Earthworks Audio P30 User manual

For more information, please visit
www.earthworksaudio.com or call 1-603-654-2433.
GOOSENECK CARDIOID MICROPHONE
P30C

The small tip on many of our microphones allows them to capture the highest frequencies of
your sound. Please be gentle and considerate when handling the microphones with these tips.
(Microphones such as the SR314 and SR40V shield the tip within their capsule, and are thus
more durable.)
Please do not excessively bend the gooseneck beyond 90 degrees. Doing so on a consistent
basis will cause the wand portion to deteriorate and lose its ability to stay in the desired position.
1 P30/C Microphone
1 PW1 Foam Windscreen
1 Microphone Bag
YOUR PURCHASE INCLUDES
Thank you for purchasing the
Earthworks P30 Gooseneck Microphone!
Before setting up the microphone, pull back all existing settings and EQ. By doing this, you will have a
baseline understanding of how our microphones sound, and will then be able to adjust accordingly.
Begin by removing all included components from the packaging. Make sure to mute any incoming
signal to speakers or headphones to avoid any loud “pops” when connecting.
Connect the microphone to an audio interface supplying 24-48V phantom power using a standard
XLR cable. Please allow one minute for the microphone to settle. (Plugging in the microphone while
phantom power is turned on will not damage the microphone, and will actually settle the microphone
faster.)
To guarantee your microphone provides years of performance, follow these guidelines:
• Avoid touching the front protective screen.
• Never attempt to disassemble the microphone.
• Avoid extreme heat and condensing humidity. Allow the microphone to warm up when bringing it
in from the cold.
• Rough handling may damage the microphone even if no markings are visible.
• When not in use, keep the microphone in its bag.
GETTING STARTED
PROPER
MAINTENANCE
IMPORTANT
NOTICE

If you encounter issues while using your Earthworks Audio microphone, please make sure that:
• Your microphone is connected to an active power supply.
• Phantom power is being supplied to the microphone.
• Your microphone and XLR cable are well connected.
• The microphone is positioned at an appropriate distance from the sound source.
• External noise in your recording environment is kept to a minimum.
• Your recording space is at room temperature and free of dust.
If your issue persists after checking, please contact us via our website.
TROUBLESHOOTING
SPECIFICATIONS P30/C
Frequency Response 20Hz - 30kHz
Polar Pattern Cardioid (C30/C); Hypercardioid (C30/HC)
Sensitivity 20mV/Pa (-34dBV/Pa)
Power Requirements 24-48V Phantom, 10mA
Peak Acoustic Input 145dB SPL
Output XLR (Pin 2+)
Output Impedance 65Ω balanced between pins 2 & 3
Minimum Output Load 600Ω balanced between pins 2 & 3
Noise 20dB, A equivalent
Dimensions L x D 10 x .860 in. (250 x 22 mm)
Weight 225g (.5lb)
WARRANTY All Earthworks® products carry a limited warranty (parts and labor). Please register your warranty at:
earthworksaudio.com/register. If you have any problems with your Earthworks products, please contact our
warranty/repair department by email at: [e-mail].
NOTE: This warranty only applies to Earthworks microphones purchased brand new. For microphones purchased/
received second-hand, please contact us via our website.
WE'RE HERE TO
HELP
For anything else, we're a phone call or email away. Please feel free to contact us by email at sales@
earthworksaudio.com, or by phone at (603)-654-2433.
37 Wilton Rd. Milford, NH 03055
[phone]
[e-mail]
earthworksaudio.com
© 2020 Earthworks, Inc