DT Research DT122 Assembly instructions

DT122
ENGLISH
BASIC OPERATION GUIDE
DT122
Embedded Controller/
System
Note: The actual package contents may vary depending on the configuraon acquired.
ENGLISH 4
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2012, DT Research, Inc. All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of Embedded Controller/ System
devices - the DT122, featuring compact, robust construcon powered by the energy efficient Intel®
Atom processor. The DT122 supports major embedded operang systems as well as Microso®
Windows® XP Embedded and Windows® XP Pro and provides complete soluons for a variety of
compung needs. The user is offered a choice of soware soluons on a plaorm characterized by
the following:
High-integraon and energy-efficient processor technology•
Expanded graphics capabilies for mulmedia applicaons•
Robust construcon for reliable operaon•
Cost-effecve compung in compact packaging•
Package Contents
DT122
AC/DC Power Adapter
VESA Bracket
Basic Operaon Guide
2
2
3
3
4
11
Opons
The DT122 is designed to work with a range of custom and off-the-shelf opons to enhance its
applicability for various deployments.
Built-in wireless LAN, with external antenna•
BOG071812DT122ENG
SPECIFICATIONS
System
Processor Intel® Atom™ Z530, 1.6GHz
GPU Poulsbo SCH
Memory (RAM) 2GB
Storage 8GB to 16GB Flash or 32GB to 64GB SSD
Operang Systems Microso® Windows® XP Embedded or Windows® XP Pro for
Embedded Systems
Display Resoluon Up to 1280 x 1024
Network Interface 10/ 100/ 1000Mb BaseT LAN;
Wi-Fi 802.11a/b/g or Wi-Fi 802.11a/b/g/n (oponal)
Expansion PCI Express
Input/Output Ports
1 HDMI connector; 1 DVI port; 12V DC-in jack;
2 Audio jacks (Microphone-in, Line-in, Headphone-Out jacks);
4 USB 2.0 ports; RJ45 connector for Ethernet;
Wi-Fi dipole antenna (oponal)
Power
AC/DC Adapter Input: 100 – 240V AC; Output: 12V DC
Mechanical
Enclosure Aluminum + steel
Dimensions (H x W x D) 1.4 x 5.5 x 5.1 in/ 35 x 140 x 130 mm
Weight 0.88 lbs/ 400 g
Environmental
Regulatory FCC Class B, CE, C-Tick, UL, RoHS compliant
Temperature Operaon: 0°C - 40°C; Storage: -20°C - 60°C
Humidity 0% - 90% non-condensing
* Specificaons subject to change without noce.

DT122
ENGLISH 23ENGLISH
THE DT122
Powering ON and OFF
The Power Buon is located in the front of the DT122. The Power Buon may be configured to
funcon differently depending on the power opons of the operang system. In general, to turn the
DT122 on, push and release the Power Buon on the front bezel. The adjacent power LED will be lit
(blue) and the corresponding interface will be displayed on the display monitor.
To turn offthe device, again depending on soware operang system, push and release the Power
Buon or use a soware shutdown interface. In the event of system lockup, the Power Buon may
be used to perform a reset on the device. To do that, push and hold the Power Buon for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Buon
again will restart the device.
Device Ports
The DT122 features an opmal set of I/O ports while preserving the compact size of the system. The
HDMI connector, Network (10/100/1000 BaseT Ethernet), and Power ports are supplemented by a
set of four USB 2.0 and two Audio ports. Through its USB ports, the DT122 supports a wide range
of USB-based peripherals. These peripherals are applicable in providing the means for soware
installaon, applicaon storage, data storage, and system soware recovery and updates.
Memory and Storage
The DT122 may be available in storage configuraons ranging 8GB to 16GB of flash memory or
32GB to 64GB SSD. Depending on base soware configuraon, the user may use the internal
memory of the DT122 for user’s installed soware and storage. The user may also supplement
storage space with USB-based peripherals such as flash disks, disk drives, etc. RAM capacity is up to
2GB.
VESA Mounng Bracket Installaon Guide for DT122
The DT122 package includes a VESA-compliant mounng bracket (1) which mounts the DT122 (2)
onto a VESA-compable monitor or display.
NOTE: The VESA Mounng Bracket is compable with most displays and monitors that support the VESA standard.
Precauons
Always exercise care when operang and handling the DT122.•
Never disassemble any poron of the enclosure. It will void any product warranty on the DT122.•
Do not use any AC/DC adapter other than the one provided with the device or acquired from the•
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power•
down the DT122 and disconnect all power sources.
Please report the problem to your device provider immediately.•
Rear ViewFront View
A B C D FE GH
DC-in
USB ports (2)
DVI port
HDMI port
Ethernet port
D
F
E
G
H
A
B
C
USB ports (2)
Power buon
Audio jacks
Step1:
Locate the exisng mounng holes on•
the monitor.
Line the bracket holes up with the holes•
on the back of the monitor, as shown
to the right.
Place the screws to hold the mounng•
bracket in place and ghten the screws
(do not over-ghten).
Step2:
Remove the two M3 screws (3) originally•
on the DT122 signage appliance.
Place the DT122 (2) on the bracket rail•
with the interface ports side facing
downwards so that the two mounng
holes on the appliance are aligned
with the exisng holes on the rail (see
picture).
Step3:
Apply and ghten the screws into•
their original locaons and make
sure that the bracket and the DT122
are properly secured.