Eddylight LED PAR 64 User manual

LED PAR 64
RGBAW LED LIGHT
DSY-LP-64-177
USER MANUAL

1. Introduction
Thank you for purchasing our LED PAR 64 light. Please read these
instructions carefully before operating to avoid any possible damage and
accidents caused by misuse.
The LED PAR 64 light has a hydrodynamic aluminum shell. Five colors of
high-brightness LED lights (red, blue, green, amber, white) are used to
create a wide spectrum of colors. Each color can be independently
dimmed, faded and so on. It uses a power switch, draws low power and is
low weight. The built-in programs include dimming, fade, strobe, gradual
change and more. The unit is compatible with the standard DMX 512
signal for external DMX control. Practical uses of the product include
dance halls, stage backgrounds, hotels, large-scale performances,
drapery uplighting and stage lighting.
Packing List
- LED PAR 64 light
- User manual
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
- Before installation, please check the light’s fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor use, below 40 degrees celsius
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected

3. Dimensions and Specifications
Voltage: AC110V/220 VAC
Frequency: 50-60 Hz
Power Consumption: 28 W
Lamp: 10mm x 177pcs LED
Beam Angle: 25 degrees
Net Weight: 2 Kg
Dimensions:
3
www.EddyLight.com 1-800-914-3538

4. Main Function
5 Channel Mode
Channel
DMX
Value
Function
Notes
1
0-255
Red dimming
0—100%
2
0-255
Green dimming
0—100%
3
0-255
Blue dimming
0—100%
4
0-255
Amber dimming
0—100%
5
0-255
White dimming
0—100%
6 Channel Mode
Channel
DMX
Value
Function
Notes
1
0-255
Red dimming
0—100%
2
0-255
Green dimming
0—100%
3
0-255
Blue dimming
0—100%
4
0-255
Amber dimming
0—100%
5
0-255
White dimming
0—100%
6
0-255
Master Dimming

9 Channel Mode
Channel
DMX
Value
Function
Notes
1
0-255
Red dimming
0—100%
2
0-255
Green dimming
0—100%
3
0-255
Blue dimming
0—100%
4
0-255
Amber dimming
0—100%
5
0-255
White dimming
0—100%
6
0-255
Master Dimming
7
0-9
No function
7
10-200
Strobe; speed
7
201-255
Max strobe speed
8
0-15
No function
8
16-201
Color presets
Overrides color
selection from
CH1-5
8
202-240
Preset program;
speed
Overrides color
selection from
CH1-5
8
241-255
Sound activation
Overrides color
selection from
CH1-5
9
0-15
No function
Overrides color
selection from
CH1-5
9
16-255
Color changing;
speed
Overrides color
selection from
CH1-5
5
www.EddyLight.com 1-800-914-3538

5. Rear Panel Display and Operation
DMX OUT DMX IN
Menu Up Down Enter
LED Display
Selection buttons
DMX input/output
MENU: Access the menu or return to a previous menu option
UP: Menu selection or parameter increments
DOWN: Menu selection or parameter increments
ENTER: Select the current menu option
6. Instructions for Manual Programming
MENU items:
•!“addr”: DMX mode (d001-d512)
•“SLAV”: Slave mode
•“CHnd”: DMX channel mode (5CH/6CH/9CH)
•!”SP”; built-in program speed change mode (SP00-SP15)
•!”Pr”; Built-in presets (Pr00-Pr31)
•!”ASC”; colors jumping (AC00-AC15 speed adjustable)
•!”FAdE”: colors fading mode (FA00-FA15 speed adjustable)
•!”FLAS”: white strobe/flashing (FL00-FL15 speed adjustable)
•!”rL”: red color brightness adjustment mode (r000-r255)
•!”gL”: green color brightness adjustment mode (g000-g255)
•!”bL”: blue color brightness adjustment mode (b000-b255)
•!”AL”: amber color brightness adjustment mode (A000-b255)
•!”WL”: white color brightness adjustment mode (W000-b255)
•!“SouA”: Sound-activated no strobe mode

Press ENTER to access the submenu. This process can be saved
automatically, which means you will enter the menu mode saved
previously when you activate the light next time. For example, if you want
to choose DMX mode A001, operate as follows:
•Press MENU, to go back to the main menu
•Press UP / DOWN until “Addr”
•Press ENTER to choose, the display will blinking
•Press UP / DOWN to change the address code to select “d001”
•Press ENTER to select and store the current menu option.
To Select Color Presets: (Pr- -)
•Press MENU, to go back to the main menu
•Press UP / DOWN until “Pr--”; Press ENTER to choose
•Press UP / DOWN to change the menu code to select “pr00”
•Press ENTER to select and store the current menu options.
Color Chart
7
www.EddyLight.com 1-800-914-3538
Color
Name
Red
Green
Blue
Amber
White
!
Red
255
0
0
0
0
!
Green
0
255
0
0
0
!
Blue
0
0
255
0
0
!
Amber
0
0
0
255
0
!
White
0
0
0
0
255
!
Yellow
255
255
0
0
0
!
Magenta
255
0
255
0
0
!
Cyan
0
255
255
0
0
!
Champagne
0
0
0
255
255
!
Cold White
255
255
255
0
0
!
Warm White
255
255
255
255
255

7. Master/Slave Control
The MASTER functions as a master as long as it’s not in DMX mode (and
ideally no cable plugged into the DMX INPUT on the unit). It sends a
signal to the SLAVE through a DMX cable and synchronizes its settings to
it. Do not use more than 20 lamps or 60m of DMX cable.
The SLAVE units should be set to DMX mode and the address code set to
“A001” to receive the MASTER’s signal. Only one light can be set as a
master, but multiple lights can be set as slaves.
8. Cable Connection
A standard XLR connection is used for the DMX 512 protocol:
Note: In order to avoid failures and signal interference, it is recommended
to connect a 120Ωresistor (1/4W) at the end of the DMX connection as
shown below:
DMX512 does not include automatic error checking and correction, and so
is not an appropriate control for hazardous applications, such as
pyrotechnics or movement of theatrical rigging. False triggering may be
caused by electromagnetic interference, static electricity discharges,
improper cable termination, excessively long cables, or poor quality
cables.