Eaton BSPM2275TN User manual

Instruction Sheet 3A1519RevA Effective December 2015 Supersedes December 2010
BUSSMANN
SERIES
Hazardous Voltage
Will cause severe injury or death
Working on or near energized circuits
poses a serious risk of electrical shock.
De-energize all circuits before installing
or servicing this equipment and follow
all prescribed safety procedures
YEAR
WARRANTY
Warranty
See document No. 3A1502 at
www.cooperbussmann.com/surge
for limited warranty details.
Indoor use only
35mm
DIN-Rail
90mm L x 36mm W x 73mm H
Torque 4 N•m
System installation
Class II IEC 61643-11...
Type 2 EN 61643-11...
There is no distance required
from the SPD to any earthed
conductive surface.
Module replacement
Green =
Good
Red =
Replace
Visual indication status
Green
Green =
Good
RedRed =
Replace
Remote contact signaling
(modules installed)
Mounting
Green
Remove/test
Remote OK
Testing contact signaling
(modules removed)
IEC 61643-11 Class II, two-pole SPDs for
TN and TT 230/400V IEC applications
BSPM2275TN(R) and BSPH2275TT(R)
Fusing
Conductors
Remote contact signaling
System type TN TT
L-N N-PE
Voltage UNTol: 0V...UC230/400V 230/400V
Voltage UC
[L N] 275V~ 275V~
[N PE] 275V~ 255V~
fN50/60Hz
Ifi —100Arms
Max. fuse 125A gG
ISCCR 50kArms —
Imax 40kA
Operating environment -40°C to +80°C, 5%-95% RH
IPE <0.15mA <5µA
Types: W/O remote BSPM2275TN BSPH2275TT
W/ remote BSPM2275TNR BSPH2275TTR
Replacement
modules
[L N] — BPM275IEC —
[L PE] BPM275IEC —
[N PE] BPM275IEC — BPSNPEIEC
Ports 1
IP rating IP20 built-in
L x W x H 90mm x 36mm x 73mm
Fusing and minimum
conductors
F1 A gG S2/mm2S3/mm2F2 A gG
25 4 6 —
35 4 6 —
40 4 6 —
50 6 6 —
63 10 10 —
80 10 10 —
100 16 16 —
125 16 16 —
>125 16 16 125
Wiring
TN (-C) -S connection TT connection
**
S3
S2
* Module BPM275IEC
***
S3
S2
* Module BPM275IEC
** Module BPSNPEIEC

Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
Eaton.com
Bussmann Division
114 Old State Road
Ellisville, MO 63021
United States
Eaton.com/bussmannseries
© 2015 Eaton
All Rights Reserved
Printed in Germany
Publication No. 3A1519RevA/1548E
December 2015
Update 12.15
Mat. Nr. 3005276
Eaton and Bussmann are valuable
trademarks of Eaton in the U.S. and other
countries. You are not permitted to use
the Eaton trademarks without prior written
consent of Eaton.
IEC 61643-11 Class II, two-pole SPDs forTN and TT IEC applications
Instruction Sheet 3A1519RevA Effective December 2015