East West Furniture VL-ET User manual

VALENCIA RECTANGULA
R NIGHT STAND
END TABLE
-
1
-
ASSEMBLY INSTRUCTIONS
SKU: VL-ET
Description : VALENCIA RECTANGULAR NIGHT STAND END TABLE
Product Di ension : 22”x15.7”x28”
Cube Size : 24”x17.7”x16.3”
NW: 33 LBS
GW: 37.4 LBS
175 Southbelt Industrial Dr,
Houston, TX 77047
Email:[e-mail]

VALENCIA RECTANGULA
R NIGHT STAND
END TABLE
-
2
-
Thank you for purchasing our product. This product has been designed for easy asse bly and long
lasting use. Please take the ti e to read and follow the asse bly instructions carefully.
Be sure to check all packing aterial carefully for s all parts that ay have co e loose inside the carton during ship ent.
Please separate, identify, and count all parts and etal hardware. Co pare with the part list to be sure all parts are present.
If the hardware is issing or you have difficulty asse bling this product, please call for us.
IMPORTANT NOTE:
-Place all wooden parts on a clean and s ooth surface such as a rug or carpet to avoid the parts fro being
scratched.
-Re ove all wrapping aterial, including staples & packing straps, before you start to asse ble.
-DO NOT tighten all screws and bolts until co pletely asse bled.
-Keep all hardware parts out of reach of children.
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please ake sure you
have the following parts:
NO Description Qt Sketch NO Description Qt Sketch
A Chest 1 B Legs 4
C Middle
Shelf 1
D Botto Fra e 1
BEFORE ASSEMBLY
PART LIST
ASSEMBLY TOOLS REQUIRED
NOT INCLUDED

VALENCIA RECTANGULA
R NIGHT STAND
END TABLE
-
3
-
When unpacking, please be careful not to discard any parts with the packaging. Before continuing, please
ake sure you have all of the following hardware:
NO Description Qt Sketch NO Description Qt Sketch
1 Bolt
(M6x30 ) 4
2 Bolt Screw
(M6x40 ) 4
3 Screw
(M4x35 ) 4
4 Screw
(M4x25 ) 1
5 Lock washer
(Ø6.5 x9 ) 4
6 Plat washer
(Ø6.5 x19 4
7 Allen key 1
Attach two Legs (B) to the Botto fra e (D) with Bolt screws (2) then Tighten with Allen key (7).
HARDWARE LIST
STEP 1

VALENCIA RECTANGULA
R NIGHT STAND
END TABLE
-
4
-
Attach shelf (C) to the legs (B) (on step 1) and attach both the other legs to the botto fra e (D)
with bolt screws (2) tighten with the Allen Key (7). Use the screw driver to tighten the screws (3) as
shown below.
Slowly pull out Drawers of Chest (A) out as shown below.
STEP 2
STEP 3
BC

VALENCIA RECTANGULA
R NIGHT STAND
END TABLE
-
5
-
Attach the botto of the chest (co pleted in step 2) to the Chest (Step 3) with bolts (1) and washers
(5), (6) . Tighten with Allen key (7). Use the screw driver to tighten the screws (4) as shown below.
STEP 4