DT Research WebDT 550 Assembly instructions

www.dtresearch.com
INTRODUCTION
Thank you for acquiring the
DT Research WebDT 550/570, a
15-inch (WebDT 550) or 17-inch
(WebDT 570) TFT display-inte-
grated, thin computing platform,
oering adaptability to mounting
configurations and many applica-
tions, including information appliance,
thin client for server computing, and
disk drive-equipped options.
Please take a few moments to review the contents of
this document to ensure that the setup and startup
proceed smoothly. The WebDT 550/570 is ready for
use, out of the box, in its default configuration when
powered by the power source provided. The following
discussion oers guidance on the hardware elements
and features of the WebDT 550/570. Please refer to
your device provider for information pertaining to the
software operating system or software applications.
Package Contents
4WebDT 550/570 Display with Detachable Base
4AC/DC Power Adapter with Power Cord
4Basic Operation Guide
Precautions
4Always exercise care when operating and
handling the WebDT 550/570.
4Never disassemble any portion of the enclosure,
as this will void any product warranty on the
WebDT 550/570.
4Do not use any AC/DC adapter other than the one
provided with the device or a replacement acquired
from the manufacturer.
4In the unlikely event that smoke, abnormal noise,
or strange odor is present, immediately power
down the WebDT 550/570 and disconnect all
power sources. Please report the problem to your
device provider immediately.
BASIC OPERATION GUIDE
1
WebDT 550/570
Display-Integrated Digital Terminal
for Vertical Computing

WebDT 550/570 Basic Operation Guide
Lower I/O Panel
The WebDT 550/570 has a comprehensive set of I/O
ports. The following ports are located along the lower
rear edge of the display unit.
1. Ethernet 5. Parallel Port
2. DC Power In (18.5V) 6. Serial Ports, 2 standard
3. PS/2 Keyboard 7. Serial Ports, 2 optional
4. PS/2 Mouse
Packaging
4The WebDT 550/570 is delivered pre-assembled with a detachable base
for quick setup and an optimal out-of-box experience.
4The WebDT 550/570 is packaged with recyclable materials and
designed for maximum protection in transportation and handling.
4When possible, please save the packaging carton and protective inserts
for re-use if there is ever a need to ship the WebDT 550/570.
THE WebDT 550/570
The WebDT 550/570 is designed to meet the needs of
a wide range of deployments requiring ecient and
manageable, local and networked, computing. Built
on a high-integration, fanless platform, the WebDT
550/570 supports embedded as well as full Windows
applications. The durable, bright display highlights
a package that features low power operation, and
optional touch-screen and wireless computing.
Side I/O Panel
The WebDT 550/570 has four (4) USB 2.0-compliant
ports together with Line-In and Audio-Out ports
located and easily accessible along the left edge of
the display unit.
1 2 3 4 5 6 7
2

www.dtresearch.com
Rear Mounting
The WebDT 550/570 is designed to be secured to VESA-
compliant mounting arms or stands. This is accom-
plished by detaching the standard metal base from the
rear of the display unit. The VESA-compliant mounting
holes at the rear of the device will mate with VESA arms
to meet the requirements of the deployment.
Front Panel Function Buttons
The front panel of the WebDT 550/570 features
control buttons and speaker openings.
Button Description
*This button is programmable via software in the
applicable operating systems.
MENU Pressing this button will perform one of the following:
4invoke the MENU for display or device related
features that are adjustable;
4engage a highlighted MENU or Sub-MENU item;
4enter or exit Adjustment mode for MENU or
Sub-MENU item
Power 4May be configured to perform dierent functions,
depending on the software operating system.
4Depending on the OS, a brief, firm push will
trigger software-enabled entry into Shutdown or
Standby modes. Push in similar manner to Restart
or to exit Standby mode.
4Push and hold for over 4 seconds to forcefully
shut down the device. This method of powering
o should only be used when proper shutdown
through software is not possible.
4The POWER button is green when the device is
active (i.e.: device is not in Standby or Shutdown
mode, but display may be dark.)
–Pressing this button outside of the MENU function
will allow the user to ADJUST the Volume. Press
MENU to exit. Pressing this button within the MENU
function will:
4adjust a selected parameter;
4navigate among MENU or Sub-MENU items
+Pressing this button outside of the MENU function
will allow the user to ADJUST the Volume. Press
MENU to exit. Pressing this button within the MENU
function will:
4adjust a selected parameter;
4navigate among MENU or Sub-MENU items
*
Menu Power
Built-in
Speakers
+–
1. Remove the detachable
base by pressing upward
to remove the cover, then
unscrewing the four screws
attaching the base to the
display.
2. The display without the
base.
3. Attach the new VESA-compli-
ant mounting arm or stand to
the display using the same
screws removed in step 1.
4. The display successfully
mounted on a VESA-
compliant mounting arm.
3

WebDT 550/570 Basic Operation Guide
DT Research, Inc.
2000 Concourse Drive
San Jose, CA 95131 USA
tel [phone]
fax [phone]
OPTIONS
The WebDT 550/570 has a number of optional configurations in both software and hardware. These include:
1 Support for embedded and full Windows operating
systems with requisite variances in flash memory
and hard-disk support while retaining its fan-less
properties;
2 Precise, 5-wire resistive, touch-screen display;
3 Detachable custom keyboard tray with matching
USB keyboard;
4 Custom-fitted, USB, Magnetic Stripe Reader (MSR)
with matching security bracket;
5 Internal, 802.11b/g wireless LAN (WLAN) support;
6 Option of two additional serial ports
Display 15” (WebDT 550) or
17” (WebDT 570) TFT LCD;
50,000 hours lamp life
Display Resolution WebDT 550: 1024 x 768 (XGA)
WebDT 570: 1280 x 1024 (SXGA)
Processor VIA Eden™1 GHz
Memory (flash) 64MB – 4GB
Memory (RAM) 128MB – 1GB
Operating Systems Windows CE;
Windows XP Embedded;
Windows XP Professional;
Linux Thin Client Terminal
Storage Internal flash module;
Internal HDD;
External USB
Display Enclosure ABS plastic
Base or Pedestal Detachable aluminum construction;
VESA-compliant mounting
Control Buttons Five (5) front buttons
– Power (1)
– OSD Controls (3)
– Programmable (1)
Input/Output Ports 18.5V DC-in jack;
Microphone-In; Audio-out jack;
USB 2.0 ports (4);
PS/2 (keyboard and mouse);
Parallel (1); Serial (2);
10/100 BaseT Ethernet
Network Interface Mini-PCI; RJ45 Ethernet; USB
AC/DC adapter Input: 90-240VAC
Output: 18.5VDC, 3.5A
Power Cords North America, EU, UK
Base Weight WebDT 550: 10.8 lbs (4.9 kg)
WebDT 570: 13.4 lbs (6.2 kg)
Regulatory FCC Class B, CE, UL
Operating Temperature 0° – 40°C
Humidity 0% – 90% non-condensing
SPECIFICATIONS
1 2
3 4
MDT550-14-03