Ebyte E30-780T20S User manual

MBL Series Evaluation Kit User Manual
New generation package compatible Sub-1G wireless module
E30-900MBL-01

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
1
Contents
Disclaimer...............................................................................................................................................................................2
1. Product Overview............................................................................................................................................................... 3
.............................................................................................................................................................. 错误！未定义书签。
1.1 Brief Introduction..................................................................................................................................................... 3
1.2 Size, interface description........................................................................................................................................4
........................................................................................................................................................................................ 4
1.3 Support list................................................................................................................................................................5
2. Software Description.......................................................................................................................................................... 5
2.1 Directory Structure................................................................................................................................................... 5
2.2 IAR Project............................................................................................................................................................... 6
2.3 Main function............................................................................................................................................................7
2.4 Transceiving timing.................................................................................................................................................. 8
2.5 Programming............................................................................................................................................................ 9
3 Quick demo........................................................................................................................................................................12
3.1 Signal line connection............................................................................................................................................ 12
3.2 Serial port assistant.................................................................................................................................................12
4. Common problem............................................................................................................................................................. 14
4.1 Unsatisfactory transmission distance......................................................................................................................14
4.2 Module is easily damaged...................................................................................................................................... 14
4.3 Bit error rate is too high..........................................................................................................................................14
Revise history....................................................................................................................................................................... 14
About us................................................................................................................................................................................15

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
2
Disclaimer
EBYTE reserves all rights to this document and the information contained herein.
Products, names, logos and designs described herein may in whole or in part be
subject to intellectual property rights. Reproduction, use, modification or disclosure to
third parties of this document or any part thereof without the express permission of
EBYTE is strictly prohibited.
The information contained herein is provided “as is” and EBYTE assumes no
liability for the use of the information. No warranty, either express or implied, is given,
including but not limited, with respect to the accuracy, correctness, reliability and
fitness for a particular purpose of the information. This document may be revised by
EBYTE at any time. For most recent documents, visit www.ebyte.com.
Note:
The contents of this manual are subject to change due to product version upgrades
or other reasons.Chengdu Ebyte Electronic Technology Co.,Ltd. reserves the right to
make changes to the contents of this manual without notice or suggestion.This manual
serves only as a user guide and Chengdu Ebyte Electronic Technology Co.,Ltd.
endeavours to provide accurate information in this manual, but Chengdu Billionaire
Electronics Co., Ltd. does not ensure that the contents are completely error-free and
that all statements, information and suggestions in this manual do not constitute any
express or implied warranty.

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
3
1. Product Overview
1.1 Brief Introduction
The MBL series evaluation kits are designed to help users quickly evaluate Ebyte's new generation package
compatible wireless modules. Most of the pins on the board have been led out to the pin headers on both sides,
developers can easily connect a variety of peripheral devices through jumpers according to actual needs.
The kit provides complete software application examples to help customers quickly get started with wireless data
communication development. Different types of Sub-1G wireless modules can be mounted on-board according to
customer needs. All supported modules have pin-compatible packages that can be quickly replaced.

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
4
1.2 Size, interface description
No.
Definition
Function Description
1
3.3V
3.3V Electric pin
2
3.3V
3.3V Electric pin
3
GND
Floor reference ground
4
GND
Floor reference ground
5
3.3V
3.3V Electric pin
6
GND
Floor reference ground
7
REST
MCUExternal reset pin
8
SWIM
SWIM pin of MCU
9
3.3V
3.3V Electric pin
10
VCC
Module power supply pin, need to be
short-circuited with pin 9 to supply power to
the module
11
PC6
MCU ordinary IO
12
PC5
MCU ordinary IO
13
PB3
MCU ordinary IO
14
PB2
MCU ordinary IO
15
PB1
MCU ordinary IO
16
PB0
MCU ordinary IO
17
M1
Module mode switch pin (see module product
manual for details)
18
M0
Module mode switch pin (see module product
manual for details)

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
5
1.3 Support list
RF Chip
Manufacturer
Module model
1
CC1101
Texas Instruments
E07-400M10S
2
CC1101
Texas Instruments
E07-900M10S
3
SI4438
Silicon Labs
E30-400M20S
4
SI4463
Silicon Labs
E30-900M20S
5
LLCC68
Semtech
E220-400M22S
6
LLCC68
Semtech
E220-900M22S
7
SX1278
Semtech
E32-400M20S
8
SX1276
Semtech
E32-900M20S
9
SX1268
Semtech
E22-400M22S
10
SX1262
Semtech
E22-900M22S
2. Software Description
2.1 Directory Structure
Matter
Explanation
1
File Directory
You can download the sample project from the official website, open the directory as shown
in the figure below
2
Catalog
description
You can use the IAR For STM8 development environment to find the entry file to open the
project
19
PD1
MCU ordinary IO
20
PD0
MCU ordinary IO
21
GND
Floor reference ground
22
GND
Floor reference ground
23
5V
5V Electric pin
24
5V
5V Electric pin

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
6
2.2 IAR Project
Matter
Explanation
Engineering
structure
Use the IAR For STM8 development environment to open the project and you can see the
basic structure

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
7
Switch
workspace
The global macro definition and file path are defined in the C/C++ Compiler option to
distinguish the driver files of different modules. When switching workspaces, different macro
definitions will be used to switch the driver files of different modules
Changed the Exclude from build property of Drivers/Ebyte/RF, that is, select the target
module driver folder to participate in the compilation process. Changed the Additional
include in the project C/C++ Compiler, that is, specify the module driver file path. The
Defined symbols in the project C/C++ Compiler have been changed, that is, global macro
definitions have been defined to help configure the module driver properties.
2.3 Main function
The main function entry is in main.c. The demonstration function process is simplified as follows:
Item
Explanation
1
Key Function
If a button is pressed, the command data will be sent wirelessly. In essence, it means
sending a specific string "ping" and expecting to receive a response "pong"

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
8
2
Serial data transfer to
wireless transmission
After the serial port receives the data, it automatically starts to transmit the data
wirelessly. Of course, it contains some special command responses, which are mainly
used for special tests and can be ignored by the user. After the sending is completed,
the user function will be automatically called back to handle the sending logic by
itself.
3
Receive data wirelessly
Generally, the internal status identifier of the module is read to determine whether
there is data, and the underlying driver will copy the data and pass it to the user
callback function, so as to process the receiving logic by itself
The software process is simplified as shown in the figure below:
2.4 Transceiving timing
The wireless module has multiple operating states, and can only perform specific functions in the corresponding
state. From the simplest way of sending and receiving data, only the sending mode and the receiving mode are
considered.
Item
Explanation
1
Receive mode
After the default initialization is completed, it will automatically enter the receiving
mode. In essence, the receiving function is called during initialization, and the
receiving mode is entered. If you need to consider entering other modes after
initialization, such as sleep, just replace it with the same type of function Go_xxxxx().
2
Send mode
When calling the sending function, the bottom driver actually switches the module into
the standby mode first, and usually completes the modulation parameter configuration
in this mode, such as frequency, power, frequency offset, etc. After the parameter
configuration is correct, gradually enter some intermediate modes, turn on the internal
FIFO, PA, external XTAL, etc., and the current consumption also gradually rises.
Finally, it switches to the sending mode and triggers wireless data transmission. After
completion, the module enters the standby mode. In this state, it cannot continue to
send and receive. The user needs to handle the next mode in the callback function.
When the function is complicated, continuous reception or continuous transmission is
required. Please switch to other modes according to the characteristics of the chip.

Chengdu Ebyte Electronic Technology Co.,Ltd. E30-900MBL-01 User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co.,Ltd.
9
The timing diagram is as follows:
2.5 Programming
File
Key note
1
ebyte_core.h
A module structure is defined to abstract the basic functions, and the functions of the
underlying module will be bound to this structure. When used for simple sending and
receiving applications, there is no need to understand the underlying working details of
each module, and you can start sending and receiving data directly by calling the
abstracted function. If you need to customize some functions, you can also consider
integrating them into the structure. If you know enough about the functional functions of
the underlying module, you can also directly remove the ebyte_core.c/h file, and there is