DT Research DT135BT User manual

DT135BT
ENGLISH
Embedded Controller/
System
BASIC OPERATION GUIDE
DT135BT
Introducon
Thank you for acquiring the latest addition to DT Research’s line of Embedded Controllers/
Systems - the DT135BT, featuring compact, robust construction powered by the high-performance
and energy efficient Intel® Celeron® quad core processor. The DT135BT supports major embedded
operating systems as well as Microsoft® Windows® operating systems and provides complete
solutions for a variety of computing needs. The user is offered a choice of software solutions on a
platform characterized by the following:
High-integraon and energy-efficient processor technology•
Expanded graphics capabilies for mulmedia applicaons•
Robust construcon for reliable operaon•
Cost-effecve compung in compact and versale packaging•
ENGLISH 4
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131
Copyright © 2016, DT Research, Inc. All Rights Reserved.
BOG 020216 DT135BT ENG
Package Contents
1. DT135BT
2. AC/DC Power Adapter
3. Basic Operaon Guide
NOTE: The actual package contents may vary depending on the configuraon acquired.
Opons
The DT135BT is designed to work with a range of custom and off-the-shelf opons to enhance its
applicability for various deployments.
Built-in wireless LAN, with external antenna•
21

DT135BT
ENGLISH 23ENGLISH
Front View
Audio jack HDMI (A2) 3840 x 2160 @ 24Hz
1920 x 1080 @ 60Hz
Power buon Ethernet port
DC-in USB 3.0 port
HDMI (A1) 3840 x 2160 @ 24Hz
1920 x 1080 @ 60Hz USB 2.0 port
Precauons
Always exercise care when operang and handling the DT135BT.•
Never disassemble any poron of the enclosure as this will void any product warranty on the•
DT135BT.
Do not use any AC/DC adapter other than the one provided with the DT135BT or acquired from•
the manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power•
down the DT135BT and disconnect all power sources.
Please report the problem to your device provider immediately.•
The DT135BT
Powering ON and OFF
The Power Buon is located in the front of the DT135BT. The Power Buon may be configured to
funcon differently depending on the power opons of the operang system. In general, to turn the
DT135BT on, push and release the Power Buon on the front bezel. The power LED will be lit (blue)
and the corresponding interface will be displayed on the display monitor.
To turn offthe device, again depending on soware operang system, push and release the Power
Buon or use a soware shutdown interface. In the event of system lockup, the Power Buon may
be used to perform a reset on the device. To do that, push and hold the Power Buon for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Buon
again will restart the device.
Device Ports
The DT135BT features an opmal set of I/O ports while preserving the compact size of the system.
The HDMI connectors, network (10/100/1000 BaseT Ethernet), and power ports are supplemented
by a set of USB (2) and audio (1) ports. Through its USB ports, the DT135BT supports a wide range
of USB-based peripherals, applicable in providing the means for soware installaon, applicaon
storage, data storage, and system soware recovery and updates.
Memory and Storage
The DT135BT may be available in storage configuraons ranging from 32GB to 512GB Flash.
Depending on base soware configuraon, the user may use the internal memory of the DT135BT
for user’s installed soware and storage. The user may also supplement storage space with USB-
based peripherals such as flash disks. RAM capacity is from 4GB to 8GB.
DC EFHG
AB
Rear View
A
B
C
D
E
F
G
H