Echelon CONNECT EX5S User manual

1
INSTRUCTION MANUAL
EX-5s

Hello,
I am Lou Lentine, President of Echelon, and I would like to welcome you to the Echelon community. You’ve
made a great decision for yourself and your family. The Echelon Experience is an innovative combination
of fitness products integrated with our state-of-the-art Echelon Fit App. This brand-new, fitness lifestyle
connects your family, friends, the Echelon community, and Echelon instructors together to help you with
your fitness goals. With thousands of live and on-demand classes, no matter your schedule or experience,
there is always a new and exciting class for you to join.
We embrace your decision to join our Echelon family in the pursuit of living a healthier lifestyle. We are
committed to continue engineering cutting edge, world-class fitness products to improve quality of life
through workout experiences that make an active lifestyle more accessible and sustainable.
Thank you again for choosing Echelon and I look forward to seeing you in the next live class!
Best personal regards,
Lou Lentine
CEO, Echelon Fitness Multimedia, LLC

4
4
3
1
8
7
5
6
9
10 13
11 12
14
16
19
18
15
21
17
2220
24
25
2
23
4
INCLUDES
1. Handlebar height
adjustment lever
2. Handlebar post frame
3. Resistance knob/brake lever
4. Crank arms
5. Seat post
6. Seat height adjustment lever
7. Seat slide adjustment knob
8. 21.5" FHD Screen
9. Water bottle holder
10. Handlebars
11. Front foot
12. Rear foot
13. Handlebar post
14. Screen mount
15. Seat
16. Pedals
17. Dumbbell holder
18. Power adapter
19. Double-sided wrench
20. Wrench
21. Small hex key
22. Hex key with Phillips
screwdriver head
23. Handlebar adjustment knob
24. Foot bolts (x4)
25. Water bottle and dumbbell
holder screws (x4)
26. Handlebar post bolt
PARTS LIST
26

5
5
QUICK START GUIDE
ACCOUNT CREATION
If this product was purchased on the echelonfit.com website, you should have received
an activation email. Please follow the steps within the email to activate your account.
Go to member.echelonfit.com and follow the on-screen instructions to choose a plan and setup
your account. This info will be needed to login to your account.
All account info and plans are managed at member.echelonfit.com and use the same login. After creating your
account login on member.echelonfit.com, write down your login info. This will be the same login for the App.
1. Choose "sign up now"
2. Select Purchase location
3. Choose your plan
Monthly / 1 Year / 2 Year
Select purchase location and follow the
on-screen instructions.
4. Set up payment method
5. ENTER PERSONAL ACCOUNT INFO
6. View YOUR ACCOUNT
Where you can edit your billing info, add family
members, manage subscriptions, and (if on your
mobile device) download the app and sign in.
Once assembly is complete, you will be required to
sign into your account, choose a class, and connect
your bike.
account activation
If this product was purchased on the echelonfit.com
website, you should have received an activation email.
Click the link in the activation email and follow the
on-screen instructions. Enter your information to verify
payment information. You will not be charged until
the next month.

6
6
Loosen bolts in order. Remove cardboard and then repeat
on other side.
Remove bolts on both sides with
included tools as shown.
Remove bolts in order.
Remove bolts in order with included
tools as shown.
Hold cardboard piece and remove
frame from bike.
REMOVAL OF FRAME
1
1
2
2
3
1
2
3

7
7
Place the front foot with wheels
facing forward under the
front bracket.
Use a pair of scissors or wire cutters
to cut zip ties around wheel chocks.
Using one of the wrenches, knock
out the front then the back chock.
Use the included hex key to remove
the metal front support bracket.
Tighten down foot bolts with
included hex key.
Insert foot bolts into front foot. Place the rear foot under the
rear bracket.
ASSEMBLY

8
8
Attach dumbbell holder onto seat
post with screws and screwdriver
end of hex key. Recommended not
to exceed (2) 2 lb. dumbbells.
Pull the wire out of frame and the wire from base of handlebar post. DO
NOT UNTIE TWIST TIES AT TOP OF HANDLEBAR POST.
Place seat onto seat post and secure
with included wrench.
Insert foot bolts into rear foot. Tighten down foot bolts with
included hex key.
ASSEMBLY

9
9
Untie the twist tie at top of
handlebar post, ensuring not to
allow the wire to fall inside of
handlebar post. Connect the wire
from the handlebar post to the wire
at bottom of screen mount.
Place handlebars onto handlebar
post. Secure with handlebar
adjustment knob with adjustment
knob washer.
Connect the one wires from frame
and handlebar post together, then
feed excess wire down into frame.
Insert handlebar post screw into
hole on post. Use small hex key to
tighten. Ensure holes in handlebar
post and handlebar post frame align
properly before inserting handlebar
post bolt.
Unscrew handlebar height
adjustment lever, but do not remove.
Pull lever out and fully insert
handlebar post into frame. Release
lever and post is secure.
Feed excess wire into handlebar
postand slide screen mount into
handlebar post. Secure with tablet
mount post bolts.
ASSEMBLY

10
10
Slide water bottle holder onto post and secure with two screws.
TROUBLE CONNECTING?
If your bike does not connect using the process above, navigate to the Settings app on
the tablet and select Apps (on older versions of Android you will select ’Application’ and
then ‘Application manger’). At the top right select the icon (on older vversions, select
‘MORE’) and then select ‘Show system’ or ‘Show system apps’. Select ‘Bluetooth Share’,
then ‘Storage’, and then either ‘Clear Data’ or ‘Clear Cache,’ depending which button is
highlighted. Restart the Echelon Fit™ App and attempt connection again. If you have any
issues after completing this process, please contact us at appsupport@echelonfit.com.
ASSEMBLY

11
11
TROUBLE CONNECTING?
NOTE: WE RECOMMEND HAVING HELP WITH TABLET INSTALLATION.
ASSEMBLY
Remove the four preinstalled screws
and set to the side.
Flip mount around to face away
from Connect bike. Hold tablet up
to mount and hand screw all four
screws into tablet. Use screwdriver
end of hex key to tighten.
Unscrew the three small
preinstalled screws from the cover
on the back of the tablet and set
aside. Flip the tablet back over.
Peel the backing off of the included
wire clip.
Place wire clip, as shown above, and
press and hold wire clip down for
ten seconds for proper adhesion.
Plug in power cord to DC input and
place excess cord in wire clip.

12
12
ASSEMBLY
Pull zip-tie to tighten and secure
cord in place.
Cut excess length off of zip-tie.
Replace the three screws to secure
the cover back on the tablet.
With the power cord still in the
notch, replace cover.
Place power cord in the notch of
the middle perforated section of the
cover and hold in place.
Feed included zip-tie through wire
clip and behind cord, as shown
above.

13
13
ASSEMBLY
Hold pedal with double sided
wrench and use single sided
wrench to tighten nut clockwise.
Finger tighten nut clockwise back
onto pedal bolt.
Remove nut from right pedal by
turning counterclockwise.
Screw right pedal onto right crank
arm clockwise. Use double sided
wrench to ensure pedal is firmly
seated against crank arm.
Remove nut from left pedal by
turning clockwise.
Screw left pedal onto crank arm
counterclockwise. Use double sided
wrench to ensure pedal is firmly seated
against crank arm.
The threads are reversed on LEFT pedal and nut.

14
14
ASSEMBLY
Plug power adapter into port
located on the rear or front foot
bracket, then plug into wall outlet.
Hold pedal with double sided
wrench and use single sided wrench
to tighten nut counterclockwise.
Finger tighten nut counterclockwise
back onto pedal bolt.

15
15
Turn handlebar adjustment lever
counterclockwise until you are able
to pull the lever halfway out.
Pull and hold the handlebar
adjustment lever and raise or lower
the handlebars to desired position.
Ensure lever engages one of the
adjustment holes. Turn handlebar
adjustment lever clockwise until
secure.
Turn seat slide adjustment lever
counterclockwise to loosen.
Turn seat height adjustment lever
counterclockwise until you are able
to pull the lever halfway out.
Move seat along track to desired
location. Turn seat slide adjustment
lever clockwise to tighten and
secure in place.
Pull and hold the seat height
adjustment lever and raise the seat
to desired position. Ensure lever
engages one of the adjustment
holes. Turn seat height adjustment
lever clockwise until secure.
SEAT/HANDLEBAR ADJUSTMENT

16
16
FEDERAL COMMUNICATIONS COMMISSION FCC STATEMENT
15.21
YOU ARE CAUTIONED THAT CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PART RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
15.105B
THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE,
PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE IN A RESIDENTIAL INSTALLATION. THIS EQUIPMENT GENERATES, USES AND CAN RADIATE
RADIO FREQUENCY ENERGY AND, IF NOT INSTALLED AND USED IN ACCORDANCE WITH THE INSTRUCTIONS, MAY CAUSE
HARMFUL INTERFERENCE TO RADIO COMMUNICATIONS. HOWEVER, THERE IS NO GUARANTEE THAT INTERFERENCE
WILL NOT OCCUR IN A PARTICULAR INSTALLATION. IF THIS EQUIPMENT DOES CAUSE HARMFUL INTERFERENCE TO RADIO
OR TELEVISION RECEPTION, WHICH CAN BE DETERMINED BY TURNING THE EQUIPMENT OFF AND ON, THE USER IS
ENCOURAGED TO TRY TO CORRECT THE INTERFERENCE BY ONE OR MORE OF THE FOLLOWING MEASURES:
REORIENT OR RELOCATE THE RECEIVING ANTENNA.
INCREASE THE SEPARATION BETWEEN THE EQUIPMENT AND RECEIVER.
CONNECT THE EQUIPMENT INTO AN OUTLET ON A CIRCUIT DIFFERENT FROM THAT TO WHICH THE RECEIVER
IS CONNECTED.
CONSULT THE DEALER OR AN EXPERIENCED RADIOTV TECHNICIAN FOR HELP.
FCC RF RADIATION EXPOSURE STATEMENT:
1. THIS TRANSMITTER MUST NOT BE COLOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA
OR TRANSMITTER.
2. THIS EQUIPMENT COMPLIES WITH RF RADIATION EXPOSURE LIMITS SET FORTH FOR AN UNCONTROLLED
ENVIRONMENT. THIS EQUIPMENT SHOULD BE INSTALLED AND OPERATED WITH A MINIMUM DISTANCE OF 20 CM
BETWEEN THE RADIATOR AND YOUR BODY.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS:
1 THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
SAFETY INFO AND WARNINGS

17
17
INNOVATION, SCIENCE AND ECONOMIC DEVELOPMENT CANADA ISED
INNOVATION, SCIENCE ET DÉVELOPPEMENT ÉCONOMIQUE CANADA ISED
THIS CLASS B DIGITAL APPARATUS COMPLIES WITH CANADIAN ICES003
CET APPAREIL NUMÉRIQUE DE CLASSE B EST CONFORME À LA NORME NMB003.
CANADIAN NOTICE
THIS DEVICE COMPLIES WITH ISED LICENSEEXEMPT RSS STANDARDS. OPERATION IS SUBJECT TO
THE FOLLOWING TWO CONDITIONS:
1 THIS DEVICE MAY NOT CAUSE INTERFERENCE, AND
2 THIS DEVICE MUST ACCEPT ANY INTERFERENCE, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION OF THE DEVICE.
AVIS CANADIEN
LE PRÉSENT APPAREIL EST CONFORME AUX CNR D’ISED APPLICABLES AUX APPAREILS RADIO EXEMPTS DE LICENCE.
L’EXPLOITATION EST AUTORISÉE AUX DEUX CONDITIONS SUIVANTES :
1 L’APPAREIL NE DOIT PAS PRODUIRE DE BROUILLAGE, ET
2 L’UTILISATEUR DE L’APPAREIL DOIT ACCEPTER TOUT BROUILLAGE RADIOÉLECTRIQUE SUBI, MÊME SI LE BROUILLAGE
EST SUSCEPTIBLE D’EN COMPROMETTRE LE FONCTIONNEMENT.
CAUTION: EXPOSURE TO RADIO FREQUENCY RADIATION.
1. TO COMPLY WITH THE CANADIAN RF EXPOSURE COMPLIANCE REQUIREMENTS, THIS DEVICE AND ITS ANTENNA MUST
NOT BE COLOCATED OR OPERATING IN CONJUNCTION WITH ANY OTHER ANTENNA OR TRANSMITTER.
2. TO COMPLY WITH RSS 102 RF EXPOSURE COMPLIANCE REQUIREMENTS, A SEPARATION DISTANCE OF AT LEAST 20 CM
MUST BE MAINTAINED BETWEEN THE ANTENNA OF THIS DEVICE AND ALL PERSONS.
ATTENTION: EXPOSITION AU RAYONNEMENT RADIOFRÉQUENCE.
1. POUR SE CONFORMER AUX EXIGENCES DE CONFORMITÉ RF CANADIENNE L’EXPOSITION, CET APPAREIL ET SON
ANTENNE NE DOIVENT PAS ÊTRE COLOCALISÉS OU FONCTIONNANT EN CONJONCTION AVEC UNE AUTRE ANTENNE OU
TRANSMETTEUR.
2. POUR SE CONFORMER AUX EXIGENCES DE CONFORMITÉ CNR 102 RF EXPOSITION, UNE DISTANCE DE SÉPARATION
D’AU MOINS 20 CM DOIT ÊTRE MAINTENUE ENTRE L’ANTENNE DE CET APPAREIL ET TOUTES LES PERSONNES
SAFETY INFO AND WARNINGS

18
18
NOTE: CARE SHOULD BE TAKEN IN MOUNTING AND DISMOUNTING THE STATIONARY EXERCISE BIKE. BEFORE
MOUNTING OR DISMOUNTING MOVE THE PEDAL ON THE MOUNTING OR DISMOUNTING SIDE TO ITS LOWEST
POSITION AND BRING THE MACHINE TO A COMPLETE STOP.
THE MANUFACTURER RECOMMENDS TO PLACE THE ECHELON®CONNECT BIKE IN A SPACE WHERE YOU HAVE
TWO FEET OF CLEARANCE ON ALL SIDES OF THE BIKE FOR SAFE MOUNTING AND DISMOUNTING OF THE
EXERCISE BIKE. THE MINIMUM DIMENSIONS ARE: 0.5 M 19.7 IN. ON AT LEAST ONE SIDE, AND 0.5 M 19.7 IN.
EITHER BEHIND OR IN FRONT OF THE EXERCISE BIKE.
WHILE CLEANING YOUR ECHELON®CONNECT BIKE, PLEASE USE A SOFT RAG WITH MILD DETERGENT OR WATER
TO WIPE DOWN THE MACHINE. DO NOT USE CORROSIVE CHEMICAL LIQUIDS WHICH MAY DAMAGE
THE COVER.
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including
the following:
Read all instructions before using THE ECHELON®CONNECT.
DANGER -
To reduce the risk of electric shock:
1. Always unplug this appliance from the electrical outlet immediately after using and
before cleaning.
WARNING - To reduce the risk of burns, fire, electric shock, or injury to
persons:
SAFETY INFO AND WARNINGS

19
19
1. An appliance should never be left unattended when plugged in. Unplug from outlet when
not in use, and before putting on or taking off parts.
2. Do not operate under blanket or pillow. Excessive heating can occur and cause fire, electric
shock, or injury to persons.
3. This appliance is not intended for use by persons with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Keep
children under the age of 13 away from this machine.
4. Use this appliance only for its intended use as described in this manual. Do not use
attachments not recommended by the manufacturer.
5. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if
it has been dropped or damaged, or dropped into water. Return the appliance to a service
center for examination and repair.
6. Do not carry this appliance by supply cord or use cord as a handle.
7. Keep the cord away from heated surfaces.
8. Never operate the appliance with the air openings blocked. Keep the air openings free of lint,
hair, and the like.
9. Never drop or insert any object into any opening.
10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
12. To disconnect, turn all controls to the off position, then remove plug from outlet.
SAFETY INFO AND WARNINGS

20
20
BEFORE starting any fitness or strength program, consult with your physician or health
official. This will ensure that you engage in the proper strength or fitness program for your
age and physical condition.
Before using the Echelon®Connect, answer these questions:
· Have you been sick recently?
· Have you had prolonged dizziness recently?
· Have you been out of breath for no reason recently?
· Have you had chest pain recently?
· Do you currently have any injuries preventing you from exercise?
· Are you pregnant?
· Do you have any conditions or reasons you should NOT exercise?
· Are you over 35 years old and physically inactive?
· Have you been told by a doctor that you should NOT exercise?
IF YOU ANSWER “YES” TO ANY OF THE ABOVE QUESTIONS, YOU SHOULD SEEK FURTHER
ADVICE FROM YOUR DOCTOR PRIOR TO USING THE ECHELON®CONNECT.
Read the user manual fully and follow all instructions. This ensures your safety.
• ALWAYS use the Echelon®Connect on solid, level ground and in a well lit and ventilated area.
• ALWAYS check that the seat and handlebars are securely fastened before use.
• NEVER allow children to play on or around the bike. This helps protect them from injury from moving
parts.
• ALWAYS set the bike up properly for your specific body type. The Echelon®Connect offers up/down and
fore/aft adjustments that are clearly marked to ensure a quick and easy customization for each workout.
• ALWAYS check the bike before use.
SAFETY INFO AND WARNINGS