E-Z UP Hi-Viz HV910BOR User manual

Care and MaintenanCe
IMPORTANT! Read this information before proceeding.
It is the user’s responsibility to take the following
precautions at all times.
• Always stake or weigh down your shelter. Do not use in any
potentially windy or rainy weather.
Wind and rain can damage the E-Z UP®Instant Shelter® product
and may also result in injury to you or others. Therefore, do not
rely on shelter for protection in heavy or prolonged rain storms.
• The E-Z UP®Instant Shelter®product is designed as a temporary
shelter. Do not leave up for extended periods.
• Use caution when handling the E-Z UP®folding frame.
Avoid pinching hands or fingers as frame opens or closes.
• Do not use shelter in a lightning storm.
• Do not leave your E-Z UP®Instant Shelter®product unattended.
• Do not build fires within shelter enclosure.
For long lasting durability and the best possible protection
for your E-Z UP®Instant Shelter® products, follow these
E-Z care and maintenance instructions:
• Use a mild soap (not detergent) and plenty of water for top
cleaning.
• Let the E-Z UP®top and frame dry completely before closing
or storing to avoid mildew.
• Frame will operate and look better if occasionally wiped with
silicone spray, especially before and after use in damp conditions.
Remove excess silicone residue before applying top.
• Use a seam sealer if top leaks or drips water. Available at most
sporting goods and hardware stores.
• Slightly tighten bolts if frame becomes loose.
iMportant inforMation
WARNING: Keep all flame and heat sources away from all
shelter fabrics. These fabrics meet the flammability requirements
of CPAI-84. The fabric may burn if left in continuous contact with
any flame source. The application of any foreign substance to
the fabric may render the flame-resistant properties ineffective.
We Make Life E-Z!™
INTERNATIONAL E-Z UP, INC., manufacturer of
E-Z UP®Instant Shelter®
products, warrants to the
original purchaser who provides a dated sales
receipt, from an Authorized Dealer, each part of the
E-Z UP®Instant Shelter®product to be free from
defects in material or workmanship for a period
of ONE YEAR after the date of original purchase.
This warranty applies only for normal and expected
uses, as determined by the manufacturer.
INTERNATIONAL E-Z UP, INC.’s obligation and liability
under this warranty is limited to the repair or replace-
ment (at its option) of the product or its parts, after its
own review and examination.
RETURN ADVISORY - Before returning any part or prod-
uct to INTERNATIONAL E-Z UP, INC. or its designated
representative, please phone or write to obtain specific
return shipping instructions. All shipping costs must be
prepaid, and INTERNATIONAL E-Z UP, INC. is not
responsible for products damaged in transit.
CONDITIONS - This warranty shall be void as to any
product which has been altered or modified in any man-
ner. This warranty does not apply to damages caused by
wind, rain, or other forces of nature, not to accidental or
deliberate damage of the product, nor to use of the prod-
uct that does not conform with the product instructions.
This warranty is provided in lieu of all other warranties,
expressed or implied.
E-Z UP®
INSTANT SHELTER®
“Sets Up in Seconds!”™
10’ x 10’
(3.0 m x 3.0 m)
-
OWNER’S MANUAL
PRODUCT WARRANTY

Pull Pin
1.
With partner, lift up two
adjacent outer legs, release
the toggle lock and telescope
inner legs into outer legs. Lift
remaining outer legs, release
the toggle lock telescoping
inner legs into outer legs.
6.
Lift two adjacent
outer legs and slide out the
inner legs until the toggle
engages the inner leg.
Lift remaining outer legs
and pull out inner legs until
the toggle engages the inner
leg. Use spikes or weight
bags to secure in windy con-
ditions.
3. With partner on oppo-
site sides grasp the top of
the diamond shaped area
over trusses by “close“ stick-
er. Lift the shelter up slightly
and shake it while stepping
towards your partner until the
shelter is 3/4 closed. Grasp
adjacent outer legs and push
shelter together until it fully
closes. Be careful not to pinch
fingers. Store shelter in roller
bag.
5. Engage the Pull-Pin
Auto Slider®at each corner
by pushing up on slider with
one hand while pushing down
the top of the leg with the
other hand. The pull pin will
engage the hole. Repeat steps
on remaining legs.
1.
Place your E-Z UP®frame
in the center of area to be
shaded. With partner on oppo-
site side, grasp two outer legs,
slightly lift off ground and step
backwards, stopping at full
arms’ length.
*2. Gently unfold the fabric
top and place it over the open
frame.
*3.
Attach the top to the
E-Z UP®frame by pulling the
valance down matching the hook
and loop strips on the top with the
strips on the frame. Pull the cor-
ners down fully. Push the strips
firmly together at each corner.
4.
Grasp the bottom of
the diamond-shaped area of
trusses on opposite sides by
the “open” sticker. Slightly
lift up shelter and push hands
together while stepping back-
wards until shelter is fully
opened. Be careful not to
pinch fingers.
2.
Release pull pin slider
at each corner by first lift-
ing valance fabric away from
slider. With one hand, push
up on truss near slider to
remove the weight of the shel-
ter from the pull pin. Release
slide by disengaging pull
pin and push slider down.
*Note: Once top is permanently attached, only perform
steps 1 and 4 - 6 to set up.
• 1 10’ x 10’ (3.0 m x 3.0 m) Frame
• 1 Hi-Viz Top
*
• 4 Piece Standard Spike Kit
• 1 Roller Bag
*
*
Available in the Shelter Package only
Please read each step before you attempt to set up.
Save these instructions for future reference.
How toSet Up
*Note: First Time Attachment Is Required.
Top and frame are shipped unattached to avoid damage. The first time
you set up, the top must be attached to the frame with Hook and Loop
Strips. Once top is attached, set up and take down are easily accom-
plished within seconds.