Drive Medical RTL10266CF User manual

NITRO ELITE CF ROLLATOR
ITEM # RTL10266CF
www.drivedevilbiss.co.uk

Issued (06/17)
1
7
8
2
4
11
6
3
5
10
9
12
12
PARTS LIST
1. Handgrip
2. Adjustable tubing handgrip
3. Rear reflector on handgrip
4. Brake lever
5. Interlock button for handgrips
6. Back Rest
7. Seat
8. Bag
9. Front wheel
10. Brake adjust screw
11. Rear wheel
12. Cane Holder
Item # RTL10266CF
WEIGHT CAPACITY: 136kg (21st)

1
The Nitro is a technical aid for a single user with limited mobility. The Nitro Elite is
ideal for indoor and outdoor use, and helps the user to walk and prevent falls.
1. Bag
2. Back Rest
INTRODUCTION
NITRO INCLUDES:
UNFOLDING THE NITRO
Position the Rollator on its wheels. Open
the Rollator. Press the tubes attached to the
seat downwards until they lock into position
(figure 1).
REMOVING / ATTACHING THE CARRY BAG
To attach the bag, fold the Nitro slightly
and affix the bag with the hook and loop
fasteners to the tubes located on the
front end of the seat frame
(figure 2).
42
3. Cane Holder
4 Operating Instructions
Issued (06/17)

HEIGHT ADJUSTMENT
BRAKING / LOCKING
Pull both brake levers upwards to apply the brakes
(see figure 4). Always apply brake pressure evenly.
To lock the brakes, ensure the Nitro is stationary,
and press both brake levers down until they lock
into position (see figure 7).
To release the brakes from the locked position,
pull up on the brake levers.
Regularly test the brakes.
4
5
Press and hold down the white release
buttons as shown in figure 3.
Simultaneously move the handgrip
up or down. When the desired
height is reached, let go of the white
release buttons and the handgrip
will automatically lock into the next
possible height position.
3
Issued (06/17)

SAFETY INSTRUCTIONS
• Use only as a walking aid!
• Use only on even and solid surfaces.
• Maximum user weight: 136kg (21st)
• Regularly check the screws and fasteners on the Nitro and retighten if necessary.
• Use bag only for transport of objects and do not overload. Maximum load: 5kg
• Do not expose the product to temperatures above 40°C for an extended period
of time, as this can cause the Nitro parts to overheat and burn the user.
• Please make sure the Rollator is fully opened, seat is down and the folding bar
under seat is locked in the down position.
• Be sure that both knobs are fully tightened and are at equal heights. Test
Rollator for stability before applying full weight to hand grips.
• Test the brake lever before operating the Rollator. When wheels are locked, lock
bar on rear wheels should prevent wheels from turning. When locks are released,
the wheels should turn freely.
• Always lock the brake lever before sitting and do not use seat when unit is on an
incline or uneven ground.
• Replace tyres when significantly worn or damaged.
• DO NOT MOVE ROLLATOR WHILE SEATED. This is a walking aid only
and is not to be used as a transportation device.
CLEANING / MAINTENANCE
Clean regularly by hand with a damp cloth. Do not use aggressive detergents.
Issued (06/17)