Dura-Max 68004 User manual

J
1
ROVE 62” INDUSTRIAL 3 DRAWER
METAL & WOOD WORKBENCH
8
U.S. Polymers Inc.
1057 S. Vail Ave.
Montebello, CA 90640
United States of America www.duramaxbp.com
Customer Service: 1-888-444-0104 Monday - Friday: 8:00 a.m. - 4:30 p.m. PST
www.duramaxbp.com
SKU#68004-1 1 RD-1.0 29-12-2021
157.5 cm
62 in
61 cm
24 in
94 cm
37 in
IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE
WARNING
Your safety and the safety of others is important to us.
Failure to follow these guidelines can result in property damage or personal injury.
• The product is for indoor use only (Not recommended for outdoor use).
• We strongly recommend that at least two or more adults move and assemble this unit.
• Please ensure that all steps are completed before fully tightening the bolts.
ASSEMBLY INSTRUCTIONS
Step 8
Step 9
CARE AND MAINTENANCE
LIMITED LIFETIME WARRANTY
1. Use a soft, clean cloth that will not scratch the surface while cleaning.
2. Using solvents of any kind on your product may damage the nish.
3. Do not use any harsh abrasives or chemicals to clean any metal surface as it may damage the protective coating.
This product is warranted to the original purchaser. If there is a failure in this unit due to defects in materials or workmanship, the
manufacturer will repair or replace this item at our discretion without charge. Warranty is void if product has been assembled
incorrectly, misused, abused by overloading, altered in any way or damaged due to accident. This warranty is not transferable
and does not cover chipping, aking, scratches, rust, dents, or other damages to the surfaces of this product. Responsibility of the
manufacturer is limited to repair or replacement of this product. The manufacturer is not responsible for consequential, incidental,
or other damages or losses resulting from product failure.
This warranty is in lieu of all other expressed warranties. Some states do not allow the exclusion or limitation of incidental or
consequential damages, therefore, the above limitation may not apply to you. This warranty gives you specic legal rights and you
may have other rights which vary from state-to-state.
N
ITEM #68004

3
2
B
G
G
E
A
F
PARTS PARTS LIST
D
J
I
C
H
A x 1
Top
B x 1
Left Back Leg
C x 1
Right Back Leg
D x 1
Right Front Leg
E x 1
Left Front Leg
F x 1
Upper Beam
G x 2
Leg Support
H x 2
Bottom Beam
I x 1
Tie Support
J x 1
Wire Deck
K x 16
M8 Hex Bolt
L x 16
Washer
M x 20
Self Tap Drilling
Screw
N x 3
Drawer Liner
Tools Required (Not Included)
Spanner 13Screw Driver Socket Wrench 13

5
4
ASSEMBLY INSTRUCTIONS ASSEMBLY INSTRUCTIONS
Step 1 Step 2
Step 3
Remove only left and right drawers to start the assembly process
To Remove the Drawer
• Open the drawer to its full extension.
• Locate the drawer slide lock on each side of the drawer box. Pull up the lock on the left side of the drawer box and push
down the lock on the right side of the drawer box at the same time and pull drawer straight out.
• Remove the drawer.
To Reinstall the Drawer
• Align the tracks on the drawer with sliders and push in the drawer (you may nd this step easier if done by two people).
• Check that it is properly aligned by opening and closing a few times.
Note: If the drawer fronts are uneven, repeat the entire process.
K x 8
L x 8
M x 8
C
A
E
M
B
D
K
L

7
ASSEMBLY INSTRUCTIONS
6
ASSEMBLY INSTRUCTIONS
Step 4 Step 6
Step 5 Step 7
M x 4
M
F
H
H
G
K
M
L
G
K
L
M
I
I
K x 4
L x 4
M x 4
K x 4
L x 4
M x 4