Eaton CF2000 User manual

AddressableTwo Loop Fire Panel
Installation and Operation Manual

2INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Contents
Contents
INTRODUCTION TO THE MANUAL................................5
SYSTEM INSTALLATION AND DESIGN ............................6
Introduction ....................................................6
Cable & wiring ..................................................6
Project Planning .................................................7
System Design Guidelines .........................................8
Guidelines .....................................................8
Loop lengths ...................................................8
Loop loading - total number of addresses .............................8
COMPATIBLE EQUIPMENT ......................................9
SYSTEM OVERVIEW ..........................................22
Simple user interface ............................................22
User configuration and maintenance facilities .........................22
Spur tolerant soft addressing ......................................22
Integral Power Supply and Battery..................................23
TECHNICAL SPECIFICATION....................................23
Optional Functions as per EN54 Parts 2 & 4 ..........................26
Panel Inputs ...................................................26
Panel Outputs .................................................27
Output to Fire Alarm Routing Equipment (Option 7.9 EN54 Part 2).........27
Output to Fire Alarm Protecting Equipment ..........................28
Output to Fault Warning Routing Equipment .........................28
Delays to outputs (Option 7.11 EN54 Part 2) ..........................28
Dependencies on more than one alarm signal
Type C (Option 7.12.3 of EN54 Part 2) ...............................29
Optional Functions as per EN54 Parts 2&4 ...........................29
INSTALLATION ...............................................30
Mains Supply ..................................................30
Cable Segregation ..............................................30
Panel Installation ...............................................30
Installation Guide ...............................................31

3INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Contents
Fixing Details ..................................................32
Mounting the Backbox ...........................................32
Installing Cabling ...............................................32
System Wiring .................................................33
COMMISSIONING THE PANEL ..................................34
Up/downloading using PC software.................................34
PC commissioning software ......................................34
Device input programming........................................35
Non-Latching ..................................................35
Day / Night ....................................................35
Allocate Zones/Devices ..........................................35
Sounder Trigger ................................................36
Delay Configuration .............................................36
MCP Override .................................................36
Allocation List..................................................36
Dependency detection...........................................37
Panel Fault Finding..............................................38
PANEL CONTROLS AND INDICATORS............................39
Panel Overview ................................................39
LCD Display Overview ...........................................40
System Healthy ................................................40
View Event ....................................................41
Fire Event .....................................................42
View Fires ....................................................43
View Pre-Alarm ................................................44
View Fault ....................................................45
View Disabled Address ..........................................46
View Disabled Zone .............................................48
View Disabled I/O ..............................................49
View Log .....................................................50
Operational description of the event log .............................51
Operations (Soft Reset) ..........................................52
Operations (Evacuate) ...........................................53
Operations (Silence Alarms).......................................54

4INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Contents
Operations (Lamp Test) ..........................................55
Operations (Weekly Test) .........................................56
Access Level 2 .................................................57
Commissioning ................................................57
Panel Settings (Erase Log) ........................................58
Panel Settings (Reset Wait Mode) ..................................59
Panel Settings (Zone Re-sound Mode)...............................60
Panel Settings (Change Password) .................................61
Panel Settings (Reset Password) ...................................62
Panel Settings (Change Language) .................................63
Panel Settings (Date/Time)........................................64
Panel Settings (System Details) ....................................65
Panel Settings (Australian Mode) ...................................66
Testing (Test Device) ............................................67
Testing (Test Zone) ..............................................68
Testing (Test Sound Levels) .......................................69
Testing (One Man Walk Test) ......................................70
Testing (Global Flashing LED) screen................................71
Testing (Analogue Levels) ........................................72
Device Config (Add Device) .......................................73
Device Config (Delete Device) .....................................74
Device Config (Enable/Disable Address) .............................75
Device Config (Enable/Disable Zone)................................77
Device Config (Enable/Disable I/O) .................................78
Device Config (Check Autoconfig) ..................................79
Device Config (Change Device) ....................................80
Device Config (continued) ........................................81
APPENDIX ..................................................82
System Wiring .................................................82
Detector Base Wiring ............................................83
Addressable Call Point ...........................................84
Base sounder and sounder beacon base.............................85
Loop powered beacon ...........................................86
Internal Wall Sounder ............................................87

5INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Contents
IP66 Wall Sounder Wiring.........................................88
3 Way Input/Output unit..........................................89
1 Channel Mains Rated I/O Wiring..................................90
Zone Monitor Unit Wiring. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
Intrinsically Safe Zone Monitor Unit Wiring ...........................92
Shop Monitor Unit ..............................................93
Spur Isolator...................................................94
4 Way Sounder Controller ........................................95
Micro Zone Monitor Wiring .......................................96
Micro Input Module Wiring .......................................97
Battery Disposal Instructions ......................................97
NOTES .....................................................99
DOCUMENT UPDATE NOTES
S.No. Release / Change Notes Date
AFirst Release March 2019
BFirst Revision December 2019
Introduction to the Manual
This manual provides information on the installation, operation and maintenance of
the Eaton Fire Systems CF2000 Control Panel.
Notice
The operating system of the panel may be revised as a result of enhancements to
the system software or hardware. An updated issue of this manual is available on
request. The current issue of the manual can also be downloaded from the
Eaton website.
WARNING
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE DISPOSE
OF THE USED BATTERIES ACCORDING TO THE INSTRUCTIONS IN THE BATTERY
DISPOSAL INSTRUCTIONS.

6INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
System Installation and Design
System Installation and Design
Introduction
CF2000 provides all of the sophisticated features required of a leading edge analogue
addressable fire system along with the simple operation and neat installation
demanded by installers and building users.
The panel can be flush or surface mounted and the generously sized metal back box
allows ample facilities for rear or top cable entries. It is available as a two loop panel.
A comprehensive range of ancillary devices is available to operate with the
CF2000 panel, including Optical, photo-thermal and heat sensors, callpoints and a
comprehensive range of interfaces.
Each of the CF2000 system components has been specifically designed to operate as
part of a CF2000 system, this provides an assurance that the panel, the sensor, the
interfaces and the ancillaries are all fully compatible with each other and that the full
range of system functionality is supported by each device.
Each loop of the panel can accommodate up to 200 (99 Belgium) addresses.
Cable & wiring
Only the cable types listed below are allowable for loop connections.
• Enhanced Fire TUF
• Fire TUF™
• FP200
• MICC
When choosing your preferred cable type, you must take note of the following cable
and wiring requirements.
1. The cable must be 2 core screened with an over sheath
2. Maximum loop length with any of the above cables is 2KM
3. Maximum volt drop must be limited to 7 volts
4. The conductors should be 1mm2 CSA minimum to a maximum of 1.5mm2CSA
5. Multicore cable should not be used for Sensor wiring
6. Different loops should NEVER be run within the same cable
7. Loop feeds and returns should NEVER be used within the same cable
Cable resistance
Core CSA Typical FP200 resistance
1.0mm² 18.1 Ohms/km/Core
1.5mm² 12.1 Ohms/km/Core
2.5mm² 7.41 Ohms/km/Core
4.0mm² 4.61 Ohms/km/Core

7INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
System Installation and Design
Project Planning
The following is a typical program and timetable for an installation project, once the
initial order has been received:
1. Project Meeting
Installer and user to be present; system specifications, schematic diagram and
proposed circuit drawing to be available. CF2000 Installation & Commissioning Guide
to be provided.
2. Equipment Fix
Typically 2 week's notice is required for equipment to be delivered. Cable to be
installed and bases/back boxes to be fitted. Then fire sensors, call points, alarm
sounders and interface units can installed.
3. Address Schedule
Schedule of sensor locations to be completed by installer and returned to enable
System programming.
4. Auto Learn
Fire panel panels to be installed and terminated. System to be powered up by
installer and auto learn mode activated (see Auto Learn section). System to be tested
and verified by installer, prior to final commissioning.
5. Final Commissioning
Minimum 2 weeks notice is required from receipt of Address Schedule and
Commission request form for an Eaton Fire Systems Service Engineer to attend
site to implement/oversee the final commissioning procedures (see Commissioning
section), in conjunction with the installer.

8INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
System Installation and Design
System Design Guidelines
Guidelines
Fire detection and fire alarm systems for buildings should conform to the
relevant local standards and codes of practise. For the UK, these are BS 5839-1
(non-domestic premises) and BS 5839-6 (domestic premises). Both BS 5839-1 and
BS 5839-6 require the Control and Indication Equipment (CIE) to conform to
BS EN 54-2. The CF2000 fire control panel has been certified to BS EN 54-2.
Therefore, the panel is suitable to be installed in applications which have been
designed in accordance with the relevant BS 5839 codes of practise.
Installation planning is simplified by the fact that every addressable CF2000 device
contains an integral short circuit isolator. Care must be taken to ensure that local
standards requirements regarding aspects such as loop coverage, area covered by a
single spur and cable specification are observed.
There may be certain applications in which deviations from the code may be
necessary and these must be listed on the commissioning certificate (see
Commissioning the panel).
Loop lengths
The maximum permitted loop length is 2 km measured from the near to the far
terminals on the CF2000 Motherboard PCB. There is no minimum limit to loop
length. Any wiring spurs off the loop must be included within the 2 km limit. On long
loop runs, the lengths of wiring rises and falls (between floors, down to manual call
points) must be included. Remember to include these especially when taking loop
lengths from plan drawings.
Loop loading - total number of addresses
The total number of addresses per loop is 200 (99 Belgium). This includes detectors,
call points and all other addressable items and call points. When designing systems
its recommended that allowances are made for future expansion, Short circuit
isolators are incorporated into every CF2000 loop device, including Smoke detectors,
heat detectors, sounders, callpoints and interfaces. Therefore, no further fault
protection is required. In the event of a single fault, none of the devices connected
to the loop will fail to operate as the fault will be isolated by the
two adjacent devices.
Spur connected devices downstream of a cable fault will cease to function.

9INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Compatible Equipment
Dimensions (mm) Product Codes
Description Length Width Height Model Reference Order Code
Addressable Control Panels
Addressable 2 Loop Control Panel,
Standalone 170 320 400 CF2000 910187FULL-0198
Addressable Repeater Panels
Addressable Passive Repeater N/A
Addressable Detectors: Bases
Addressable Detector Base 104 104 22 CAB300 CAB300
Addressable Detectors: Point
Addressable Multi-Mode Heat Sensor 100 100 44 CAH330 400003FIRE-0003X
Addressable Optical Smoke Sensor 100 100 34 CAP320 400002FIRE-0002X
Addressable Photo-Thermal Sensor 100 100 44 CAPT340 400004FIRE-0004X
Addressable Detectors: Speciality
Addressable Reflective Beam Detector
50-100m 120 130 210 MAB100R MAB100R
Addressable Reflective Beam Detector
5-50m 120 130 210 MAB50R MAB50R
Addressable Call Points
Addressable Manual Call Point 53 87 87 CBG370S CBG370S
Addressable Manual Call Point
(Weatherproof) 53 87 87 CBG370WP CBG370WP
Addressable Alarms and Beacons
Addressable Remote Indicator 49 87 87 MRIAD MRIAD
Addressable Beacon 53 95 95 CAB382 CAB382
Addressable Ceiling VAD
(Red Plastic, Red Flash, Shallow Base) 37 93 93 CAB482CS 812037FULL-0214X
Addressable Wall VAD
(Red Plastic, Red Flash, Deep Base) 66 93 93 CAB482WD 812036FULL-0212X
Addressable Wall VAD
(Red Plastic, Red Flash, Shallow Base) 37 93 93 CAB482WS 812035FULL-0211X
Addressable Ceiling VAD (Red Plastic,
White Flash, Shallow Base) 37 93 93 CAB492CS 812050FULL-0269X
Addressable Wall VAD
(Red Plastic, White Flash, Deep Base) 66 93 93 CAB492WD 812034FULL-0210X
Addressable Wall VAD (Red Plastic,
White Flash, Shallow Base) 37 93 93 CAB492WS 812033FULL-0209X
Addressable Sounder Base 40 102 102 CAS380 CAS380

10 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Dimensions (mm) Product Codes
Description Length Width Height Model Reference Order Code
Addressable Sounder Base (Australian
Tone) 40 102 102 CAS380AU CAS380AU
Addressable Wall Sounder 96 105 105 CAS381 CAS381
Addressable Wall Sounder (Australian
Tone) 96 105 105 CAS381AU CAS381AU
Addressable Wall Sounder
(Weatherproof, Australian Tone) 103 109 108 CAS381AU-WP CAS381AU-WP
Addressable Wall Sounder
(Weatherproof) 103 109 108 CAS381WP CAS381WP
Addressable Wall Sounder Beacon 95 105 105 CASB383 CASB383
Addressable Wall Sounder Beacon
(Weatherproof) 105 108 108 CASB383-WP CASB383-WP
Addressable Wall Sounder VAD
(White Flash) 95 108 108 CASB393 CASB393
Addressable Wall Sounder VAD
(Open Class, Weatherproof) 105 110 110 CASB393WP CASB393WP
Addressable Wall Sounder VAD
(Red Plastic, Red Flash) 92 106 147 CASB483 8500111FULL-0197X
Addressable Wall Sounder VAD (Red
Plastic, White Flash, Weatherproof) 100 111 151 CASB483WP 8500115FULL-0201X
Addressable Wall Sounder VAD
(Red Plastic, White Flash) 92 106 147 CASB493 8500110FULL-0199X
Addressable Wall Sounder VAD (Red
Plastic, Red Flash, Weatherproof) 100 111 151 CASB493WP 8500114FULL-0200X
Addressable Sounder Beacon Base 44 115 115 CASBB384 CASBB384
Addressable Sounder Beacon Base
(Bell Tone) 44 115 115 CASBB384-B CASBB384-B
Addressable Sounder VAD Base
(Open Class) 44 115 115 CASBB394 666129FULL-0198X
Addressable Interfaces
Addressable 3 Channel I/O Unit
(Reset on Reset) 60 180 130 CIO351 CIO351
Addressable 3 Channel I/O Unit
(Reset on Silence) 60 180 130 CIO351S CIO351S
Addressable 3 Channel I/O Unit
(Triple Address) 60 180 130 CIO351SST CIO351SST
Addressable Micro Zone Monitor Unit 18.5 35 65 CIU872 CIU872
Addressable 230V Relay I/O Unit 60 180 130 CMIO353 CMIO353
Addressable 4-Way Sounder Controller 74 300 300 CSC354CPR CSC354CPR
Addressable Spur Isolator Unit 60 147 88 CSI350 CSI350
Addressable Zone Monitor Unit 60 147 88 CZMU352 CZMU352

11INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Dimensions (mm) Product Codes
Description Length Width Height Model Reference Order Code
Addressable Zone Monitor Unit
(Intrinsically Safe) 60 147 88 CZMU352-IS CZMU352-IS
Addressable Micro Single Channel
Input Unit 18.5 35 65 MCIM MCIM
Addressable Micro Single Channel
Output Unit 18.5 35 65 MCOM MCOM
Addressable Micro Single Channel
Output Unit (Reset on Reset) 18.5 35 65 MCOM-R MCOM-R
Addressable Micro Single Channel
Output Unit (Sounder) 18.5 35 65 MCOM-S MCOM-S
Addressable Shop Unit Monitor 57 147 88 MSU840 MSU840
Conventional Alarms and Beacons
Conventional Remote Indicator 30 87 87 CIR301 CIR301
Conventional Remote Indicator
(Weatherpoof) 30 87 87 CIR301WP CIR301WP
Installation Accessories
Safety Power Supply (24V/1.5A) 175 300 22 SPS-2423 SPS-2423
Safety Power Supply (24V/2.5A) 175 300 22 SPS-2433 SPS-2433
Safety Power Supply (24V/4.5A) 175 300 22 SPS-2453 SPS-2453

12 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
The range of compatible detectors for the CF2000 system consists of the following:
Model Optical Sensor Heat Sensor Opto-Heat
Sensor
Operating voltage 18 to 30V dc
Standby current (max) 220μA
Alarm current (max) 5mA
Ambient Temperature (max)
60ºC
A1R 50ºC
50ºCBS 65ºC
CS 80ºC
Ambient Temperature (min) -20ºC
Alarm temperature (static)
N/A
A1R 60ºC
60ºCBS 77ºC
CS 90ºC
Heat sensor class as defined by
EN54-5:2000
N/A A1R, BS, CS
control panel
selectable
A2S
Relative humidity (no n co nd) 0 to 95%
Height (w/o base) 34mm 43mm
Height (with base) 47mm 56mm
Diameter 100mm
Weight (w/o base) 86g 78g 76g
Material PC/ABS
Colour White
Optical Sensor
This is the most commonly used detector
and is most suitable for detecting slow
burning fires.
The status LED can be programmed to
either be permanently off under normal
conditions or to pulse in order to confirm
that it is in communication with the
control panel.

13INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Opto-Heat Sensor
This is the ideal sensor for a multi-use
environment as it has an excellent response to
smouldering and fast burning fires. Photo/thermal
sensors can be programmed for thermal only
operation at certain times of day.
The status LED can be programmed to either
be permanently off under normal conditions
or to pulse in order to confirm that it is in
communication with the CF2000 control panel.
Heat Sensor
Heat sensors are suitable for dusty environments
or environments where smoke is likely to be
present under normal operating conditions.
It can be programmed to operate in A1R,BS or
CS mode of operation depending on the required
application and sensitivity requirements.
The status LED can be programmed to either
be permanently off under normal conditions
or to pulse in order to confirm that it is in
communication with the control panel.
Analogue Sensor Base
Short Circuit Isolators
Each of the sensors in his range contain an
integral short circuit isolator, which operates
between the -VE COM IN terminal and the
-VE COM OUT terminal. The isolator operates
in conjunction with the Control Panel when a
low parallel resistance fault of typically 200Ω is
presented between the+VE and -VE of the
loop wiring.
Short Circuit Isolation Data (Integral with each sensor)
Total Loop Resistance for correct operation of short circuit isolator 50Ω (max)
Continuous Current allowable through isolator 700mA (max)
Isolator Resistance in closed state 0.13Ω (max)
Leakage Current into direct short circuit with isolator open 13mA (max)
Parallel Fault Resistance to be seen at the Control Panel for isolators to open 200Ω (typ)

14 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Compatible Callpoints
The range of purpose designed callpoints consists of a surface callpoint, a flush
callpoint and a surface weatherproof callpoint.
A range of accessories is available including a hinged protective cover, resettable
element kit and a flush bezel.
The status LED can be programmed to either be permanently off under normal
conditions or to pulse in order to confirm that it is in communication with the
control panel.
Compatible Sounders and Beacons
A wide range of loop powered sounders and beacons are available to operate with
the control panel consisting of a combined sounder base with a maximum output of
95 dB(A), a standalone sounder with a maximum output of 100 dB(A) that is available
in standard or weatherproof versions and a stand alone loop powered beacon.
For applications where a discreet dedicated sounder is required, a cover plate is
available for the white base mounted sounder enabling it to be used as a stand alone
wall or ceiling mounted sounder.
All of these devices are fully programmable via the sophisticated CF2000 multi stage
cause and effect programming facilities.
All sounders have multiple volume and tone settings which are controlled by the Site
Installer program. They will default to continuous - low volume.

15INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Base Sounder
The base sounder has been designed specifically to complement the latest
generation of Eaton soft addressed detectors.
It consists of a first fix bracket, and a main body which clips onto the bracket
incorporating the sounder and a detector mounting base in a single composite
assembly.
After the body has been clicked into place and connected, a sensor or front cover is
then added to complete a very simple quick and neat installation.
The cover enables the base sounder to be used as a discreet stand alone wall or
ceiling mounted device.
The sounder base design incorporates a mechanism that can be activated if required
to lock either the sensor or the cover into place to prevent unauthorised removal.
Base Sounder Beacon
The base sounder beacon has been designed
with the same fixing as the sounder base so
it can accommodate either a detector or front
cover being fitted.

16 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Loop Powered Beacon
A loop powered flashing beacon is available for
applications where visual alarm indication is
required such as areas of high ambient noise or
buildings which are used by people who are hard
of hearing.
Dedicated Stand Alone Sounders
Stand alone sounders are ideal for applications
where greater sound outputs are required than
can be achieved with a base sounder or for
applications requiring a higher level of resilience
or ingress protection.
Two different versions are available standard version and an IP66 rated version.
Visual Alarm Devices (VADs)
A range of loop powered VADs are available for applications where visual alarm
indications is required. These include areas of high ambient noise, or buildings which
are used by people who are hard of hearing. Each product in this range provides both
audible and visual indication of a fire alarm. The range consists of a VAD base and
two wall sounders. The base sounder VAD has been designed with the same fixing
as the base sounder so it can accommodate either a detector or front cover
being fitted.
CASBB394 with Sensor tted CASB393 CASB393WP

17INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Interfaces
The panel has been designed to be suitable for a wide range of applications, various
interfaces have been developed to enable the simple integration of other fire
systems or building control and safety systems. The following devices are available:
3 Channel I/O device
This interface has 3 input channels and 3 output channels. It is used to monitor up
to three separate inputs from equipment such as sprinkler flow switches and also
to provide 3 separately controlled volt free output contacts which are intended to be
used to control external equipment such as air
handling plant or access control systems.
All inputs and outputs operate completely
independently of each other and can be
programmed using the sophisticated cause and
effect capabilities to operate either globally or
in response to activation of specific devices or
specific inputs.
Inputs are monitored for open and short circuits.
A specific resistance is required to activate
an alarm condition, fully open or short circuit
conditions are monitored and generate a system
fault signal.
Inputs are suitable for use as fire signal inputs such as from a sprinkler flow
switch, however they can also be used to monitor non fire inputs such as external
keyswitches.
Outputs are rated to switch a maximum of 1A resistive at 30V DC.
It is supplied in a surface mounting IP65 box.
Single Channel I/O device with mains rated switching capability
This interface is a single channel input / output unit. The output is capable of
switching up to 8A at 230V AC. It is commonly
used for applications such as door release
controls and plant shut down signalling.
The input is monitored for open and short
circuits. A specific resistance is required to
activate an alarm condition, fully open or short
circuit conditions are monitored and generate a
system fault signal.
The input is suitable for use as a fire signal input
such as from a sprinkler flow switch. However it
can also be used to monitor non fire inputs such
as an external keyswitch.
It is supplied in a surface mounting IP65 box.

18 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Zone Monitor units
This interface is designed to enable
a zone of compatible conventional
detectors and callpoints to be
connected into the addressable loop,
it is compatible with up to 20 Eaton
conventional detectors connected via
the EFXN520 range of detector bases
and compatible detectors. Please refer
to local standards for details of the
maximum allowable area to be covered
by a single spur / zone. The interface
fixes to a standard, deep, double gang
back box and can be either surface
or semi recess mounted. When semi
recessed only the front section protrudes giving a maximum 29mm depth.
An additional intrinsically safe variant is available. The detection zone has been
programmed to accept a Zener barrier and a zone of intrinsically safe detectors.
End of line for this zone now becomes 6K8 and the diode in the detector base must
be removed.
Shop Unit Interface
This interface accepts a zone of conventional detectors plus an unlimited number of
callpoints which can be connected to the same input as the detectors or a separate
callpoint input if required. There is a facility to connect a local 24v power supply
which is monitored for fault.
In addition it has the facility to connect
two circuits of conventional polarised
sounders, which are monitored by
means of an end of line resistor and
powered in alarm conditions from the
external power supply.
The sounder circuits can be
programmed to operate in pulsed,
continuous or time delayed mode.
Please refer to local standards for
details of the maximum allowable area
to be covered by a single spur / zone.
ote:N The external supply must be connected even if the sounder
circuits are not used.

19INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Spur Isolator
CSI350 Enables soft addressing to
work when the loop contains spurs, it
controls the addressing operation so
that when the system reaches a spur,
all devices on the spur are allocated an
address before it continues addressing
the loop. It is mounted on a standard
deep double gang back box (supplied).
The device also incorporates a short
circuit isolator. Because each device
contains a short circuit isolator only 1 is
required at the start of each spur.
Please refer to local standards for
details of the maximum allowable area to be covered by a single spur / zone.
4 Way Sounder Circuit Controller
This interface provides power for 4
separately controllable conventional
sounder circuits, each circuit can be
separately programmed. It has been
designed to greatly simplify installation in
applications where specialist sounders or
beacons are required since it powers the
sounders and allows full control of the
sounder operation without having to wire
the sounder back to the control panel.
A 4 way unit takes up a single address
but each circuit can be
independently controlled.
It requires a local un-switched 230V
supply and incorporates a back up battery
to 24 hours of standby operation followed
by a minimum of 30 minutes of full
alarm ringing.
A standby of 72 hours can be achieved at
the expense of reduced load capability.

20 INSTALLATION AND OPERATION MANUAL 25-16330-B December 2019 www.eaton.com
Compatible Equipment
Micro Interfaces
A range of micro interfaces modules are also available:
The micro zone monitor is fully
compatible with the current range of
Eaton analogue fire detection panels.
It is suitable for interfacing a zone of up
to 20 conventional detectors connected
via the EFXN520 range of detector
bases and compatible detectors, onto
an Eaton analogue fire panel. It will
operate with any Eaton conventional
detector in configuration with a schottky
diode type base.
The micro input module accepts input
signals from external equipment such
as beam detectors, flow switches, valve
monitor switches etc. The control panel
can be programmed to perform different actions based on the state of the input.
The maximum number of input devices per loop is 200.