Eaton DF6100 User manual

DF6100, DF61002
Installation and Operation Manual
VdS
G211013
DoP0228
16
EN54-2:1997 + A1:2006
EN54-4:1997 + A1:2002 + A2:2006
General
Fault
FIRE
General
Disable
Power
ON
TEST
Sounder
Disable
Fault
System
Fault
Power
Fault
0786

2INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
Contents
SECTION 1: SYSTEM INSTALLATION AND DESIGN..................8
Introduction........................................................8
Project planning ....................................................8
System design guidelines .............................................9
Compatible equipment:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Equipment compatibility .............................................11
System overview ..................................................13
Technical specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Optional functions as per EN54 P2&4 ..................................17
Installation........................................................19
External connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Networking .......................................................22
Input/outputs......................................................23
Maintainance......................................................25
SECTION 2: COMMISSIONING..................................26
Commissioning mode...............................................26
Configuration......................................................26
Panel fault finding ..................................................28
PC comissioning software ...........................................29
Device input programming ...........................................29
Device outputs ....................................................30
Panel outputs .....................................................31
SECTION 3: PANEL CONTROLS & INDICATORS....................32
Touch screen display................................................33
Panel operation ....................................................34
Public access level 1................................................35
Evacuate (access level 2) ............................................36
Silence alarms.....................................................37
Mute buzzer ......................................................38
Reset............................................................38
Pre-Alarms .......................................................39
Disabled devices ...................................................39
Faults ...........................................................40

3INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
Enable/disable (others menu) .........................................40
Enable/disable .....................................................41
Lamp test ........................................................43
Weekly test.......................................................44
Installation instructions for: Single channel input unit MCIM-C ...............45
Viewing events ....................................................47
Check auto config ..................................................48
Replace device ....................................................49
Test device (access level 3) ..........................................50
Test zone.........................................................51
Sounder level test mode.............................................52
Global flashing LED on/off ...........................................53
One man walk test .................................................54
Commission: Load CDR from laptop ...................................55
Commission: Download CDR to laptop .................................56
Commission: Auto learn .............................................57
Erase log .........................................................58
System details ....................................................59
Load logo from PC .................................................60
Analogue level.....................................................61
Change panel number...............................................62
Number of panels in network .........................................63
Screen cover ......................................................64
Italian mode ......................................................65
Programming I/O and sounders T1 .....................................66
Programming I/O and sounders T2 .....................................67
Programming I/O and sounders. Panel outputs ...........................68
Programming I/O and sounders. Auxiliary board ..........................69
Programming I/O and sounders alarm verification .........................70
Sound settings ....................................................71
Change date/time ..................................................72
Change zone text ..................................................73
Change text.......................................................74
Change panel text..................................................75
Configure zones ...................................................76

4INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
Change passcode ..................................................77
Add zone .........................................................78
Delete zone.......................................................79
Add device .......................................................80
Delete device .....................................................81
Configure heat detectors ............................................82
Network filter .....................................................83
Network filter .....................................................84
Language ........................................................85
Day/night.........................................................86
Password protection ................................................87
SECTION 4: APPENDIX ........................................88
System wiring .....................................................88
Detector base wiring (CAB300) .......................................89
Call point wiring (CBG370S/CBG370WP) ................................90
Base sounder wiring (CAS380, CASBB384) ..............................90
Loop powered beacon wiring (CAB382) .................................91
Wall sounder wiring (CAS381, CASB383)................................91
IP66 wall sounder wiring (CAS381WP, CASB383-WP) ......................92
Base Sounder VAD (CASBB394).......................................93
Wall Sounder VAD (CASB393) ........................................94
IP66 Wall Sounder VAD (CASB393WP)..................................95
3 way input output unit (CIO351, CIO351S, CIO351SST) ...................96
1 Channel mains rated I/O unit wiring (CMIO353) .........................97
Zone monitor unit wiring (CZMU352) ...................................98
Intrinsically safe zone monitor unit wiring (CZMU352-IS)....................99
Shop monitor unit wiring (MSU840) ...................................100
Spur isolator wiring (CSI350) ........................................101
4 Way sounder controller wiring (CSC354CPR) ..........................102
4-20mA interface wiring (CGI420, CIT420, CGI420R, CIT420R)..............103
Micro zone monitor module wiring (MIU872)............................104
Micro input module wiring (MCIM) ...................................105
Micro output module wiring
(MCOM, MCOM-R, MCOM-S) .......................................106
Technical I/O Unit Wiring (CFC301) ....................................107

5INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
DOCUMENT UPDATE NOTES
S.No. Release / Change Notes Date
AEaton Update November 2020
PROPRIETARY NOTICE
All data and information contained within this manual is of a proprietary nature. Do
not reproduce, transcribe, store in a retrieval system or translate into any language,
any part of this manual without the prior permission of ‘EATON‘. EATON reserves the
right to make changes to product specification without notice or liability. Every care
has been taken to ensure the accuracy of the information contained in this manual,
but no liability can be accepted for any errors or omission.
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
The information, recommendations, descriptions and safety notations in this
document are based on Eaton Corporation’s (“Eaton”) experience and judgment and
may not cover all contingencies. If further information is required, an Eaton sales
office should be consulted. Sale of the product shown in this literature is subject
to the terms and conditions outlined in appropriate Eaton selling policies or other
contractual agreement between Eaton and the purchaser.
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE OR MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET
OUT IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH
CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE CONTENTS OF
THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY ANY CONTRACT
BETWEEN THE PARTIES.
In no event will Eaton be responsible to the purchaser or user in contract, in tort
(including negligence), strict liability or other-wise for any special, indirect, incidental
or consequential damage or loss whatsoever, including but not limited to damage
or loss of use of equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims against the
purchaser or user by its customers resulting from the use of the information,
recommendations and descriptions contained herein. The information contained in
this manual is subject to change without notice.

6INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
SUPPORT SERVICES
The goal of Eaton is to ensure your greatest possible satisfaction with the operation
of our products. We are dedicated to providing fast, friendly, and accurate assistance.
That is why we offer you so many ways to get the support you need. Whether it is
by phone, fax, or email, you can access Eaton’s support information 24 hours a day,
seven days a week. Our wide range of services is listed below. You should contact
your local distributor for product pricing, availability, ordering, expediting and repairs.
Website
Use the Eaton website to find product information. You can also find information on
local distributors or Eaton’s sales offices.
www.eaton.com
EatonCare Customer Support Center
Call the EatonCare Support Center if you need assistance with placing an order,
stock availability or proof of shipment, expediting an existing order, emergency
shipments, product price information, returns other than warranty returns, and
information on local distributors or sales offices.
Voice: 877-ETN-CARE (386-2273) (8:00 a.m. to 6:00 p.m. EST)
After-Hours Emergency: 800-543-7038 (6:00 p.m. to 8:00 a.m. EST)

7INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Contents
Important Safety Information
Personnel who install, maintain or repair this equipment
must read the safety information below before
starting work.
Definitions and Symbols
WARNING
Indicates a potentially hazardous situation which, if
not avoided, can result in serious injury or death.
CAUTION
Indicates a potentially hazardous situation which, if
not avoided, can result in minor to moderate injury, or
serious damage to the product.
General Safety Precautions
NOTICE
The operating system of the control panel may be
revised as a result of enhancements to the system
software or hardware. Revisions to this manual will be
issued and supplied on request and should be logged
in the table supplied on the contents page.
CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY
AN INCORRECT TYPE. DISPOSE OF THE USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
This product must only be disposed of in
accordance with the WEEE directive.

8INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 1: System installation and design
Section 1: System installation and design
Introduction
The Panel provides all of the sophisticated features required of a leading edge
analogue addressable fire system along with the simple operation and neat
installation demanded by installers and building users.
The panel can be flush or surface mounted and the generously sized metal back box
allows ample facilities for rear or top cable entries.
The panels are available in either Single or Two LoopConfiguration.
A loop connected and a network connected repeater panel is available (see
equipment listing page 10).
A comprehensive range of ancillary devices is available to operate with the Panel,
including Optical, photo-thermal and heat detectors, base mounted and stand alone
sounders (including an IP67 version) a loop powered beacon and a wide range of
input and output interfaces.
Each of the Panel system components has been specifically designed to operate as
part of a Panel system, this provides an assurance that the panel, the detectors, the
interfaces and the ancillaries are all fully compatible with each other and that the full
range of system functionality is supported by each device.
Project planning
The following is a typical program and timetable for a Panel installation project, once
the initial order has beenreceived:
1. Project meeting
Installer and user to be present; system specifications, schematic diagram and
proposed circuit drawing to be available. Panel Installation & Commissioning Guide to
beprovided.
2. Equipment fix
Typically 2 week’s notice is required for equipment to be delivered. Cable to be
installed and bases/back boxes to be fitted. Then fire detectors, call points, alarm
sounders, isolator units and interface units to be installed.
3. Address schedule
Schedule of sensor locations to be completed by installer and returned to enable
System programming.
4. Auto learn
Fire panel/repeater panels to be installed and terminated. System to be powered up
by installer and auto learn mode activated (see Auto Learn section). System to be
tested and verified by installer, prior to final commissioning.

9INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 1: System installation and design
5. Final commissioning
Minimum 2 weeks notice is required from receipt of Address Schedule and
Commission request form. Eaton Lighting Service Engineer to attend site implement/
oversee the final commissioning procedures (see Commissioning section), in
conjunction with the installer.
System design guidelines
Guidelines
Systems should to the relevant local standards and codes of practice, for the UK
this is BS5839 part 1. The panel meets all the relevant requirements of BS5839 part
1: 2002. Installation planning is simplified by the fact that every addressable device
contains an integral short circuit isolator. Care must be taken to ensure that local
standards requirements regarding aspects such as loop coverage, area covered by a
single spur and cable specification areobserved.
There may be certain applications in which deviations from the code may be
necessary and these must be listed on the commissioning certificate. (See
commissioning section).
Loop lengths
The maximum permitted loop length is 2 km measured from the near to the far
terminals on Panel Motherboard PCB. There is no minimum limit to loop length. Any
wiring spurs off the loop must be included within the 2 km limit. On long loop runs,
the lengths of wiring rises and falls (between floors, down to manual call points)
must be included. Remember to include these especially when taking loop lengths
from plan drawings.
Loop loading - total number of addresses
The total number of addresses per loop is 200. This includes sensors, call points
and all other addressable items (e.g. interfaces, loop repeaters etc.) When designing
systems its recommended that allowances are made for future expansion, Short
circuit isolators are incorporated into every loop device, including Smoke sensors,
heat sensors, sounders, callpoints and interfaces. Therefore, no further fault
protection is required , in the event of a single fault, none of the devices connected
to the loop will fail to operate as the fault will be isolated by the
two adjacent devices.
Spur connected devices downstream of a cable fault will cease to function.
Loop connected repeater panels
Each repeater unit requires one address and consumes no more current from the
loop than a smoke sensors. The repeater also requires a local mains supply and
incorporates battery backup.
Loop loading system verification
Loop load calculations should be carried out prior toinstillation.

10 INSTALLATION AND OPERATION MANUAL 25-16328-B November 2020 www.eaton.com
Section 1: System installation and design
Compatible equipment:
Order code Description Dimensions (mm)
DF6100 1 Loop Addressable Panel 375H x 357W x 50D
DF6100NC 1 Loop Addressable Panel c/w Network Card 375H x 357W x 50D
DF61002 2 Loop Addressable Panel 375H x 357W x 50D
DF61002NC 2 Loop Addressable Panel c/w Network Card 375H x 357W x 50D
400002FIRE-0008X Addressable Optical Sensor (MAP820) 101 Dia x 33D
400003FIRE-0009X Addressable Heat Sensor (MAH830) 101 Dia x 33D
400004FIRE-0010X Addressable Photo Thermal Sensor (MAOH850) 101 Dia x 33D
MAB50R Addressable Beam Detector (50m) 210H x 130W x 120D
MAB100R Addressable Beam Detector (100m) 210H x 130W x 120D
MAB800 Addressable Sensor Base 104 Dia x 22D
MAS850 Addressable Sounder Base 120 Dia x 40D
CAS380AU Addressable Australian Sounder Base 120 Dia x 40D
MASB870 Addressable Sounder Beacon Base 115 Dia x 44D
CASBB384-B Addressable Bell Tone Sounder Beacon Base 115 Dia x 44D
CASBB394 Addressable VAD Sounder Beacon Base (Open Class) 115 Dia x 44D
FXN251D Conventional Remote Indicator (Connects to Detector) 87H x 87W x 30D
CIR301WP Conventional Weatherproof Remote Indicator
(Connects to Detector) 87H x 87W x 30D
MRIAD Addressable Remote Indicator 87H x 87W x 49D
MBG813 Addressable Callpoint 87H x 87W x 57D
MBG817 Addressable Weatherproof Callpoint 87H x 87W x 59D
MAS850LPS Addressable Wall Sounder 105H x 105W x 95D
MAS850LPSWP Addressable Weatherproof Wall Sounder 108H x 109W x 103D
CAS381AU Addressable Australian Wall Sounder 105H x 105W x 95D
CAS381AU-WP Addressable Australian Weatherproof Wall Sounder 108H x 109W x 103D
MAB870 Addressable Beacon 95 Dia x 53D
MASB860 Addressable Wall Sounder Beacon 105H x 105W x 95D
MASB860WP Addressable Weatherproof Wall Sounder Beacon 108H x 108W x 103D
CASB393 Addressable Wall VAD Sounder Beacon 105H x 105W x 95D
CASB393WP Addressable Weatherproof Wall VAD Sounder Beacon 108H x 108W x 103D
CGI420 Addressable 4-20mA Interface 130H x 180W x 60D
CGI420R Addressable 4-20mA Interface with Relay 130H x 180W x 60D
CSC354CPR Addressable 4-Way Sounder Controller 300H x 300W x 74D
CZMU352 Addressable Zone Monitor Unit 88H x 147W x 57D
CZMU352-IS Addressable Zone Monitor Unit (Intrinsically Safe) 88H x 147W x 57D
MSU840 Addressable Shop Unit Monitor 88H x 147W x 57D
CSI350 Addressable Spur Isolator 88H x 147W x 57D
CMIO353 Addressable Mains Relay 130H x 180W x 60D