Eaton xComfort CHCA-00 User manual

1
EU
xComfort CHCA-00/01
MA_CHCA-00/xx.qxd/01.2015g/
136211176
Eaton Industries (Austria) GmbH, A-3943 Schrems
www.eaton.eu/documentation

2
Scope of delivery:
1x Smart Home Controller, 1x Power Supply, 1x LAN-Cable, 1x Wall Mounting Plate , 2x Screws & 2x Dowels,
4x Adhesive Rubber Feet, 1x Mounting Instruction + Correct Use of xComfort
T=+5°C - +45°C
T=-25°C - +70°C
IP20
MRF
Min. Version 2.19
868,3 MHz
CHCA-00/01 CMMZ-00/37
max. 15

3
CLICK CLICK
1.
2.
ca. 60-90% ca. 80-95% ca. 20-60% ca. 0-10% ca. 70-90%
1. Mounting A B

4x
1.
1.
2.
2.
4
A B

Power
5VDC,
2A
USB
B
USB
A
micro
SD
LAN
LED1 LED2
LAN SD USB-A USB-B Power
Connectors:
5
Functions: Symbol LED Function
Power Green: Power ON, USE
Orange: Booting
Network Red: No Internet
connection Orange: Internet connection
Green: Remote Server Connection
RF Traffic Green: RF traffic
System Message Yellow: Message in the Mailbox
Battery Green: All batteries OK
status Yellow : At least one battery is weak
(assigned sensors) Red: One is very weak or empty
Symbol Button Function
Recovery No RF programming functionality!
1. Restore default admin password and network settings to
DHCP: Press button for 15 seconds (power LED flashes
green and will finally change to orange), system will reboot.
2. Complete Recovery, software & default settings being
copied from SD card. Please backup your settings as they
will be lost during recovery process. Disconnect the power
supply, insert the EATON microSD card, during
reconnecting the power supply - keep the button pressed
for ~ 3 sec till the power LED switches from orange to red.
The flashing red power LED indicates the update process.
Make sure the power supply is not disconnected and the
sd card is not removed. System will reboot when finished.
In case of a failed recovery process, all LEDs will flash red
and please contact your Eaton support contact person.
MRF Icon Function
Double Click on Ident Smart Home Controller
Icon in MRF Green Blinking 30s (Ident)
>MRF2.19
Connectors Functionality
LAN Ethernet
Communication
micro SD System Rescue
Boot Recovery
USB A reserved
USB B reserved
Power Power supply
LAN LED
OFF ON Blink
LED1 valid Link Data activity
LED2 100Mbit 10Mbit

6
2. Connect Router: IP address: is assigned via DHCP automatically
1.
2.
Orange: Booting Green: USE
< 6 min.
3. Connect Power:

MRF
> 2.19
7
6. Connect Laptop for configuration via LAN
(optional WLAN - Password required!)
5. Configure RF Network (xcomfort)

8
7.B. 7.B Discovery in Windows
1. Open Windows Explorer and click on "Network"
2. UPnP Devices will appear on right side of window
7. Connect to Smart Home Controller
7.A. Check IP-Address in
MRF & Click on it => Browser opens
3. Double click on "Eaton Smart Home Controller"

9
4. The Browser opens and shows the login page
5. Login with Username and Password
7.C. Discovery in Mac OS
1. Open: Safari
2. Click the Bookmark icon:
3. Select Bonjour:
4. Double click Bookmark: Smart Home Controller
5. The browser opens and shows the login page:
6. Login with Username and Password
Default login settings:
User: admin
Password: admin
Default login settings:
User: admin
Password: admin
8. Smart Home Controller Configuration
Step 1: Activate Remote Access (System => Remote)
Step 2: Update Smart Home Controller to latest Software before configuration (System => Firmware)
Step 3: Start configuration after update has been completed
Please read the Smart Home Controller help documentation for further configuration steps.

10
Affixing date of CE mark:
2013
Doc.Id.:
CHCA-00/01 (contains RF-Modul CSCZ-01/xx)
Heinz Ursprunger Friedrich Schröder
Director Product Line
Director Quality
& Marketing Management & EHS
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare that product (family)
Eaton - Smart Home Controller,
CHCA-00/01 (contains RF-Modul CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalog)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
EMC Directive 2004/108/EC
Radio and Telecommunications Terminal Equipment 99/05/EC
RoHS Directive 2011/65/EU
based on compliance with European standard(s):
EN55022/10, EN55024/10
covered by RF-Modul CSCZ-01/xx: EN301489-3 V1.6.1, EN300220-2
V2.4.1, EN50491-5-1/10, EN50491-5-2/10, EN60950-1/06 + A11/09 +
A1/10 + A12/11 + A2/13, EN62479/10
01.12.2014