a defect covered by this
warranty, we will, at our option, repair or replace
the device.
This warranty does not cover device failure
due to owner misuse or negligence, or normal
wear and tear. The warranty does not extend to
non-durable components, such as rubber
accessories, casters, and grips, which are subject
to normal wear and need periodic replacement.
If you have a question about your Drive device or
this warranty, please contact an authorized Drive
dealer.
© 2006 Medical Depot, Inc. All rights reserved.
Drive is a trademark of Medical Depot, Inc.
Port Washington N.Y. 11050 USA Made in China
13078 10379
Pneumatic
Cylinder
Base
Castors
Cushion
Height
Adjusment Lever