DT Research, Inc.
2000 Concourse Drive, San Jose, CA 95131 hp://www.dtresearch.com
Copyright © 2014, DT Research, Inc. All Rights Reserved.
DT Research and WebDT are registered trademarks or trademarks of DT Research, Inc. BOG070814DT307SC/ DT307SC-MDENG
INTRODUCTION
Thank you for acquiring the DT307SC/ DT307SC-MD Mobile Tablet. The DT307SC/
DT307SC-MD offers a 7”capacive touch display in a compact, rugged, and lightweight
package. The DT307SC/ DT307SC-MD enables efficient point-of-service/sales applicaons,
inventory management, and field services.
The DT307SC/ DT307SC-MD provides the precise features needed to streamline
operaons and improve producvity, data accuracy, and service.
PACKAGE CONTENTS
One DT307SC/ DT307SC-MD•
One baery pack and Handstrap•
Capacive Touch Stylus and Lanyard•
AC-DC power adapter•
Basic Operaon Guide•
*The actual package contents may vary depending on the configuraon acquired.
PRECAUTIONS
Always exercise care when operang and handling the DT307SC/ DT307SC-MD.•
Do not disassemble any poron of the DT307SC/ DT307SC-MD, as this will void any •
product warranty.
Do not use any power adapter or charging cradle other than the one provided with•
the tablet or acquired from the manufacturer or its partners.
In the unlikely event that abnormal noise, strange odor, or smoke is present, imme-•
diately power down the DT307SC/ DT307SC-MD and disconnect all power sources.
Please report the problem to your device provider immediately.
MODIFY THE READING RESULT FOR SCANNER/ RFID/ MSR
Adjust the data capture module reading result:
Launch1. Keyboard Wedge menu from taskbar
Go to2. Configuraon
CAMERA UTILITY
Capture Picture/Video:
Launch the1. Camera Ulity from Start > Camera
Select the picture mode by pressing2. Screenshot or Video buon
For other advanced sengs, please select the3. sengs to modify from Browser/
Resoluon/Flashlight or other Properes for the file captured
ADVANCED SETTINGs - MSR
Enable/disable MSR module, and setup the Parse Data Format for MSR:
Launch1. Keyboard Wedge menu from taskbar
Go to2. Configure MSR
Select3. Enable to setup the configuraon
NOTE: Unless you are sure you need to enable parse, we recommend you do not
use this seng.
