Ecler PLAYER ZERO User manual
2
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
TABLE OF CONTENTS
1. PRECAUTIONS........................................................................................................................5
1.1 Important Remark..............................................................................................................................5
1.2 Important Safety Instructions ........................................................................................................6
1.3 Cleaning................................................................................................................................................6
2. FEATURES................................................................................................................................7
2.1 Main Features......................................................................................................................................7
3. INSTALL & CONNECT ...........................................................................................................8
3.1 Location, set up and ventilation....................................................................................................8
3.2 AC connection and powering on ..................................................................................................8
3.3 Audio output connections...............................................................................................................9
3.4 Ethernet port for configuration and Internet connection ......................................................9
3.5 Wi-Fi interface for configuration and Internet connection...................................................9
3.6 GPI remote control ports.............................................................................................................. 10
4. START-UP and OPERATION............................................................................................ 11
4.1 Restore default / Firmware Update .......................................................................................... 11
5. PANEL FUNCTIONS............................................................................................................ 12
5.1 Front Panel........................................................................................................................................ 12
5.2 Rear Panel......................................................................................................................................... 12
6. TECHNICAL DATA .............................................................................................................. 13
6.1 Technical Specifications ............................................................................................................... 13
6.2 Mechanical Diagram ...................................................................................................................... 16
7. Web GUI (v1.00r0) .............................................................................................................. 18
7.1 First Steps ......................................................................................................................................... 18
7.1.1 Quick Guide for Ethernet Connection....................................................................... 21
7.1.2 Quick Guide for WiFi Connection............................................................................... 21
7.2 Device................................................................................................................................................. 22
7.2.1 Player .................................................................................................................................. 22
7.2.2 Presets................................................................................................................................ 25
7.2.3 Events.................................................................................................................................. 29
7.2.4 Calendar............................................................................................................................. 33
7.2.5 Cloud Disk Sync............................................................................................................... 45
7.2.6 Store and Forward (rsync)............................................................................................ 46
7.2.7 Scripts / LUA..................................................................................................................... 50
7.3 Network ............................................................................................................................................. 57
7.3.1 Connection via RJ-45 cable.......................................................................................... 58
7.3.2 Point-to-point wireless connection........................................................................... 61
3
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
7.3.3 Connecting to a WiFi network.................................................................................... 63
7.4 System................................................................................................................................................ 65
7.4.1 Name and Time................................................................................................................ 65
7.4.2 Security............................................................................................................................... 67
7.4.3 Backup, Restore and Firmware................................................................................... 70
7.4.4 USB/MMC Settings......................................................................................................... 72
7.4.5 Register .............................................................................................................................. 75
7.4.6 Reboot................................................................................................................................. 76
7.5 SSH server configuration for Store & Forward (rsync)....................................................... 77
7.5.1 Content groups ................................................................................................................ 78
7.5.2 Installing SSH on Linux................................................................................................. 79
7.5.3 Creating users on Linux ................................................................................................ 80
7.5.4 Generating SSH keys..................................................................................................... 81
7.5.5 Adding audio content to the SSH server................................................................. 82
7.5.6 Configurind the remote source in the player.......................................................... 83
8. TP-CONTROL PLAYER JSON Commands PRODUCT OVERVIEW ........................ 85
8.1 Player Commands .......................................................................................................................... 85
8.2 Configurations Commands.......................................................................................................... 88
8.3 Preset Commands .......................................................................................................................... 89
8.4 Event Commands............................................................................................................................ 89
8.5 Calendar Commands..................................................................................................................... 89
8.6 Store and Forward Commands.................................................................................................. 89
8.7 Script Commands ........................................................................................................................... 90
8.8 Register Commands ...................................................................................................................... 90
8.9 Device Commands.......................................................................................................................... 90
8.10 Panel Commands............................................................................................................................ 91
9. PLAYER LUA SDK Introduction ....................................................................................... 92
9.1 PLAYER LUA SDK V1.02 .............................................................................................................. 93
9.1.1 Changelist.......................................................................................................................... 93
9.2 How to use PLAYER module ...................................................................................................... 93
9.2.1 Conventions ...................................................................................................................... 94
9.2.2 Player Functions.............................................................................................................. 94
9.2.3 Config. (CFG) Functions ................................................................................................ 97
9.2.4 Preset Functions.............................................................................................................. 98
9.2.5 Event Functions..............................................................................................................100
9.2.6 Event Variables..............................................................................................................100
9.2.7 Calendar (CAL) Functions ..........................................................................................101
9.2.8 Store and Forward (SAF) Functions........................................................................102
4
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
9.2.9 Register (LOG) Functions ...........................................................................................102
9.2.10 Device (DEV) Functions...............................................................................................103
9.2.11 Panel Functions .............................................................................................................104
9.2.12 Finder Functions ............................................................................................................105
9.2.13 LCD Functions................................................................................................................105
5
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
1. PRECAUTIONS
1.1 IMPORTANT REMARK
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
WARNING (If applicable): The terminals marked with symbol of “ ” may be of
sufficient magnitude to constitute a risk of electric shock. The external wiring connected to
the terminals requires installation by an instructed person or the use of ready-made leads
or cords.
WARNING:To prevent fire or shock hazard, do not expose this equipment to rain or
moisture.
WARNING:A device with Class I construction shall be connected to a mains socket-
outlet with a protective earthing connection.
WARNING: This product must not be discarded, under any circumstance, as
unsorted urban waste. Take to the nearest electrical and electronic waste
treatment centre.
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
6
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
1.2 IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this device near water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance with
the manufacturer’s instructions.
8. Do not install near any heat sources
such as radiators, heat registers,
stoves, or other device (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of
the polarized or grounding type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not
fit into your outlet, consult an
electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
the plugs, convenience receptacles,
and at the point where they exit from
the device.
11. Only use attachments/accessories
specified by the manufacturer.
12. Unplug the device during lightening
sorts or when unused for long periods
of time.
13. Refer all servicing to qualified
personnel. Servicing is required when
the device has been damaged in any
way, such as power supply cord or
plug is damaged, liquid has been
spilled or objects have fallen into the
device, the device has been exposed
to rain or moisture, does not operate
normally, or has been dropped.
14. Disconnecting from mains: When
switching off the POWER switch, all
the functions and light indicators of
the unit will be stopped, but fully
disconnecting the device from mains
is done by unplugging the power
cable from the mains input socket. For
this reason, it always shall remain
easily accessible.
15. Equipment is connected to a socket-
outlet with earthing connection by
means of a power cord.
16. The marking information is located at
the bottom of the unit.
17. The device shall not be exposed to
dripping or splashing and that no
objects filled with liquids, such as
vases, shall be placed on device.
1.3 CLEANING
Clean the unit with a soft, dry clean cloth or slightly wet with water and neutral
liquid soap only, then dry it with a clean cloth. Be careful that water never gets
into the unit through any hole. Never use alcohol, benzine, solvents or abrasive
substances to clean this unit.
NEEC AUDIO BARCELONA, S.L. accepts no liability for any damage that may be caused
to people, animal, or objects due to failure to comply with the warnings above.
7
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
Thank you for choosing our device Ecler PLAYER ZERO!
We appreciate your trust.
It is VERY IMPORTANT to carefully read this manual and to fully understand its
contents before any connection in order to maximize your use and get the best
performance from this equipment.
To ensure optimal operation of this device, we strongly recommend that its maintenance
be carried out by our authorised Technical Services.
Ecler PLAYER ZERTO comes with a 3-year warranty.
2. FEATURES
PLAYER ZERO is a compact stereo audio player able to play music content from local
storage devices (USB/MICRO SD), Internet streaming services (online radios, etc.) and
digital media exchange (DLNA, AirPlay) with the following main features.
2.1 MAIN FEATURES
•1 unbalanced stereo audio output, RCA connector and mini-jack (with stereo/mono
selection).
•Compatible with mp3, ogg, WAV, AIFF and FLAC audio formats.
•One USB port and one MICRO SD card slot for access to local media content.
•Ethernet interface with RJ45 connector for communication with web setup
application as well as Internet streaming reception.
•Wi-Fi interface (client or master mode) for communication with web application
configuration as well as Internet streaming reception.
•Fully configurable through web application (point-to-point or through the same
LAN)
•2 GPI (General Purpose Inputs) ports, to trigger the 2 available events.
•Silence detection event.
•Internal clock with up to 240h autonomy (without AC adapter) and automatic
synchronization with NTP services.
•Modular firmware: PLAYER ZERO has a firmware with modular services that allow
each user to personalize its operation and adapt it to the size of his project or to his
business model. The firmware includes, among other functions and services:
oCalendar event triggering
8
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
oSynchronization of cloud content (Cloud Disk Sync): compatible with
Google Drive service
oExecution of scripts (user-written instruction files in lua language -
www.lua.org).
oLocal file encryption (USB/MICRO SD)
oActivity Log
PLAYER ZERO programming is done through the web application embedded in
the unit. Refer to the PLAYER ONE & PLAYER ZERO web GUI application manual for more
information.
3. INSTALL & CONNECT
3.1 LOCATION, SET UP AND VENTILATION
The PLAYER ZERO has been specially designed to be used both as a desktop player and
a 19" rackmount unit, occupying third a rack space (with VEO-RACK19, optional
mounting kit for standard rack cabinets).
In professional installations, it should preferably be placed in the same rack as the audio
sources.
Since its power consumption is very low, forced ventilation is not necessary. However,
avoid exposing the device to extreme temperature and the environment in which it is
placed should be as dry and clean (no dust) as possible.
3.2 AC CONNECTION AND POWERING ON
PLAYER ZERO is powered by alternating current (AC) through its external power supply:
100-240 VAC, 50-60 Hz. This external power supply has several interchangeable
connectors: American, European, British and Chinese.
The operating environment should be dry and be totally free of dust. Do not expose the
unit to dripping or splashing. Do not place incandescent objects like candles on top of it.
If the unit requires any intervention and/or connection/disconnection, it must be powered
off first. There are no user-serviceable parts within the unit. To avoid buzzing, do not allow
the power cable to intertwine with audio shielded cables.
9
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
3.3 AUDIO OUTPUT CONNECTIONS
PLAYER ZERO has 1 unbalanced stereo output on its rear panel.
The signal output connectors are 2 x RCA and 1 x stereo mini-jack.
3.4 ETHERNET PORT FOR CONFIGURATION AND INTERNET CONNECTION
An RJ-45 connector allows the unit to be connected to an Ethernet network or even
directly (point-to-point) to a computer.
This connection provides access to Internet contents, and to the configuration of the unit
using a web browser on the computer, which points to the IP address of the PLAYER ZERO,
showing the web application embedded in the unit. Refer to the PLAYER ONE & PLAYER
ZERO web GUI application manual for more information.
3.5 WI-FI INTERFACE FOR CONFIGURATION AND INTERNET CONNECTION
A Wi-Fi interface allows the unit to be connected to a Wi-Fi network or even directly
(point-to-point) to a computer by Wi-Fi.
This connection provides access to Internet contents, and to the configuration of the unit
using a web browser on the computer, which points to the IP address of the PLAYER ZERO,
showing the web application embedded in the unit. Refer to the PLAYER ONE & PLAYER
ZERO web GUI application manual for more information.
10
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
3.6 GPI REMOTE CONTROL PORTS
PLAYER ZERO has 2 GPI control inputs on its rear panel. These inputs can be connected
to an external physical device (e.g. a contact closure) and associated with an PLAYER
ZERO function:
•Load and play previously configured audio content
•Preset recall
•Audio playback with priority over the music program
•Transport bar control (PLAY/PAUSE, STOP, etc.)
•Internal triggering, to interact with other player services (scripts for example)
GPI connectors use 3-position screw terminal blocks (Euroblocks). The wiring is as follows:
GPI terminal
>
− 1, 2 terminals
Ground
>
⊥terminal
Figure 1: Connection example of GPI 2
Connecting cables can be up to 500 meters long with a minimum section of 0,5 mm2.
11
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
4. START-UP and OPERATION
Ecler recommends configuring PLAYER ZERO with your web application to enjoy its full
functionality. Please refer to the PLAYER ONE & PLAYER ZERO web GUI application
manual to know all the functionality it offers.
Plug the power cord into the back of the device to turn it on.
4.1 RESTORE DEFAULT / FIRMWARE UPDATE
PLAYER ZERO has two functionalities that can be be done via the FD/FS button on the
rear panel:
•Restore Factory Defaults: Restore factory settings. Press and hold the FD/FS button
on the rear panel for 10 seconds with a small pin or paper clip while the unit is
powered on.
•Fail Safe (Restore firmware): Install the latest firmware published on the Ecler
website or a firmware file hosted on one of the local storage systems (USB/MICRO
SD).
While the unit is unplugged, press and hold the FD/FS button with a small pin or
paper clip and then plug in the unit. The front LEDs will start flashing rapidly for 3
seconds (at this point the FD/FS button can be released).
To restore the latest released firmware, it is necessary to connect the device to a
DHCP server with Internet access, to download the firmware.
If this action is not performed correctly, you may lose all device settings and parameters.
Be sure to save a backup copy of the device settings before executing this action.
12
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
5. PANEL FUNCTIONS
5.1 FRONT PANEL
1. ON LED: power indicator.
2. SP LED: signal present indicator.
3. NET LED: network traffic
indicator.
4. SD LED: Micro SD source
operation indicator.
5. MICRO SD/MICRO SDHC slot:
for local audio content playback.
Up to 2TB. FAT16/32 format.
6. USB 2.0 port: for local audio
content playback. Up to 2TB.
FAT16/32 and NTFS format.
7. WiFi Antenna.
5.2 REAR PANEL
8. Security flange for power supply
cable
9. External power supply
connector
10. 2 x RCA stereo output
11. Stereo mini-jack output
12. RJ-45 connector
13. Factory Default / Fail Safe button
14. GPI Port
15. Indicator Light, WIFI
13
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
6. TECHNICAL DATA
6.1 TECHNICAL SPECIFICATIONS
PLAYER ZERO
DIGITAL ENGINE
Processor
MIPS Single Core 64bits 580MHz
AUDIO CONVERTERS
Sampling rate
48kHz
Resolution
16bit
Bit rate
32~320kbps
Frequency response
5Hz - 24kHz (-3dB)
MEDIA PLAYER
Audio sources
Local storage (USB & microSD), Internet
radio, AirPlay, DLNA
Dynamic range
From -80 dB to 0 dB
THD + Noise
< 0.008% (1kHz, 1Vrms)
ANALOGUE AUDIO OUTPUTS
Number of outputs
2 x Stereo output (unbalanced)
Connection type
RCA estéreo, minijack 3,5mm
Max output level
6dBV / 5k ohm
Output impedance
460 ohm
Dynamic range
TBC
Crosstalk
TBC
CONNECTIVITY
Ethernet
RJ45 10/100Mbps
Wi-Fi
2.4GHz Wi-Fi, 802.11 b/g/n
Wi-Fi antenna
Front panel
Programing and control
Web Application, RePLayer & Gallery.
Third party integration: JSON
REMOTE CONTROL CONNECTIONS
GPIs
2 ports, Dry contact to ground, 3 pin Terminal
block
14
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
REAL-TIME CLOCK
Retention time
240 hours aprox.
Accuracy
±1 minute / month
MONITORING AND CONTROL
Display
No
LED indicators
Front panel: NET, SP, SD, Power
Rear panel: Wifi
Buttons
Rear panel: Factoty Defaults / Fail Safe (pin-
hole)
LOCAL STORAGE
Micro SD
Front panel micro SD slot
Supports micro SD SDXC
USB
Front panel USB female connector
Support USB 2.0 High Speed (480 Mbps)
Capacity
Up to 2TB
File system
Supports FAT16, FAT 32, VFAT and NTFS
(read-only)
Multi-partition up to 1
Playable audio files
mp3, ogg, WAV, FLAC, AIFF, m3u, pls
Files analysis
65354 playable folders
65354 playable folders within each folder
65354 playable files within each folder
Folder hierarchy
Up to 8 containing the root directory
Sorting
UNICODE
Up to 100 folders, 100 files by folder
(Folders/files over 100 sorted in the FAT
order)
ELECTRICAL
Power supply
External, universal, 5VDC (included)
AC mains requirement
90-264VCA 50-60Hz
AC mains connector
International AC plugs set
Power consumption
4.5 VA / 2.2 W
Ventilation
Passive
15
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
PHYSICAL
Operating temperature
Min 0°C, +32°F
Max +35°C, +95°F
Operating humidity
< 85% HR
Storage temperature
Min -10°C, +14°F
Max +50°C, +122°F
Storage humidity
< 90% HR
Installation options
Desktop, rack (1/3 of 1UR)
Included accessories
AD/DC Power Supply, WiFi antenna,
adhesive rubber feet, rack tray screws , GPI
connector, warranty card and standard user
guide
Optional accessories
VEO-RACK19 Compatible
Dimensions (WxHxD)
126.5 x 44 x 132 mm / 4.98” x 1.73” x 5.19“
Weight
0.6 Kg / 1.32 lb
Shipping dimensions
450 x 220 x 60 mm / 17.71” x 8.66” x 2.36”
Shipping weight
0.8 Kg / 1.76 lb
18
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
7. Web GUI (v1.00r0)
PLAYER ONE / PLAYER ZERO has a web application, embedded in the device itself,
that allows you to configure it. It is not necessary to install any additional software.
With this application, you can configure the device’s advanced options, create playlists,
schedule calendar events, create scripts or control basic functions remotely. The
application can be accessed in a web browser from any device that is connected to the
same local network, via Ethernet (wired) or WiFi.
7.1 FIRST STEPS
In order for the device to access the PLAYER ONE / PLAYER ZERO web application, it must
be connected to the network, either via a cable (RJ-45 connector) or wirelessly (WiFi).
•Wired (Ethernet connection): By default, PLAYER ONE / PLAYER ZERO is set to
DHCP mode. It will be assigned an IP address automatically.
oMake sure that the static IP network parameters are compatible with your
local network and the existing IP range of the system.
Figure 2: example of connection to a local network via the Ethernet network interface (wired)
19
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
•WiFi: PLAYER ONE / PLAYER ZERO has a WiFi network interface, which means that
mobile devices can stream audio to the device. It can be configured wirelessly. There
two modes of operation:
oMASTER mode: point-to-point connection. The device's WiFi network
interface is set to this mode by default. Connect your WiFi device (computer,
smartphone, etc.) as a client of the device via your WiFi network wizard
(connect to the PLAYER-WIFI network, default SSID). The default
password is: 0123456789.
Please Note:
in this operating mode, no Internet connection is available.
However, it will be useful when opening the web application for the first
time and configuring the network parameters according to your needs.
oCLIENT mode: this connection mode allows the device to connect to your
preferred WiFi network. Mobile devices must then be connected to the
same network in order to be able to configure PLAYER ONE / PLAYER
ZERO. If your WiFi network has an Internet connection, both PLAYER ONE
/ PLAYER ZERO and the mobile devices will have Internet access.
Figure 3: example of connection to a local network via WiFi network interface (wireless)
20
T.O.C.
PRECAUTIONS
FEATURES
INSTALL
&
CONNECT
1
TECHNICAL
DATA
PANEL
FUNCTIONS
START-UP
&
OPERATION
WebGUI
SW
TP-CONTROL
LUA-SDK
PLAYER ONE / PLAYER ZERO devices use the mDNS service so that they can be accessed
intuitively through a web browser on the same local area network (LAN). To access the
web application easily, enter “devicename.local/” into the search bar of your browser. By
default this is, "playerone.local/" for PLAYER ONE, "playerzero.local/" for PLAYER ZERO.
Figure 4: access via mDNS service
If you prefer (or if the mDNS service is not available), you can also access the device using
the IP assigned to the PLAYER ONE / PLAYER ZERO:
•PLAYER ONE:
oPress and hold the MENU button for a few seconds until the configuration
menu appears.
oNavigate by pressing the NEXT button, until the display shows WIFI or
ETHERNET, depending on the chosen connection.
oPress the rotary encoder (SELECT)
•PLAYER ZERO:
As there is no screen to show you the IP, you need to find it on the web GUI of the
DHCP server (Switch/Router). Refer to the manufacturer's documentation.
Figure 5: web GUI Router example
Type the IP address of the device into the navigation bar of your browser (the IP shown in
Figure 15 does not have to match the one assigned to your device).
Table of contents
Other Ecler Media Player manuals
