DXV AT200 User manual

AT200
USER MANUAL
D29020CS416-XXX - SEAT & BOWL COMBINATION-CWH
D23020CS11S-XXX - BOWL-CWH
D28000AS416-XXX - SEAT / BODY UNIT-CWH
Canvas White (415)
Thank you for purchasing this product.
After reading this manual, please keep it in a place where you can refer to it easily.
Be Sure To follow The SAfeTy preCAuTionS.
Failure to follow the safety precautions may result in serious accidents in some circumstances.
Each of these items are extremely important for safety, and should be strictly observed.
In the event that an accident occurs as a result of improper usage, DXV by American Standard
will assume no responsibility for damages.
©2014 AS America Inc.
engliSh

1
Contents
SATIS Features …………………………………………… 2
Functions……………………………………………………… 5
Safety Precautions ……………………………………… 7
DANGER ……………………………………………………………… 7
WARNING …………………………………………………………… 7
CAUTION …………………………………………………………… 10
Handling Precautions…………………………………… 13
Operation
○Preparation and Checks Before Use ………… 14
(1) Checking the Water Shuto Valve [1] …… 14
(2)
Connecting the Power Plug to the Outlet [2] …… 14
(3)
Checking the Rear Cleansing Feature [3] 15
(4) Adjusting the Spray Water Temperature 16
(5) Adjusting the Seat Temperature ……………… 16
(6) Adjusting the Clock …………………………………… 16
○General Operation ………………………………………… 17
(1) Auto Seat Open Function…………………………… 17
(2) Auto Deodorizing Function ……………………… 18
(3) Front and Rear Cleansing ………………………… 19
(4) Using the Dryer …………………………………………… 23
(5) Flushing the Toilet ……………………………………… 24
(6) Auto Close Function…………………………………… 25
Useful Functions
○Power Save Function ………………………………… 26
○Deodorizing Function ……………………………… 28
○Night Light Function…………………………………… 29
○Comfort Features ………………………………………… 30
Preventing Low-temperature Burns
[Seat Heater Auto OFF] …………………………………… 30
Lowering the Water Pressure ………………………… 31
Adjusting the Auto Flush Function………………… 32
Muting the Signal Reception Sound ……………… 32
Restoring the Default Settings ……………………… 33
Storing the Settings ………………………………………… 33
Other References ………………………………………… 34
Manual Toilet Flushing ………………………………… 37
Cleaning and Maintenance
○Cleaning and Maintenance ………………………… 38
○Cleaning the Toilet Seat and Lid ……………… 40
○Removing the Toilet Seat Lid for Cleaning 41
○Cleaning the Toilet Bowl (Ceramic Parts) 43
○Cleaning the Nozzle Guard ……………………… 44
○Cleaning the Nozzle …………………………………… 46
○Replacing the Nozzle Tip…………………………… 49
○Removing the Side Covers ………………………… 51
○Low Water Pressure …………………………………… 52
○Low Battery Indicator ………………………………… 53
○Periods of Non-use……………………………………… 54
○Preventing Freezing …………………………………… 55
○Connecting/Disconnecting the Water
Supply Hose ………………………………………………… 58
Troubleshooting…………………………………………… 60
After-sales Service ……………………………………… 66
Specifications ……………………………………………… 67
Optional Parts ……………………………………………… 68

2
Overview
aToilet seat lid
bSeat unit
cIndicator (refer to the details below)
dUpper body sensor
eFlush button
fPower plug
gWater shuto valve
hOpen/close handle
iWater supply hose
jSide cover
kSeat sensor
lToilet seat lid release lever
mNozzle guard
nWarm-air drying duct
oNozzle (for rear cleansing)
pBowl
qNozzle (for front cleansing)
rToilet seat
sToilet
Indicator
• Upper body sensor
Water Shutoff Valve
* Use the open/close handle shown
on the left to stop the supply of
water to the toilet. Always set the
handle to the open position when
using the toilet.
This product is designed so that people such as elderly persons, persons with limited mobility, or illness, and
children can use it without assistance.
To ensure proper usage of this product, please read this “User’s Manual” carefully before using it.
Filter
The filter is located on the left side of the seat
when viewed from the front.
* The filter removes debris
from the tap water.
* Close the water shuto
valve before removing the
filter. A small amount of
water may spill out when
removing the filter, so place
a piece of cloth or similar on
the floor. (Page 52)
k
l
m
n
o
p
q
r
s
a
b
c
d
e
f
g
hij
AT200 Features

3
Remote Control Unit
aTransmitter
b
Toilet seat OPEN/CLOSE button
cSTOP button
dRear cleansing button
eRear cleansing - mild button
fFront cleansing button
g
Water pressure adjustment button
hFlush buttons (Full/Partial)
iPower button
jMassage button
kDeodorizer button
lDryer button
mTransmitter
n
NOZZLE POSITION adjustment
button
1. Main Panel * Remote control backlight will be illuminated when in use.
AT200 Features
a
b
c
d
e
f
g
h
i
j
k
l
m
n
(1) Remove the remote control from the holder.
(2) Reverse the remote control.
[Reference]
●When operating the sub-operation panel,
make sure the transmitter is facing the
upper body sensor on the indicator .
* The operation may not be accepted due
to failure of signal transmission.
[Note]
● When the remote control is removed from
the holder, buttons on the operation panel
cannot be used, except the [STOP] button.
Be sure to use the remote control while
set in the holder.
●Do not operate the remote control with
wet hands.
* Failure to observe this may cause failure.

4
3.Secondary Panel LCD
When power is o
[Reference]
•When the power button on the remote
control is turned o, “OFF” is displayed on
the LCD.
k Auto flush
lAuto seat-open
mTime
n Water temperature indicator
oSeat temperature indicator
pDryer temperature indicator
Remote Control Unit
AT200 Features
k
l
o
m
2.Secondary Panel
aHr/Min buttons
bPower save button
c
Seat temperature button
dWater temperature button
e
Auto flush button
fNozzle cleaning button
gBattery LED
hNight light button
iAuto seat-open button
jDryer temperature button
h
i
a
b
c
d
e
f
g
j
n
p

5
Cleansing
Rear cleansing/rear cleansing - mild
Rear cleansing
Page 19
Provides rear cleansing with a strong spray.
Rear cleansing
- mild
Page 2 0
Provides rear cleansing with a gentle spray.
Oscillating
spray
Page 1 9 / 2 0
Moves the nozzle back and forth to wash a wide range.
Oscillating
spray - narrow
Page 1 9 / 2 0
Moves the nozzle back and forth over a short span for a more thorough cleansing.
Front cleansing
Front cleansing
Page 2 1
Provides front cleansing for women, through a separate nozzle.
Oscillating
spray
Page 2 1
Moves the nozzle back and forth to wash a wide range.
Oscillating
spray - super
Page 2 1
Washes an extended range.
Nozzle position adjustment
Page 22
Moves the nozzle to the desired position.
Water pressure
Page 1 9 – 2 1
Adjusts the water pressure as desired.
Massage
Page 22
Alternates the water pressure between two levels.
Comfort Functions
Seat heating
–
Heats the seat to the user-defined setting.
Temperature
control
Page 1 6
Adjusts the water and seat temperature.
Warm air dryer
Page 2 3
Dries the user after front and/or rear cleansing.
Deodorizer
Page 1 8
Eliminates toilet bowl odors.
Deodorizer -
turbo
Page 2 8
Provides a more powerful deodorizing function.
Remote control
–
Allows the user to operate the toilet from a comfortable position.
Seat sensor
Page 3 4
Detects the presence of a user and allows the cleansing function to operate.
Auto seat open
Page 1 7 / 2 5
Automatically opens and closes the seat/lid.
Auto flush
Page 2 4
Automatically flushes the toilet after the user walks away.
Functions

6
○ : Available – : Not available
Comfort Functions
Night light
Page 2 9
Makes the toilet easy to find at night.
Seat heater auto
OFF
Page 3 0
Turns the seat heater o when a user sits on the seat. Turns the seat heater on
again when the user stands up.
Clock
Page 1 6
Displays the current time on the main panel LCD.
Reset function
Page 33
Resets the settings to the factory defaults.
Cleaning Functions
Easy-clean seat
–
No gaps on the toilet seat joints allow for easy cleaning.
Hyper Clean
surface
–
Both the toilet bowl and the seat unit have antibacterial properties that allow for
easy cleaning.
Automatic bowl
rinse
–
The toilet bowl is fully rinsed during each flush cycle.
Self-cleaning
nozzle
Page 2 0
The nozzle tips are automatically washed before and after cleansing.
Removable toilet
seat lid
Page 4 1 / 4 2
The toilet seat lid can be removed for easy cleaning.
Removable
nozzle tips
Page 4 9 / 5 0
Both nozzle tips can be manually removed for either cleaning or replacement.
Removable
nozzle guard
Page 44 / 4 5
The guard that covers the nozzles can be removed for easy cleaning.
Power Saving Functions
Advanced power
save
Page 2 7
Power levels are increased to normal settings during regular usage and lowered
during periods of non-use.
One-touch power save
(8 hours)
Page 2 6
Power levels are reduced for an 8-hour period.
Power button
–
This product can be turned o during long periods of non-use.
ECO5
–
This product uses 1.3 gallons (5 liters) for a full flush and 0.92 gallons (3.5 liters)
for a partial flush.
Functions

77
When using electrical products, especially when children are present, basic safety
precautions should always be followed, including the following:
Please read the following Safety Precautions thoroughly before use.
Failure to heed these precautions may result in serious consequences under some circumstances.
Each of these items are extremely important for safety, and should be strictly observed.
This product should be used only as described in this manual.
Means “Be careful!” (This is used together with “WARNING” or “CAUTION” in order to draw users’
attention. Carefully read and strictly observe the description.)
DANGER
Indicates an imminently hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate
injury or in damage to product or other property.
DANGER
To reduce the risk of electrocution:
Improper use of the grounding plug can result in a risk of electric shock.
Do not place or store product where it can fall or be pulled into a tub or sink.
When installing either the toilet or the remote control, avoid splashing water
directly onto these items. In addition, this product should not be installed in a
humid atmosphere (e.g. inside a shower room).
Do not pour/drop into the water or detergent inside/outside the power plug of the
product or remote control.
Do not reach for a product that has fallen into water. Unplug immediately.
Do not use while bathing.
WARNING
To reduce the risk of burns, electrocution, fire, or injury to persons:
Use this product only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
Do not connect or disconnect the power plug with wet hands, as this may cause
electric shock.
Do not splash water or liquid cleaners directly onto the seat unit or power plug, as
this may cause electric shock or fire.
This product should only be connected to a 120 VAC, 60 Hz GFCI-protected outlet.
Do not connect too many power cords to a single electrical outlet, as this may result in fire.
Hold the power plug when connecting or disconnecting it.
* If the plug is connected or disconnected by holding the cord, the plug or cord may be damaged,
resulting in electric shock or fire.
Safety Precautions

88
WARNING
Disconnect the power plug periodically and clean it with a dry cloth, as dust
accumulated on the power plug may cause fire.
* Wait for about 10 seconds before inserting the power plug again.
Completely connect the power plug, as failure to do so may cause electric shock or fire.
Do not damage, bend excessively, twist, bind, or place heavy objects on the power cord.
* Doing so may result in electric shock or fire.
Do not use a loose outlet, as this may cause electric shock or fire.
Ensure the electrical outlet to which the power cord is connected is properly grounded, as
failure to do so may cause electric shock in the event of a seat unit failure or short circuit.
If water is leaking from the seat unit or the water supply system, disconnect the
power plug from the outlet and close the water shuto valve.
* Failure to do so may cause electric shock, fire, or floor flooding.
Never operate this product if it has a damaged cord or plug, if it is not working
properly, if it has been dropped or damaged, or dropped into water. Return the
product to a service center for examination and repair.
If the seat unit, power plug, or power cord are damaged or not working properly (through
abnormal noise, odor, smoke, high temperature, cracking, or water leakage), or if the
plug is loose in the outlet, disconnect the power plug from the outlet immediately, close
the water shuto valve, and contact our company for instructions on resolving any of the
above issues. Never use any defective devices, as this may result in electric shock or fire.
Low temperature burns
A low temperature burn may occur when the skin has been in contact for
some time, with an object at relatively low temperature (about 104°F [40°C]).
Susceptibility to burns also depends on an individual’s skin sensitivity and other factors.
In order to protect against the possibility of a low temperature burn, the toilet seat
temperature should be set to “Low” or “OFF”. Especially in case of the use for a
long period of time, set the seat temperature should be set to “OFF”.
* As low temperature burns can also occur when the user skin is contact with heated air, the dryer
temperature should also be set to “Low”.
These precautions should especially be observed when any of the following use the toilet:
- Children
- Elderly persons
- Persons with illnesses
- Persons with limited mobility
- Persons with sensitive skin
- Persons on medication that may cause drowsiness
- Persons who are under the influence of alcohol
- Persons who are suering from exhaustion
* If the toilet seat is used for a long period of time without setting the seat temperature to “OFF”, the
user may suer a low-temperature burn.
*
If the dryer is used for a long period of time on a setting higher than “Low”, the user may suer a low-tem-
perature burn. For this reason, our company recommends setting the dryer temperature to “Low” during use.
Safety Precautions

99
WARNING
Please observe the following precautions when inserting batteries for the remote control:
●Place the battery in the correct direction, aligning the positive and negative terminals as
indicated inside the battery compartment.
● If the toilet will not be used for a long period of time, remove the batteries from the remote control.
●Remove any dead batteries from the remote control, immediately.
●Dispose of all dead batteries according to local regulations.
●Keep batteries out of the reach of children.
* In the case of batteries being swallowed, seek medical attention, immediately.
●Do not use old and new batteries together in the remote control.
Do not do any of the following while handling batteries:
●Do not let the batteries have contact with metal items such as necklaces, hair pins, and
do not store such items with the battery.
●Do not mix old and new batteries, or dierent types of batteries.
●Do not heat or disassemble the battery, or place it in water or fire, as the battery may
leak and cause fire.
If there is any possibility of the water freezing, be sure to activate the antifreeze function.
* Damage due to freezing may cause fire or flooding.
Do not install this product in a humid area such as a bathroom, as this may cause
electric shock or fire.
Do NOT disassemble or modify this product.
* Disassembly may result in electric shock, fire, and/or injuries. In addition, disassembly will invalidate
the product’s warranty.
This product should only be connected to a potable water supply line.
Failure to do so will cause problems in the operation.
Do not use outdoors or operate where aerosol (spray) products are being
used or where oxygen is being administered.
Connect this product to a properly grounded outlet only. See Grounding
Instructions in page 12.
If connection is made to a potable water system, the system should be
protected against backflow.
Keep the cord away from heated surfaces.
(Example: Panel Heater)
Never use this product while sleeping or drowsy.
Never drop or insert any object into any opening or hose.
Never block the air openings of the product. If lint or hair, etc. is stuck
in the air opening, remove it immediately.
When this product is used by children, the elders or persons with limited mobility, our
company recommends close supervision to avoid improper operation of the product.
Safety Precautions

1010
CAUTION
For care of the plastic parts, our company recommends the use of a mild, liquid,
all-purpose cleaner.
Avoid using abrasive products (such as powdered cleansers) and chlorine-based
products (such as bleach), as these products can damage the anti-bacterial
properties of the plastic components.
Home
cleanser
Toilet
cleanser
Check that the clip ring is firmly attached to the water supply hose.
* If the clip ring is not firmly attached, the water supply hose may come o, resulting in water leakage.
When using the filter, please observe the following:
●Close the water shuto valve when removing the filter.
●When installing the filter, tighten it fully so there is no gap.
●Check that the O-ring is free from any debris before attaching the filter.
* Failure to follow these instructions may result in water leakage and flooding.
Do not bend or crush the water supply hose, as this may result in water leakage and
flooding.
Do not climb on top of the toilet seat lid or seat unit as these may break,
resulting in injury.
* If the toilet seat or body cover becomes damaged, contact our company for repair instructions.
Do not place your weight on or climb on the water shuto valve, as this may result in
water leakage and flooding.
Do not apply any impact to the clip ring or pull it when cleaning the toilet, as the clip
ring may break and the water supply hose may come o, resulting in flooding.
Safety Precautions

1111
CAUTION
Only connect the toilet to tap water.
* Otherwise, this may cause corrosion inside this product, resulting in electric shock, fire, or inflammation of skin.
This product should be supplied with a cold water line only, as supplying it with a
hot water line may damage its internal components.
If cracks appear anywhere on the toilet bowl, do not touch the cracked areas.
Contact our company for instructions on how to replace the bowl.
Do not lean back against the toilet seat lid, as this may damage or break the lid.
Do not expose the toilet to any force or impact, as this may cause product damage,
injuries, and water leakage.
Regularly check the area around pipes for water leakage.
If you are not going to be using this product for a long period of time, close the water shuto
valve and drain the water from the toilet. In addition, disconnect the power plug from the outlet.
(Page 55 for more information)
Disconnect the power plug from the outlet during cleaning.
* Failure to do so may cause electric shock.
(Ensure the power is turned on when using the nozzle cleaning function.)
If it is necessary to modify the electrical wiring or plumbing, our company
recommends that such work should be performed by a licensed contractor.
Take care that children, the elderly or persons with limited mobility do not fall when
using this product.
* They may be injured or damage the device.
When a small child is using the toilet, set the Auto Seat Open switch on the remote control to
the OFF position. On rare occasions, the seat sensor may not be able to detect the presence
of a small child. In such a case, the toilet lid may start to close when the toilet is in use.
Save These Safety Precautions
Safety Precautions

1212
GROUNDING INSTRUCTIONS
The product is for use on a 120 V circuit, and has a grounding plug that looks like
the plug illustrated in sketch A in Figure 1. A temporary adapter, which looks like the
adapter illustrated in sketches B and C, may be used to connect this plug to a 2-pole
receptacle as shown in sketch B if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet (Figure 1)
can be installed by a qualified electrician. The green colored rigid ear, lug, and the
like extending from the adapter must be connected to a permanent ground such as a
properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by the screw.
If it is necessary to use an extension cord, use only a three wire extension cord that
has a three-blade grounding plug, and a three-slot receptacle that will accept the
plug on the product. Replace or repair a damaged cord.
* If there is no electrical outlet in the bathroom, consult a licensed electrician for the installation of a
GFCIprotected outlet.
The product should be grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing an escape wire for the
electric current.
* This product is equipped with a cord having a grounding wire with a grounding plug.
* The plug must be plugged into an outlet that is properly installed and grounded.
DANGER
Improper use of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the
grounding wire to either flat blade terminal. The wire with insulation having an outer
surface that is green with or without yellow stripes is the grounding wire.
Check with a qualified electrician or serviceman if the grounding instructions are not
completely understood, or if in doubt as to whether the product is properly grounded.
Figure 1
Safety Precautions

1313
Do not expose the toilet to direct sunlight, as this may cause discoloration, or the
remote control or body sensor may malfunction.
Do not open or close the toilet seat or lid roughly, as this may result in damage
to either of these parts.
Do not splash water or cleanser onto the remote control, as this may cause it to fail.
Do not operate the remote control with wet hands, as this may cause damage.
Do not use toilet deodorizer on the plastic parts. If the plastic parts are splashed with the deodorizer, wipe it off immediately.
* Otherwise, gloss may be lost.
Do not block the warm air or heater outlets, as this may cause damage.
Do not place a heater near the seat unit, as this may cause discoloration of the
plastic or failure of the cleansing and drying functions.
Do not use any paper other than toilet paper. Be careful not to drop any foreign
substances in the bowl, as they may clog the drain pipe.
If the toilet becomes clogged, use a plunger to clear the blockage. Do not flush
the toilet until this has been cleared, as this may cause flooding.
Do not wipe the toilet’s body, seat, lid or other plastic parts with a dry cloth or toilet paper. Refer to page 38 for details of cleaning.
* The surface of plastic parts may become scratched and lose their gloss.
Handling Precautions

1414
Before using the seat unit for the first time, check the following items.
Checking the Water Shutoff Valve [1]
* If the water shuto valve is closed, turn the open/close handle
counterclockwise 90 degrees to fully open it.
Connecting the Power Plug to the Outlet [2]
•Firstconnectthepowerplugtotheoutlet
(120 VAC).
•ThencheckthatthepowerLEDislit.
* The power LED on the indicator lights (green).
If the power LED does not light, the main power may have been turned o. If
“OFF” is displayed on the LCD, press Power button on the remote control.
[Note]
● Please wait for about 10 seconds before connecting the power plug again.
止水栓開.eps
STEP
1
STEP
2
● Indicator
Upperbodysensor
[1]
[2] [3]
PreparationandChecksBeforeUse

1515
CheckingtheRearCleansingFeature[3]
•Covertheseatsensorwithapieceofpaperorcloth.
* If the paper or cloth is black, the occupied seat sensor may not function.
•PresstheCleansingbutton[A].
•Placeahandabovethenozzletiptoblockthesprayedwater.
* At this time, water comes out from a point near the nozzle tips
in preparation for operation.
• PresstheSTOPbutton[B]tostoptheshower.
•Removethepaperorcloth
covering the seat sensor.
* Check the other functions by referring to “General Operation” (from page 17 of this Manual).
* The toilet is equipped with a seat sensor, which detects when someone is sitting on the seat.
The functions for front and rear cleansing, as well as for drying, cannot be activated when there
is no one sitting on the seat.
WARNINGWARNING
Ensuretheelectricaloutlettowhichthepowercordisconnectedisproperlygrounded,asfailuretodosomay
cause electric shock or damage.
Thisproductshouldonlybeconnectedtoa120VAC,60HzGFCI-protectedoutlet.
Donotconnectadditionalpowercordstothetoilet’selectricaloutlet,asthismayresultinfire.
[A]
STEP
3
PreparationandChecksBeforeUse
[B]

1616
AdjustingtheSprayWater
Temperature
•PresstheWatertemp.button[C].
* The water temperature can be set to any of six levels - “OFF”
(water temperature), and ranging from “Low” (approximately
90°F (32°C)) to “High” (approximately 104°F (40°C)).
Adjusting the Seat
Temperature
•PresstheSeattemp.button[D].
* The seat temperature can be set to any of six levels - “OFF” (room
temperature), and ranging from “Low” (approximately 82°F
(28°C)) to “High” (approximately 98°F (36.5°C)).
Adjusting the Clock
•Pressthe“Hr.”or“Min.”button[E].
* To advance the time on the clock in one hour or one minute
increments, press and release the Hr. or Min. button, respectively.
* To advance it rapidly, press and hold the button for one second.
* The accuracy of the clock is within +/-1 minute per month at
room temperature (approximately 77°F (25°C)).
STEP
5
Our company recommends that you perform the following operations before using the seat unit for more comfort.
[Reference]
●This toilet is equipped with a “seat heater auto o” function that automatically turns o the seat
heater when it is occupied to prevent low-temperature burns.
(Page 30)
●The toilet seat is not warmed immediately. our company recommends that you set the temperature
10 to 15 minutes before use in order to use the toilet comfortably.
STEP
4
* Pressing the buttons alters the LCD display.
[C]
STEP
6
* Pressing the buttons alters the LCD display.
* Pressing the buttons alters the LCD display.
[D]
PreparationandChecksBeforeUse
[E]

1717
GeneralOperation
STEP
1
* “AUTO SEAT-OPEN” button appears
on the LCD.
* The function is set to “ON” in the
default settings.
AutoSeatOpenFunction
•PresstheAutoSeatOpenbutton[A]to
activate this feature.
* If the seat sensor is not activated after the seat lid opens independently, the seat lid automatically closes after
approximately one minute.
* The upper body sensor detects the motion of a person and automatically opens the toilet seat lid.
•Toopenthetoiletseatlidandtoiletseatsimultaneously
PresstheSTOPandOpen/Closebuttonssimultaneouslyfor2seconds.
* A short beep sounds when the setting is complete.
* The seat and seat lid close approximately 1 minute after the user leaves the toilet.
* Press the STOP and Open/Close buttons simultaneously for 2 seconds to reset.
A beep sounds when the setting is complete.
Tomanuallyopenandclosethetoiletseatlidorseat
PresstheAutoSeatOpenbuttontodeactivatethisfeature.
* The “AUTO SEAT-OPEN” display on the LCD disappears.
* When a small child uses the toilet, turn o the auto seat open function. The seat sensor may not be able
to detect a small child’s body, and, although rare, the toilet seat lid may start to close during use.
* The toilet lid will not open for 10 seconds after it is closed manually.
Toopenandclosethetoiletseatwiththeremotecontrol
1 PresstheOpen/Closebutton[B]to
openthetoiletseat.
2 PresstheOpen/Closebutton[B]again
to close the toilet seat.
[Note]
●Avoid direct sunlight, as this may cause the sensor to malfunction and the toilet seat lid to automatically open.
[A]
[B]

1818
AutoDeodorizingFunction
1 Deodorizingstartswhenthetoiletseatlidopens.
When the toilet seat opens, the deodorizer fan is activated in “full power mode”.
2 Thedeodorizeroperatesinnormaloperationwhile
the user is sitting on the seat.
The deodorizer fan changes to “power mode”.
3 Deodorizingstartswhentheuserstandsup.
The deodorizer fan increases output again to “full power mode”.
4 Deodorizingstops.
The deodorizer fan automatically stops one minute after the user stands up.
•Todisabletheautomaticdeodorizingfunction
PresstheWatertemp.[C]andNozzleCleaning[D]
buttonssimultaneouslyfor2seconds.
* A beep sounds when the setting is complete.
* Press the Water temp. and Nozzle Cleaning buttons simultaneously
for 2 seconds to activate the automatic deodorizer again.
(A short beep sounds when the setting is complete.)
STEP
2
[C] [D]
GeneralOperation

1919
Front and Rear Cleansing
For rear cleansing
•PresstheCleansingbutton[B].
* Water will drip from the nozzle. This washes the nozzle
before use. The nozzle extends and water sprays.
•PresstheSTOPbutton[A].
* The spray will stop and the nozzle will retract.
Toadjustthewaterpressure
Press or ontheSpray
Strengthbutton[C].
* The water pressure can be adjusted to any of six levels. Select the water pressure as desired.
Tochangethecleansingmode
PresstheCleansingbutton[B]asecondtimeduringrearcleansing.
* Pressing Cleansing during rear cleansing alters the mode.
* Once the cleansing is stopped, the cleansing mode starts with rear cleansing when Cleansing [B] is pressed.
[Note]
• When the water temperature is extremely low in winter
for instance, the water pressure may become weak.
•Sit further back on the toilet seat.
If you sit further back on the seat, there will be
less water splashing.
•The rear cleansing or rear cleansing - mild function
stops when the toilet is flushed. This function can-
not be started while flushing the toilet.
[Reference]
•The water pressure may be further lowered for
those who feel the water pressure is too strong
even at the lowest setting. (Page 31)
STEP
3
The nozzle moves back and
forth to wash a wide range.
The nozzle moves back and forth over a
short span for more thorough cleansing.
Rear cleansing Oscillatingspray Oscillatingspray-narrow
[C]
[A]
[B]
GeneralOperation