DT Research DT136 Assembly instructions

DT136
ENGLISH
BASIC OPERATION GUIDE
DT136
Embedded Controller/
System
Note: The actual package contents may vary depending on the configuraon acquired.
ENGLISH 4
signage dtri com
DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2012, DT Research, Inc. All Rights Reserved. DT Research is a registered trademark of DT Research, Inc.
INTRODUCTION
Thank you for acquiring the latest addion to DT Research’s line of Embedded Controller/ System
devices - the DT136, featuring compact, robust construcon powered by the high-performance
and energy efficient Intel® Core™ i-Series processor. The DT136 supports major embedded
operang systems as well as Microso® Windows® Embedded Standard 7 or Windows® 7 Pro
and provides complete soluons for a variety of compung needs. The user is offered a choice of
soware soluons on a plaorm characterized by the following:
High-integraon and energy-efficient processor technology•
Expanded graphics capabilies for mulmedia applicaons•
Robust construcon for reliable operaon•
Cost-effecve compung in compact and versale packaging•
Package Contents
DT136
AC/DC Power Adapter
Basic Operaon Guide
2
2
3
1
1
Opons
The DT136 is designed to work with a range of custom and off-the-shelf opons to enhance its ap-
plicability for various deployments.
Built-in wireless LAN, with external antenna•
BOG013013DT136ENG
SPECIFICATIONS*
System
Processor Intel® Core™ i-Series CPU
Chipset Intel® HM76
Memory (RAM) 4GB to 8GB
Storage 32GB, 64GB or 128GB
Operang Systems Microso® Windows® Embedded Standard 7 or Windows® 7 Pro
Display Resoluon Up to 1920 x 1080
Trusted Plaorm Module TPM 1.2
Network Interface 10/100/1000MB BaseT LAN x 2; Wi-Fi 802.11 a/b/g/n (oponal)
Expansion PCI Express
Input/Output Ports
1 DisplayPort++, 1 DVI port; 2 Audio jacks (Microphone-in, Line-out
jacks); 4 USB 2.0 ports; 2 Serial/ COM ports; 2 DC-in (include Phoenix
connector for 12-24V DC in); 2 RJ45 connectors for Ethernet;
Wi-Fi dipole antenna (oponal)
Power
AC/DC Adapter Input: 100 – 240V AC; Output: 18.5V DC/ Phoenix: 12-24V DC, 3.5A
Mechanical
Enclosure Aluminum + steel
Dimensions (H x W x D) 2 x 8.3 x 7.87 in/ 50 x 210 x 200 mm
Weight 5.51 lbs/ 2500 g
Environmental
Regulatory FCC Class B, CE, C-Tick, UL, RoHS compliant
Temperature Operaon: 0°C - 40°C; Storage: -20°C - 60°C
Humidity 0% - 90% non-condensing
* Specificaons subject to change without noce.

DT136
ENGLISH 23ENGLISH
The DT136
Powering ON and OFF
The Power Buon is located in the front of the DT136. The Power Buon may be configured to
funcon differently depending on the power opons of the operang system. In general, to turn the
DT136 on, push and release the Power Buon on the front bezel. The power LED will be lit (blue)
and the corresponding interface will be displayed on the display monitor.
To turn offthe device, again depending on soware operang system, push and release the Power
Buon or use a soware shutdown interface. In the event of system lockup, the Power Buon may
be used to perform a reset on the device. To do that, push and hold the Power Buon for at least 4
seconds. The system will shut down and all unsaved work may be lost. Pushing on the Power Buon
again will restart the device.
Device Ports
The DT136 features an opmal set of I/O ports while preserving the compact size of the system.
The video-out connectors, network (10/100/1000 BaseT Ethernet), COM ports, and power ports
are supplemented by a set of four USB 2.0 and two audio ports. Through its USB ports, the DT136
supports a wide range of USB-based peripherals. These peripherals are applicable in providing the
means for soware installaon, applicaon storage, data storage, and system soware recovery
and updates.
Memory and Storage
The DT136 may be available in storage configuraons ranging from 32GB, 64GB or 128GB Flash.
Depending on base soware configuraon, the user may use the internal memory of the DT136 for
user’s installed soware and storage. The user may also supplement storage space with USB-based
peripherals such as flash disks. RAM capacity is from 4GB to 8GB.
Precauons
Always exercise care when operang and handling the DT136.•
Never disassemble any poron of the enclosure. It will void any product warranty on the DT136.•
Do not use any AC/DC adapter other than the one provided with the device or acquired from the•
manufacturer or its partners.
In the unlikely event that smoke, abnormal noise, or strange odor is present, immediately power•
down the DT136 and disconnect all power sources.
Please report the problem to your device provider immediately.•
Rear ViewFront View
BA CDFE GH
RS232 COM ports
USB 2.0 ports
Audio jacks
Power buon
E
F
G
H
AC
B D
DisplayPort++
DVI port
Ethernet ports
DC-in