Earthworks Audio SR5314 User manual

For more information, please visit
www.earthworksaudio.com or call 1-603-654-2433.
PREMIUM CAPSULE FOR WIRELESS MICROPHONES
SR5314

1 SR5314 Wireless Capsule
1 Fabric Bag
YOUR PURCHASE INCLUDES
Thank you for purchasing the
Earthworks SR5314 Capsule!
COMPATIBILITY The SR5314 is designed for full compatibility with Sennheiser wireless handheld transmitters in the
Digital 9000 and 6000 Series, 2000 Series, Evolution G4 500, 300 and 100 Series.
PROPER MAINTENANCE To guarantee your microphone provides years of performance, follow these guidelines:
• Avoid extreme heat, condensing humidity and dust
• Rough handling may damage the microphone capsule even if no visible marks are left.
• When not mounted to a wireless transmitter keep the SR5314 in its protective fabric bag.
CLEANING THE SR5314 All cleaning should be done with either alcohol wipes, or with a small amount of alcohol on a soft cloth.
Make sure any cleaned elements are completely dry before reassembling.
1. First unscrew the top half of the microphone (the basket).
2. Cleaning the External Stainless Screen - unscrew the external stainless screen.
3. Cleaning the Dual Stainless Pop Filter - both sides can be cleaned, but most of the dirt will be on the
side facing the external screen.
4. Internal Stainless Windscreen - it would be extremely rare if the internal windscreen should ever
need cleaning, but it may be cleaned if the need arises. As this windscreen is very close to the
microphone element, be extra careful that the windscreen is dry before reassembly.
EXPANDED VIEW OF
THE SR5314

SPECIFICATIONS
SR5314
Frequency Response 20Hz – 30kHz
Polar Pattern Cardioid
Sensitivity 6.5 mV/Pa (-43.7 dBV/Pa)
Power Requirements 5V to 12VDC using rings 3 & 6 on 6-ring
concentric connector
Peak Acoustic Input 133 dB SPL @ 6V (depending on
transmitter supply voltage)
Output Ring 1 & 2 on 6-ring concentric connector
Output Impedance 0.1Ω unbalanced (ring 1 & 2)
Noise 23dBA at capsule output (A-Weighted)
Threads M36-0.75 thread pitch to match
compatible
Sennheiser wireless handheld
transmitters.
Dimensions L x D Length 3.25 in (82.6mm)
Dia. max 1.6 in (40.6mm)
Dia. min 1.46 in (37mm)
Weight 0.4 lbs. (0.18 kg)
If you encounter issues while using your Earthworks Audio capsule, please make sure that:
• Your wireless transmitter system is connected to an active power supply.
• Your capsule is crewed tightly onto the microphone body.
• Your connection to the wireless transmitter system is active and strong.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
WARRANTY All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: [e-mail].
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
WE'RE HERE
TO HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at
[e-mail], or by phone at (603)-654-2433.
.37 Wilton Rd. Milford, NH 03055
[phone]
[e-mail]
earthworksaudio.com
© 2021 Earthworks, Inc