Duplo DC-535 User manual

¡Store in a manner that permits use anytime.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
,
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
For the safe usage of the machine, correct operation and
periodic maintenance are essential. Read this manual
before using the machine.
WARNING
DC-535 Cutter
Ver.1

- 1 -
Introduction
Thank you for purchasing the DC-535 Cutter.
This product is the result of our many years of experience in the field of office
equipment.
Be sure to read this manual before using the machine.
In order to use the machine safely and efficiently, read this manual thoroughly, and make
sure that you understand all of the instructions that it gives, so that you operate the
machine correctly.
Take good care of this manual. Keep it in a safe place where it can be consulted at any
time.
Symbols and pictures
Safety instructions
In this manual and on the stickers affixed to the machine, a variety of symbols and
pictures are used. These symbols and pictures provide warnings and instructions to
prevent danger to you or other people and damage to office property. The meanings
Indicates potential danger of death or serious injury if it is ignored.
Indicates potential danger of injury or damage to property if it is ignored.
Warning :
Caution :
Examples of pictorial symbols
Other nomenclature
A triangle indicates danger. The precise nature of the danger is indicated by a
pictorial symbol inside the triangle. The symbol shown here indicates danger of
electric shock.
A circle with a line diagonally across it indicates prohibition. The particular act
prohibited is indicated by a picture inside the circle. The symbol shown here indicates
a prohibition of disassembly.
A black disc indicates an instruction, or sometimes prohibition. The content is
indicated by pictorial symbols drawn in white in the disc. The symbol shown here
indicates an instruction to pull the plug out of the outlet.
IMPORTANT :
NOTE :
Introduces instructions for correct operation and maintenance of the
machine. A failure to follow them may cause insufficient performance or
breakdown.
Introduces useful information for the operation and maintenance of the
machine as well as information on the performance, etc. of the product.
PLEASE NOTE
In the interest of upgrading our products, specifications and other data given in this
manual are subject to change without notice. If the manual contains anything that
you do not understand, contact the manufacturer for clarification.
2
u

- 2 -
TABLE OF CONTENTS
Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.Names and functions of each part. . . . . . . . . . . . . . . . . . 7
s
Feed side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
s
Ejection side. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.Names and function of the operation panel. . . . . . . . . . 9
s
Display unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
s
Operation unit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
3. Procedures for using the machine . . . . . . . . . . . . . . . . 10
4. Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
¡ About modes and mode displays . . . . . . . . . . . . . . . . . . . . . . . . . 15
1. Turning on the power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Selecting the cutting dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3. Performing test operation
to check the cutting dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4. Starting operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. Registering cutting dimensions . . . . . . . . . . . . . . . . . . 19
1. Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
2. Procedure for registering cutting dimensions . . . . . . . . . . . . . . . . . 19
6. Other functions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
¡Deleting registered data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
¡ To temporarily offset the cutting position . . . . . . . . . . . . . . . . . . . 21
7. Suggestions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
<<Message displayed on LCD when a jam occurs>> . . . . . . . . . . . . 22
<<Corrective action for paper jams>> . . . . . . . . . . . . . . . . . . . . . . . . 23
¡Removing jammed paper from the feed unit . . . . . . . . . . . . . . . . . 23
¡Removing jammed paper from the cutter
or ejection unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
8. Specifications and accessories . . . . . . . . . . . . . . . . . . 25
s
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
s
Accessories. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

- 3 -
Safety instructions
¡Be sure to follow these instructions. They are extremely important for safety.
WARNING
¡Do not modify the machine. Do not remove any of the covers from the machine.
¡Do not insert pins, wire or other foreign objects into the machine. Do not allow
any liquid to get into the machine through its openings or gaps in its structure.
Liquid inside the machine may result not only in breakdown, but also in electric
shock or fire.
¡Keep your hands off inside the margin trimmer. It contains cutting edges which
may hurt you.
¡Do not put your hands or fingers inside the front or rear safety cover during
operation, or they could be crushed or otherwise injured.
¡Use tweezers or a similar tool to remove jammed paper. Before removing
jammed paper, be sure to pull the power supply plug out from its outlet in order
to prevent electric shock.
To avoid electric shock:
To avoid injury to hands or fingers:
¡Do not use supply voltage other than the specified voltage.
Doing so may result in fire or electric shock.
¡Always pull the power supply plug out of its outlet before removing jammed
paper.
Do not insert or remove the plug with wet hands.

- 4 -
CAUTION
Installation location
General operation instructions
¡Install the machine in a level place.
¡Do not install the machine in a place subject
to direct sunlight or near heating equipment.
¡Do not install the machine in a place subject
to extreme temperatures (high or low), or in a
place subject to heavy vibration.
¡Avoid installing the machine in a place with
high humidity, or with large amount of oil,
iron filings, or dust.
¡Do not connect the cutter to a power outlet
that is also used for equipment that
generates noise, such as large-size office
equipment or refrigerators.
¡Do not use the cutter to cut paper that
exceeds the specification paper thickness.
Doing so could result in breakdown.
¡Do not attempt to cut paper with staples,
paper clips or any other pieces of metal
attached to it.
¡Use a dry cloth to remove paper cuttings
collected in the machine and to clean the
rubber rollers or other parts. Be sure to pull
the power supply plug out from its outlet
before cleaning.
Safety instructions

- 5 -
q
Safety instructions
DLocations of warning stickers
The locations of the machine's warning stickers are shown below. To ensure safe work, read the stickers and
heed their instructions. Keep the stickers clean at all times. If they become damaged or peel off, replace them
with new ones.

- 6 -
No. Part No. Name Q'ty
q
w
e
L8-T1080
L8-T1070
L8-T1100
Warning Sticker 1
Warning Sticker 2
Warning Sticker 3
2
1
1
w
e
Safety instructions

- 7 -
1. Names and functions of each part
s
Feed side
No. Name Function
qFront safety cover Open this cover to adjust the paper thickness or to remove jammed paper.
wOperation panel See "Names and functions of the operation panel" on p. 9.
ePaper tray Load the paper into these trays.
rAuxiliary paper tray
tPaper stopper Guides the trailing edge of the paper.
yGuide Hold the trailing edge of the paper.
uPower switch Press the [ ] side of the switch to turn the power on, and the [ ] side to
turn it off.
iInlet The power cord (an accessory) is inserted into this.
oPaper guides Set the position of these guides to match the width of the paper.
!0 Lock lever Pull this lever backward (toward you) to lock the paper guides.
qoe w
i
r
t
y
!0
u

- 8 -
1. Names and functions of each part
s
Ejection side
No. Name Function
!1 Rear safety cover Open this cover to adjust the margin slitters or to remove jammed paper.
!2 Ejection tray Receives ejected paper.
!3 Ejection stopper Stops the leading edge of ejected paper sheets.
!4 Ejection guides Laterally positions the ejected paper.
!5 Knob Moves the margin slitter. Turn clockwise to lock.
!6 Pointers Indicate the margin cutting position.
!7 Scale Measures the paper dimensions for cutting.
!8 Aligner Moves the left and right margin slitters simultaneously.
!9 Trash box Cut-off margins are deposited into this box.
!7
!2
!9
!4
!5
!6 !1
!8
!3

- 9 -
2. Names and function of the operation panel
No. Name Function
q
Liquid crystal Display Displays various messages.
wCOVER indicator Lights when a safety cover is open.
eJAM indicator Lights when a paper jam occurs.
rPAPER indicator Lights when there is no paper in the paper tray.
tREADY TO RUN
indicator In the RUN mode, lights to indicate the machine is ready to run.
yPOWER indicator Lights when the power is on.
No. Name Function
qF button Function button - used in conjunction with other buttons to execute functions
such as cutting dimension registration.
wMODE button Switches among the LCD's display modes.
eSET button In the RUN mode, pressing this button executes test cutting.
In the SET mode, pressing this button memorizes cutting dimensions.
r3button When the machine is stopped in the RUN mode, or due to a jam, pressing
the + button will move the paper forward, and pressing the - button will
move it backward.
t4button
yRESET button
A multifunction button that when pressed at the same time the STOP button
is pressed,the number of sheets fed and cut will be reset.
If pressed for three or more seconds in the Freesize Input Mode, the current
registered data will be erased.
uSTART button In the RUN mode, pressing this button starts cutting operation (except when
a paper jam has stopped operation).
iSTOP button Press this button to stop the machine. Also press this button to restart the
machine after it has been stopped by a paper jam (but note that you must
first eliminate the cause of the jam before the machine can be restarted).
Display unit qw t yer
tewq y u i
r
Operation unit