Eaton CEMU-01/03 Manual

1
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation
MA-ctaa-0x-03.qxd / 05.2019i / IL019053ZU / 136211161
All Rights Reserved / Printed in Austria
www.eaton.com/recycling
EU
xComfort CTAA-0X/03, CTAA-0X/03-LED
ca. 60-90% ca. 80-95% ca. 20-60% ca. 0-10% ca. 70-90%
T=+5°C - +40°C
T=-25°C - +70°C
IP20
F
R
MRF
Min. Version 3.5
Min. Version 1.53
CTAA-01/03 CTAA-02/03 CTAA-04/03
CTAA-01/03-LED CTAA-02/03-LED CTAA-04/03-LED
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio

Инструкция по монтажу

Montagehandleiding
Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Kullanma Talimatı
Инструкција за монтажу
Intruksjonsblad
Монтажна інструкція

2
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation
MA-ctaa-0x-03.qxd / 05.2019i / IL019053ZU / 136211161
All Rights Reserved / Printed in Austria
www.eaton.com/recycling

3
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation
MA-ctaa-0x-03.qxd / 05.2019i / IL019053ZU / 136211161
All Rights Reserved / Printed in Austria
www.eaton.com/recycling
CTAA-0X/03-LED

4
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria
© 2019 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation
MA-ctaa-0x-03.qxd / 05.2019i / IL019053ZU / 136211161
All Rights Reserved / Printed in Austria
www.eaton.com/recycling
EU
- type examination performed by:
TÜV Austria Services GmbH, Notified Body
1230 Vienna, Deutschstrasse 10, Austria
Affixing date of CE mark:
2003
Doc.Id.:
CTAA-…_171117
Senior Vice President Director Quality
General Manager & Systems
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility that the product (family)
Eaton - Push Button,
CTAA-…
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN 301489-3 V2.1.1, EN 300220-2 V3.1.1, EN 50491-5-1:2010,
EN 50491-5-2:2010, EN 60950-1:2006 + A11:2009 + A1:2010 +
A12:2011 + A2:2013, EN 62479:2010, EN 50581:2012
17.11.2017
CSAU-01/01
CJAU-01/01
CDAU-01/01
CTAA-01/01
CTAA-02/01
CRCA-00/01
CHSZ-00/01
CBEU-02/01
CBEU-02/02
RF- SYSTEM
BASIC - MODE - CARD