EGO BC3800E User manual

EN 56 volt lithium-ion rear motor bike-handle
brush cutter 7
DE 56 volt lithium-ionen-gestrüppschneider
mit heckmotor und lenkergriff 18
FR Débroussailleuse à guidon, moteur
arrière et batterie lithium-ion 56 v 31
ES Desbrozadora con batería de ion de litio
de 56 voltios y motor trasero, con manillar 44
PT Roçadeira com guiador e motor traseiro
de ião e lítio de 56 volts 57
IT Decespugliatore con manubrio e motore
posteriore agli ioni di litio 56 volt 69
NL 56 volt Lithium-Ion bosmaaier met
motor aan de achterkant en stuurgreep 81
DK Buskrydder med 56volt litium-ion-
batteridrevet motor og styr 94
SE Röjsåg med 56 V litumjonbatteridriven
bakre motor och styrstångshandtag 106
FI 56 voltin litiumioniakulla varustettu
tankokahvainen pensasleikkuri 118
NO 56 volt litium-ion busktrimmer med
bakplassert motor og sykkelhåndtak 130
RU Кусторез слитий-ионным аккумулятором
56 в, задним расположением двигателя и
рукояткой велосипедного типа 142
PL Kosa do zarośli z kierownicąrowerowąz
silnikiem z tyłu i bateriąlitowo-jonową
56woltów 156
CZ 56 voltový lithium-iontový křovinořez s
motorkovou rukojetí 169
SK 56 voltový lítium-iónový krovinorez s
motorkovou rukoväťou 181
HU 56 voltos lítium-ion fűkasza hátsó motorral és
kétkaros fogantyúval 193
RO Trimmer pentru tușuri cu acumulator de
litiu-ion de 56v, motor posterior și ghidon 205
SL 56-voltna litij-ionska motorna kosa s kolesarskim
krmilom in končno nameščenim motorjem 217
LT 56 voltųličio jonųkrūmapjovėsu varikliu
gale ir dviračio formos rankena 229
LV 56 voltu litija jonu krūmgriezis ar aizmugurē
uzstādītu motoru un velosipēda stūres
formas rokturi 241
GR Θαμνοκοπτικο 56 volt λιθιου-ιοντων, οπισθιου
κινητηρα, μεχειρολαβη τυπου ποδηλατου 253
TR 56 volt lityum-iyon arka motorlu bisiklet
kollu çali tirpani 267
ET 56-voldise liitiumioonakuga tagumise
mootori ja u-käepidemega võsalõikur 278
UK 56-вольтний літій-іонний кущоріз із заднім
мотором івелосипедною ручкою 289
BG Храсторезс56Vлитиево-йоненакумулатор,
задендвигателивелосипеднаръкохватка
302
HR Obrezivačgrmljasastražnjimmotoromi
sklopomdrškiilitij-ionskombaterijom
na56volti 315
KA
56 ვოლტიანი ლითიუმ-იონის აკუმულა-
ტორის მქონე ბუჩქის საკრეჭი, მოტორის
უკანა განლაგებით და ველოსიპედის
ტიპის სახელურით 326
SR Trimersazadnjimmotorom,kormanomi
litijum-jonskombaterijomod56volti 343
BS Čistačšikaresastražnjimmotoromiupravljačkim
rukohvatomslitij-ionskombaterijomod56V 354
HE
S
OPERATOR’S MANUAL
56 VOLT LITHIUM-ION
REAR MOTOR
BIKE-HANDLE BRUSH CUTTER
MODEL NUMBER BC3800E

56


366
377
AR
MNL_EGO_BC3800E_EV01.31_200907

4
12
515
16
17
19
20
21
22
18
910
12
11
13
7
8
23
A
3
6
24
14
CH2100E, CH5500EBA1120E, BA1400,
BA2240E, BA2800,
BA3360, BA4200,
BA1400T, BA2800T,
BA4200T, BA5600T,
BA2240T

CB
D E
F
H1 H2
GG-1
G-2
G-3
G-4
G-5
G-6
G-7

H3 H4
I J
N
K L
M
N-1
I-1
I-2 I-3
I-4
I-5
J-1
J-2
I-6
L-1
L-2 L-3
I-7
K-2
K-1
N-2
N-3
M-1

S
R2 R3
R4
O P
Q R1
P-1 P-2
1
2

TU
VW1
W2
X Y
W3
14 cm
2.5 m
2
1
12

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 7
EN
READ ALL INSTRUCTIONS!
READ OPERATOR’S MANUAL
Residual risk! People with electronic devices, such
as pacemakers, should consult their physician(s) before
using this product. Operation of electrical equipment
in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
WARNING: To ensure safety and reliability, all repairs
and replacements should be performed by a qualied
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention and
understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they
give are no substitutes for proper accident prevention
measures.
WARNING: Be sure to read and understand all
safety instructions in this Operator’s Manual, including
all safety alert symbols such as “DANGER,” “WARNING,”
and “CAUTION”before using this tool. Failure to follow all
instructions listed below may result in electric shock, re,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER,
WARNING, or CAUTION, may be used in conjunction with
other symbols or pictographs.
WARNING: The operation of any
power tools can result in foreign objects
being thrown into your eyes, which can
result in severe eye damage. Before
beginning power tool operation, always
wear safety goggles or safety glasses with
side shields and a full face shield when
needed. We recommend a Wide Vision
Safety Mask for use over eyeglasses or
standard safety glasses with side shields.
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate it.
Safety Alert Indicates a potential
personal injury hazard.
Read
Operator’s
Manual
To reduce the risk of
injury, user must read and
understand the operator’s
manual before using this
product.
Wear Eye
Protection
Always wear safety goggles
or safety glasses with side
shields and a full face shield
when operating this product.
Wear Ear
Protection
Always wear sound barriers
(ear plugs or ear mufflers) to
protect your hearing.
Wear Head
Protection
Wear an approved safety hard
hat to protect your head.
Wear
Protective
Gloves
Protect your hands with
gloves when handling blade
or blade guard. Heavy-duty,
nonslip gloves improve your
grip and protect your hands.
Wear
Safety
Footwear
Wear non-slip safety
footwear when using this
equipment.
Beware
of blade
thrust
Warn the operator of the
danger of blade thrust.
Ricochet
and Keep
Bystanders
Away
Thrown objects can ricochet
and result in personal injury
or property damage. Ensure
that other people and pets
remain away from the brush
cutter when it is in use.
15m
Keep
Bystanders
Away
Ensure that other people
and pets remain at least
15m away from the line
trimmer when it is in use.
No round
blade
Do not install round cutting
blades.
Do not
expose to
rain
Do not use in the rain or
leave outdoors while it is
raining.
CE
This product is in
accordance with applicable
EC directives.
Original instructions

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E8
EN
WEEE
Waste electrical products
should not be disposed of
with household waste. Take
to an authorized recycler.
XX
Noise
Guaranteed sound power
level. Noise emission to the
environment according to
the European community’s
Directive.
V Volt Voltage
Direct
Current
Type or a characteristic of
current
n0
No Load
Speed Rotational speed, at no load
... /min Per Minute Revolutions per minute
GENERAL POWER TOOL SAFETY WARNINGS
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury.
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
WORK AREA SAFETY
◾Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
◾Do not operate power tools in explosive atmospheres,
such as in the presence of ammable liquids, gases or
dust. Power tools create sparks which may ignite the
dust or fumes.
◾Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
PERSONAL SAFETY
◾Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the inuence of drugs, alcohol medication. A
moment of inattention while operating power tools may
result in serious personal injury.
◾Use personal protective equipment. Always wear eye
protection. Protective equipment such as a dust mask,
non-skid safety shoes, hard hat or hearing protection used
for appropriate conditions will reduce personal injuries.
◾Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your nger on the
switch or energizing power tools that have the switch
on invites accidents.
◾Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result
in personal injury.
◾Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
◾Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair
can be caught in moving parts.
◾If devices are provided for the connection of dust
extraction and collection facilities, ensure these
are connected and properly used. Use of dust
devices can reduce dust-related hazards.
◾Do not let familiarity gained from frequent use of
tools allow you to become complacent and ignore
tool safety principles. A careless action can cause
severe injury within a fraction of a second.
POWER TOOL USE AND CARE
◾Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the
job better and safer at the rate for which it was designed.
◾Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
◾Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
◾Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect
the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
◾Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
◾Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 9
EN
◾Keep handles and grasping surface dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
◾Keep cables away from the working area of the
tool. During operation cables may be hidden from view
and can be accidentally damaged by the tool.
BATTERY TOOL USE AND CARE
◾Recharge only with the charger specied by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of re when used with
another battery pack.
◾Use power tools only with specically designated
battery packs. Use of any other battery packs may
create a risk of injury and re.
◾When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a re.
◾Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, ush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
◾Do not use a battery pack or tool that is damaged
or modied. Damaged or modied batteries may
exhibit unpredictable behavior resulting in re,
explosion or risk of injury.
◾Do not expose a battery pack or tool to re
or excessive temperature. Exposure to re or
temperature above 100 °C may cause explosion.
◾Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specied in the instructions. Charging
improperly or at temperatures outside the specied
range may damage the battery and increase the risk
of re.
SERVICE
◾Have your power tool serviced by a qualied repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
◾Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
WARNING: Read all safety warnings,
instructions, illustrations and specications
provided with this power tool. Failure to follow all
instructions listed below may result in electric shock,
re and/or serious injury. Save all warnings and
instructions for future reference.
Save all warnings and instructions for future
reference.
TRAINING
◾Read the instructions carefully. Be familiar with the
controls and the proper use of the machine.
◾Never allow people unfamiliar or children with these
instructions to use the appliance. Local regulations can
restrict the age of the operator.
◾Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their
property.
PREPARATION
◾Never operate the machine while people, especially
children, or pets are nearby.
◾Wear eye protection and stout shoes at all times while
operating the machine.
◾The distance between the machine and bystanders shall
be at least 15m.
◾Never operate the machine while the operator is tried, ill
or under the inuence of alcohol or other drugs.
OPERATION
◾Use the machine only in daylight or good articial light.
◾Never operate the machine with damaged guards or
shields or without guards or shields in place.
◾Switch on the motor only when the hands and feet are
away from the cutting means.
◾Always disconnect the machine from the power supply
(i.e. remove the battery pack).
◾whenever leaving the machine unattended;
◾before clearing a blockage;
◾before checking, cleaning or working on the
machine.
◾after striking a foreign object;
◾whenever the machine starts vibrating abnormally.
◾Take care against injury to feet and hands from the
cutting means.
◾Always ensure that the ventilation openings are kept
clear of debris.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E10
EN
MAINTENACE AND STORAGE
◾Disconnect the machine from the power supply
(i.e. remove the battery pack) before carrying out
maintenance or cleaning work.
◾Use only the manufacturer’s recommended
replacement parts and accessories.
◾Inspect and maintain the machine regularly. Have the
machine repaired only by an authorized repairer.
◾When not in use, store the machine out of the reach
of children.
OTHER SAFETY WARNINGS
◾Avoid Dangerous Environments – Don’t use
appliances on damp or wet slope.
◾Keep guards in place and in working order.
◾Keep hands and feet away from the cutting area.
◾To reduce the risk of injury, never work on a ladder
or on any other insecure support. Never hold the
cutting unit above waist height.
◾Check the cutting unit at regular short intervals
during operation, or immediately if there is a
noticeable change in cutting behavior.
◾For best results, your battery should be charged in a
location where the temperature is greater than 5° C
and less than 40° C. Do not store it outside or in vehicles.
◾If you are approached, stop the motor and cutting unit.
◾Warn the operator of the danger of blade thrust
(only using with 3-teeth blade).
◾Blade thrust may occur when the spinning blade
contacts an object that it does not immediately cut.
◾Blade thrust can be violent enough to cause the unit
and/or operator to be propelled in any direction, and
possibly lose control of the unit.
◾Blade thrust can occur without warning if the blade
snags, stalls or binds.
◾Blade thrust is more likely to occur in areas where it
is difcult to see the material being cut.
◾Do not attach any blade to a unit without proper
installation of all required parts. Failure to use the
proper parts can cause the blade to y off and
seriously injure the operator and/or bystanders.
Discard blades that are bent, warped, cracked,
broken, or damaged in any way. Use a sharp blade
A dull blade is more likely to snag and thrust
(only using with 3-teeth blade).
◾A coasting blade/line can cause injury while it
continues to spin after the motor is stopped or
trigger is released. Maintain proper control until
the blade/line has completely stopped rotating.
◾Use only with battery packs and chargers listed in
g.A.
◾Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
even when the tool is not operating. Take care when
performing maintenance or service.
◾Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾If situations occur that are not covered in this
manual, use care and good judgment. Contact the
EGO Customer Service Center for assistance.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Cutting unit Trimmer head 3-teeth metal
blade
Voltage 56 V 56 V
Recommended
Operating
Temperature:
0°C-40°C
Recommended
Storage Temperature: -20°C-70°C
No-load Speed 4500-6000 /min 4500-6000 /min
Cutting Line Type 2.4mm nylon
twist line /
Cutting blade / ABB1203
Cutting Width 38 cm 30 cm
Weight (without
battery pack) 4.43 kg 4.64 kg
Measured sound
power level LWA
94.4 dB(A)
K=1.6 dB(A)
94.04 dB(A)
K=1.71 dB(A)
Sound pressure level at
operator’s position LPA
80.9 dB(A)
K=2.5 dB(A)
80.0 dB(A)
K=4.1 dB(A)
Guaranteed sound
power level LWA
(measured according
to 2000/14/EC)
96 dB(A) 96 dB(A)
Valuation of
vibration ah
Left
handle
2.32 m/s2
K=1.5 m/s2
1.55 m/s2
K=1.5 m/s2
Right
handle
1.78 m/s2
K=1.5 m/s2
1.88 m/s2
K=1.5 m/s2
◾The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 11
EN
◾The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE: The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
PACKING LIST
PART NAME QUANTITY
Brush Cutter 1
3-teeth blade with Sheath 1
Guard Assembly 1
Nut 1
Outer Flange 1
Hex Wrench 1
Multi-Function Wrench 1
Double-shoulder Strap 1
Operator’s Manual 1
DESCRIPTION
KNOW YOUR BRUSH CUTTER (Fig. A)
1. Speed Limiting Lever
2. Lock-off Lever
3. Wing Bolt
4. Trigger
5. Bike Handle
6. Shaft
7. Cutting Line
8. Guard Assembly
9. Trimmer Head
10. Sealing Screw
11. Shaft-locking Hole
12. Guard Accessory
13. Multi-Function Wrench
14. Hex Wrench
15. 3-teeth Blade
16. Outer Flange
17. Nut
18. Release Button
19. Rubber Pad Protection
20. Latch
21. Electric Contactsms
22. Ejection Mechanism
23. Strap Buckle
24. Hip-pad
WARNING: Never operate the tool without the
guard rmly in place. The guard must always be on
the tool to protect the user.
WARNING: When the tool is equipped with a trimmer
head, the guard accessory with line–cutting blade should
be mounted onto the guard. Failure to comply will result in
overly long cutting line and overload the motor. Never use
the trimmer head without guard accessory.
ASSEMBLY
WARNING: If any parts are damaged or missing, do
not operate the brush cutter until the parts are replaced.
Use of the brush cutter with damaged or missing parts
could result in serious personal injury.
WARNING: Do not attempt to modify the brush
cutter or create accessories not recommended for use
with this product. Any such alteration or modication is
misuse and could result in a hazardous condition leading
to possibly serious personal injury.
WARNING: Always wear heavy gloves when
installing or removing the guard and doing any
maintenance on the 3-teeth blade/line-cutting blade. Be
careful of the line-cutting blade on the guard accessory /
3-teeth blade for protecting your hands from being injured
by both the blades.
WARNING: To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the tool when assembling parts or transporting
the machine.
WARNING: Never operate the tool without the guard
and bike handle rmly in place. Failure to comply could
result in possible serious personal injury.
MOUNTING AND ADJUSTING THE BIKE HANDLE
The brush cutter is stored as shown in Fig. B. Firstly,
loosen the wing bolt on the connecting joint and then lift
the bike handle 180° around the shaft (Fig. C), turn it 90°
anticlockwise to make it face the bump head (Fig. D).
Lastly, move it back and forth to achieve a comfortable
working position and tighten the bolt.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E12
EN
NOTICE: Operating the machine with the bike handle
perpendicular to the shaft is only permitted.
MOUNTING THE GUARD
Loosen and remove the two screws from the guard (Fig. E),
align the guard mounting holes with the assembly holes
and then lock the guard onto the shaft base with the two
screws, together with two spring washers (Fig. F).
Make sure the guard is fixed according to Fig. E & F, any
reverse fixing will cause great danger!
REPLACE THE TRIMMER HEAD WITH THE 3-TEETH
BLADE
Know the trimmer head Fig. G and follow the steps as Fig.
H1 - Fig. H4 shown (refer to the section “line replacement”)
to disassemble the trimmer head. To mount the blade
follow the steps below:
1. To mount the metal blade unit (Fig. I).
2. Remove the guard accessory by loosening the three
screws with washer (Fig.J).
3. The blade is shipped with a sheath. Before mounting
the blade onto the brush cutter, the sheath should be
removed by undoing the clamp wire from the hook on
the sheath (Fig. K).
Fig. G-K parts description see below:
G-1 Inner Flange I-3 Flange Cover
G-2 Upper cover I-4 3-teeth blade
G-3 Spool I-5 Outer Flange
G-4 Nut I-6 Nut
G-5 Cutting Line I-7 Slot in the Flange
G-6 Spring J-1 Line-cutting Blade
G-7 Lower Cover
ASSY
J-2 Guard Accessory
I-1 Motor Shaft K-1 Clamp Wire
I-2 Inner Flange K-2 Hook
NOTICE: To protect against injury, you have to wear
gloves prior to any operation with the 3-teeth blade.
4. Rotate the motor shaft to align the slot in the inner ange
with the shaft-locking hole in the gear case (Fig. L)
5. Insert the hex wrench into the aligned holes to act as a
stabilizer (Fig. M).
Fig. L & M parts description see below:
L-1 Gear Case L-3 Motor Shaft
L-2 Aligned Shaft-locking
Holes
M-1 Stablizer
6. Mount the blade onto the motor shaft, ensuring
that the suface of the blade is ush with the
surface of the inner ange bulge. Mount the outer
ange and the nut (Fig. N). Pre-tighten the nut in a
COUNTERCLOCKWISE direction by hand.
Fig .N parts description see below:
N-1 Nut
N-2 Outer flange
N-3 3-teeth blade
7. Position the gear case against a solid surface for
support. With one hand hold the brush cutter shaft
and the other hand grasp the multi-function wrench
to tighten the nut following the directional arrow icon
marked on the outer ange (Fig. O).
USE OF GUARD ACCESSORY
NOTICE: When the brush cutter is equipped with a trimmer
head, the guard accessory must be mounted onto the guard.
Secure the guard accessory onto the guard by tightening
the three screws with the hex wrench due to the line-
cutting blade is equipped on the guard accessory. Failure
to comply could result in an overly long cutting line and
motor overload.
OPERATION
WARNING: Do not allow familiarity with this product
to make you careless. Remember that a careless fraction
of a second is sufcient to inict serious injury.
WARNING: Always wear eye protection, along with
hearing protection. Failure to do so could result in objects
being thrown into your eyes and other possible serious
injuries.
WARNING: Do not use any attachments or
accessories not recommended by the manufacturer of
this product. The use of attachments or accessories not
recommended can result in serious personal injury.
APPLICATIONS
You may use the brush cutter for the purpose listed below:
◾With 3-teeth metal blade: Cutting grass, weeds,
wild growth and scrub, thinning young stands with a
maximum stem diameter of 2cm.
◾With Trimmer Head: Trimming grass and weeds from
around porches, fences and decks.
NOTICE: The tool is to be used only for its prescribed
purpose. Any other use is deemed to be a case of misuse.
ATTACHING/DETACHING THE BATTERY PACK
Fully charge before rst use.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 13
EN
To Attach
Align the battery rib with the mounting slots and press the
battery pack down until you hear a “click” (Fig. P).
To Detach
Depress the battery-release button and the battery pack
out (Fig. Q).
Fig. P parts description see below:
P-1 Mounting Slot
P-2 Rib
MOUNT THE DOUBLE-SHOULDER STRAP AND
HOLDING THE MACHINE
Put the double-shoulder strap on your body and insert
the two parts of the strap buckle into each other until a
click is heard (Fig. R1). Align the hook of hip pad into hole
of the tubing clip xed on the shaft, and press the shaft
down softly (Fig. R2 & R3 & R4).
Hold the line trimmer with both hands on the right side of
your body (Fig. S). The trimmer head or blade should be
parallel to the ground at a proper cutting distance without
the operator bending over.
Releasing the brush cutter can be achieved in two ways;.
Release the strap buckle (Fig. T) or press the hook of the
strap and take it apart from the tubing clip xed on the
shaft (Fig. R2).
WARNING: When emergency occurs, take it off from
your shoulder immediately, no matter what way the strap
is in. Releasing the strap buckle (Fig. T) and both hands
taking off your shoulders at each side is a quick release
method.
WARNING: You should not use the single-shoulder
strap and double-shoulder strap simultaneously.
STARTING/STOPPING THE BRUSH CUTTER
To Start
Press down the lock-off lever and hold it in that position.
Depress the trigger to start (Fig. U).
Different pressure on the trigger results in variable
rotating speed of the cutting unit. If necessary, adjust the
speed limiting lever to set the maximum speed.
NOTICE: The speed limiting lever can also be preset to
limit the trigger travel.
To Stop
Release the trigger.
NOTICE: The motor runs only when the lock-off lever and
trigger are both pressed.
WARNING: Always remove the battery pack from the
line trimmer during work breaks and after nishing work.
USING THE MACHINE
WARNING: Dress properly to reduce the risk of
injury when operating the brush cutter. Do not wear loose
clothing or jewelry. Wear eye and ear/hearing protection.
Wear heavy duty, long trousers, boots and gloves. Do not
wear short trousers, sandals or go barefoot.
Before operating, look around you to ensure a safety working
area without other people, animals or any loose objects.
Make sure they are at least 15m away. And then check for
eye protection, proper clothing and balanced footing.
Before each use check for damaged/worn parts.
Check the trimmer head, 3-teeth blade, guard, guard
accessory, bike handle and double-shoulder strap and
replace any parts that are cracked, warped, bent, or
damaged in any away.The line-cutting blade on the
edge of the guard accessory can dull over time. It is
recommended that you periodically sharpen it with a file
or replace it with a new blade.
After each use, clean the brush cutter
USING WITH TRIMMER HEAD
Adjusting cutting line length
The trimmer head allows the operator to release more cutting
line without stopping the motor.As line becomes frayed or
worn, additional line can be released by lightly tapping the
bump knob on the ground while operating the trimmer (Fig.V).
NOTICE: Line release will become more difficult if the
cutting line becomes too short.
WARNING: Do not remove or alter the line-cutting
blade assembly. Excessive line length will cause the motor
to overheat and may result in serious personal injury.
Line Replacement
NOTICE: Always use the recommended nylon cutting
line with a diameter that does not exceed 2.4 mm. Using
line other than that specied may cause the brush cutter
to overheat or become damaged.
WARNING: Never use metal-reinforced line, wire,
or rope, etc. These can break off and become dangerous
projectiles.
1. Remove the battery pack.
2. Remove the remaining cutting line, if necessary.
3. Cut 4m of cutting line, and insert the line into the

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E14
EN
mounting hole inside the eyelet (Fig. W1). Push and
pull the line from the other side until equal amounts
of line appear on both sides of the spool (Fig. W2).
4. Press, while rotating the lower cover assembly in the
arrow direction, to wind the line onto the spool until
approximately 14cm of line is showing on each side
(Fig. W3).
5. Push the lower cover assembly down while pulling on
the lines to manually advance the line and to check
for proper assembly of the trimmer head.
When the cutting line breaks from the line outlet or the
cutting line is not released when tapping the trimmer
head, follow the steps below:
1. Remove the battery pack.
2. Press the release tabs on the upper cover and
remove the lower cover assembly by pulling it
straight out (Fig. H1 & H2).
3. Remove the cutting line from the spool.
4. With one hand holding the upper cover, use the other
hand to grasp the lower cover assembly and align the
tabs on the upper cover with the holes in the lower cover
assembly (Fig. X); use your palm to press the lower cover
assembly until the tabs lock with the upper cover.
5. Reload the cutting line.
USING WITH 3-TEETH METAL
WARNING: To cut wild growth and scrub, lower the
rotating 3-teeth blade down onto the growth to achieve a
chopping effect. Use the brush cutter like a scythe (sweep
it to the right and left) at ground level. Do not use the
cutting unit above waist height.
WARNING: The higher the cutting unit is off the
ground, the greater the risk of injury from cuttings being
thrown sideways.
WARNING: When cutting young stands or other
woody materials up to 2cm in diameter, use the left
side of the blade to avoid blade thrust situations. Do not
attempt to cut woody material with a larger diameter,
since the blade may catch or jerk the brush cutter
forward. This may cause damage to the blade or the
brush cutter or loss of control of the brush cutter, resulting
personal injury.
WARNING: Improper use of a blade may cause it to
crack, chip, or shatter. Thrown parts may seriously injure
the operator or bystander. To reduce the risk of personal
injury, it is essential to take the following precautions:
◾Avoid contact with hard or solid foreign objects such as
stones, rocks or pieces of metal.
◾Never cut wood or shrubs with a stem diameter of
more than 2cm.
◾Inspect the blade at a regular short interval for signs of
damage. Do not continue working with a damaged blade.
◾Re-sharpen the blade regularly (when it has dulled
noticeably) and have it balanced if necessary
(performed by a qualied service technician).
Blade Thrust
Exercise extreme caution when using the 3-teeth blade
with this unit. Blade thrust is the reaction that may occur
when the spinning blade contacts anything it cannot cut.
This contact may cause the blade to stop for an instant
and suddenly “thrust” the unit away from the object that
was hit. This reaction can be violent enough to cause the
operator to lose control of the unit. Blade thrust can occur
without warning if the blade snags, stalls, or binds. This is
more likely to occur in areas where it is difficult to see the
material being cut. For cutting ease and safety, approach
the weeds being cut with the brush cutter from the right
to the left. In the event an unexpected object or woody
stock is encountered, this practice could minimize the
blade thrust reaction.
MAINTENANCE
WARNING: Before inspecting, cleaning or servicing
the unit, stop the motor, wait for all moving parts to stop,
and remove the battery pack. Failure to follow these
instructions can result in serious personal injury or
property damage.
WARNING: When servicing, use only identical
replacement parts. Use of any other parts may create a
hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualied
service technician.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean clothes to remove dirt, dust, oil, grease, etc.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 15
EN
CLEAN THE MACHINE
◾After each use of 3-teeth blade / trimmer head, clean
the debris, clogged soils or grass on the blade and
guard with a soft brush.
NOTICE: When the line-cutting blade becomes dull,
please sharpen it performed by a qualied service
technician or replace with a new line-cutting blade as
necessary.
◾After each use of brush cutter, clean the cutting unit
using a damp cloth with a mild detergent.
◾Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by certain
aromatic oils, such as pine and lemon, and by solvents
such as kerosene. Moisture can also cause a shock
hazard. Wipe off any moisture with a soft dry cloth.
◾Use a small brush or a small vacuum cleaner to clean
the air vents on the rear housing.
STORING THE MACHINE
◾Remove the battery pack from the tool.
◾Wear heavy gloves to clean the tool thoroughly.
◾Mount the blade sheath onto the 3-teeth blade for safe
saving (Fig. Y).
◾Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the machine on or adjacent to fertilizers, gasoline, or
other chemicals.
Protecting the environment
Do not dispose of electrical equipment,
battery charger and batteries/
rechargeable batteries into household
waste!
According to the European law
2012/19/ EU, electrical and electronic
equipment that is no longer usable, and
according to the European law 2006/66/EC,
defective or used battery packs/batteries,
must be collected separately.
If electrical appliances are disposed of in
landfills or dumps, hazardous substances
can leak into the groundwater and get into
the food chain, damaging your health and
well-being.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E16
EN
TROUBLESHOOTING
PROBLEM CAUSE SOLUTION SOLUTION
Fail to start.
◾The battery pack is not attached to the
brush cutter. ◾Attach the battery pack to the power head.
◾No electrical contact between the brush
cutter and the battery pack. ◾Remove battery, check contacts and reinstall the battery pack until it
snaps into place.
◾The battery pack is depleted. ◾Charge the battery pack with EGO
chargers listed in this manual.
◾The lock-off lever and trigger are not
depressed simultaneously. ◾Press down the lock-off lever and hold it, then depress the trigger to
turn on the brush cutter.
Stop working.
◾The motor is overloaded. ◾The motor will recover when the
load is removed. For continuous
working, decrease the load on the
power head.
◾Heavy cutting line is used. ◾Use standard nylon cutting line with
diameter no more than 2.4mm.
◾The battery pack or the brush cutter is too
hot. ◾Allow the battery pack or the power head to cool until the temperature
drops below 67°C.
◾The battery pack is disconnected from the
tool. ◾Re-install the battery pack.
◾The battery pack is depleted. ◾Charge the battery pack with EGO
chargers listed in this manual.

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E 17
EN
PROBLEM CAUSE SOLUTION SOLUTION
Trimmer head will not
advance line (only
using with trimmer
head).
◾The motor shaft or trimmer head is bound
with grass. ◾Stop the machine, remove the battery and remove the grass from
the motor shaft and trimmer head.
◾There is not enough line on the spool. ◾Remove the battery and replace the
cutting line, follow the section “LINE
REPLACEMENT” in this manual.
◾The trimmer head is dirty. ◾Remove the battery and clean the
spool, lower cover assembly and
upper cover.
◾Line is tangled on spool. ◾Remove the battery, remove the line
from the spool and rewind, follow
the section “LINE REPLACEMENT” in
this manual.
◾The line is too short. ◾Remove the battery and pull the
lines while alternately pressing
down on and releasing the bumb
knob.
WARRANTY
EGO WARRANTY POLICY
Please visit the website egopowerplus.com for full terms and conditions of the EGO Warranty policy.

18 56 VOLT LITHIUM-IONEN-GESTRÜPPSCHNEIDER MIT HECKMOTOR UND LENKERGRIFF — BC3800E
DE
LESEN SIE ALLE ANWEISUNGEN
LESEN SIE DIE BEDIENUNGSANLEITUNG
Restrisiko! Menschen mit elektronischen
Geräten, wie z.B. Herzschrittmachern, sollten ihren Arzt
konsultieren, bevor sie dieses Gerät verwenden. Die
Bedienung von Elektrogeräten in unmittelbarer Nähe zu
Herzschrittmachern kann zu Interferenzen und Störungen
des Schrittmachers führen.
WARNUNG: Um die Sicherheit und Zuverlässigkeit
zu gewährleisten, sollten alle Reparaturen und
der Austausch von Teilen nur von qualizierten
Servicetechnikern durchgeführt werden.
SICHERHEITSSYMBOLE
Der Zweck von Warnsymbolen besteht darin, Ihre
Aufmerksamkeit auf mögliche Gefahren zu lenken. Die
Warnsymbole und deren Erklärungen verdienen Ihre vollste
Aufmerksamkeit und Beachtung. Durch die Warnsymbole
allein sind die Gefahren noch nicht ausgeschaltet. Die
Anweisungen und Warnhinweise stellen keinen Ersatz für
angemessene Unfallverhütungsmaßnahmen dar.
WARNUNG: Vor der Benutzung dieses
Werkzeugs sollten alle Sicherheitshinweise in dieser
Bedienungsanleitung gelesen und bekannt sein. Das gilt
auch für sämtliche Warnsymbole, die auf „GEFAHR“,
„WARNUNG“, und „VORSICHT“ hinweisen. Die
Nichtbeachtung auch nur einer der unten aufgeführten
Anweisungen kann zu Stromschlägen, Feuer und/oder
schweren Verletzungen führen.
SYMBOLBEDEUTUNG
SICHERHEITSWARNSYMBOL: Bedeutet GEFAHR,
WARNUNG oder Vorsicht, kann zusammen mit anderen
Symbolen oder Symbolen benutzt werden.
WARNUNG: Die Bedienung von
Elektrogeräten kann dazu führen, dass
Fremdkörper in Ihre Augen geschleudert
werden und Sie dadurch schwerwiegende
Augenschäden davontragen. Tragen Sie
immer eine Schutzbrille, wenn möglich mit
Seitenschutz, oder, falls nötig, einen vollen
Gesichtsschutz, bevor Sie Arbeiten mit
dem Elektrowerkzeug verrichten. Wir
empfehlen Ihnen, einen Gesichtsschutz
über Ihrer eigenen Brille oder eine
herkömmliche Schutzbrille mit
Seitenschutz zu tragen.
SICHERHEITSHINWEISE
Auf dieser Seite werden die Warnsymbole vorgestellt
und beschrieben, die sich unter Umständen am Gerät
befinden. Lesen, verinnerlichen und befolgen Sie alle
Anleitungen am Gerät, bevor Sie versuchen, das Gerät
zusammenzubauen und zu bedienen.
Sicherhe-
itswarnung
Weist auf mögliche
Verletzungsgefahr hin.
Lesen sie alle
anweisungen!
Um das Verletzungsrisiko
zu verringern, muss
der Benutzer die
Bedienungsanleitung
vor der Verwendung des
Gerätes gelesen und
verstanden haben.
Augenschutz
tragen
Tragen Sie immer eine
Schutzbrille, möglichst
mit Seitenschutz, und
einen Gesichtsschutz,
wenn Sie das Gerät
bedienen.
Tragen
Sie einen
Gehörschutz.
Tragen Sie immer einen
Lärmschutz (Ohrenstöpsel
oder Kapselgehörschutz),
um Ihr Gehör zu schützen.
Kopfschutz
tragen
Tragen Sie einen
geprüften Helm, um Ihren
Kopf zu schützen.
Schutzh-
andschuhe
tragen
Schützen Sie Ihre Hände
mit Handschuhen,
wenn Sie das
Gestrüppmesser oder die
Messerschutzabdeckung
anfassen. Robuste,
rutschfeste Handschuhe
verbessern Ihre
Griffsicherheit und
schützen Ihre Hände.
Schutzsc-
huhe tragen
Tragen Sie beim
Gebrauch dieses
Gerätes rutschfeste
Sicherheitsschuhe.
Vorsicht
- Rücksch-
laggefahr
Warnen Sie den Benutzer
vor der Rückschlaggefahr.
Übersetzung der Originalanleitungen

1956 VOLT LITHIUM-IONEN-GESTRÜPPSCHNEIDER MIT HECKMOTOR UND LENKERGRIFF — BC3800E
DE
Querschläger
und Unbefugte
Personen
fernhalten
Herumgeschleuderte
Objekte können abprallen
und Verletzungen
oder Sachschäden
verursachen. Stellen
Sie bei Betrieb sicher,
dass andere Personen
und Haustiere sich von
dem Gestrüppschneider
fernhalten.
15m
Unbefugte
Personen
fernhalten
Stellen Sie bei Betrieb
sicher, dass andere
Personen und Haustiere
mindestens 15 m von
dem Rasentrimmer
entfernt sind.
Kein rundes
Messer
Keine runden Messer
installieren.
Vor Regen
schützen
Nicht im Regen
verwenden oder bei
Regen im Freien liegen
lassen.
CE
Dieses Produkt erfüllt
die anwendbaren EG-
Richtlinien.
WEEE
Elektro- und Elektronik-
Altgeräte dürfen nicht
im Hausmüll entsorgt
werden. Bringen
Sie das Gerät zu
einem zugelassenen
Recyclinghof.
XX
Geräusch
Garantierter
Schallleistungspegel
Geräuschemission
an die Umgebung
gemäß Richtlinie
der Europäischen
Gemeinschaft
V Volt Spannung
Gleichstrom Stromart oder Merkmal
des Stroms
n0
Leerlau-
fdrehzahl Drehzahl im Leerlauf
... /min pro Minute Umdrehungen pro Minute
ALLGEMEINE SICHERHEITSHINWEISE ZU
ELEKTROWERKZEUGEN
WARNUNG: Lesen Sie alle Sicherheitshinweise,
Anweisungen, Abbildungen und Spezikationen,
die mit diesem Elektrowerkzeug geliefert werden.
Die Nichtbeachtung der unten aufgeführten Anleitungen
kann zu Stromschlägen, Feuer und/oder schweren
Verletzungen führen.
Bewahren Sie alle Warn- und Bedienhinweise für
Nachschlagezwecke auf.
Unter den Begriff „Elektrowerkzeug“ in den
Warnhinweisen fallen Ihre netzbetriebenen (d. h.
schnurgebundenen) oder akkubetriebenen (d.h.
schnurlosen) Elektrowerkzeuge.
SICHERHEIT IM ARBEITSBEREICH
◾Halten Sie den Arbeitsbereich stets sauber und gut
beleuchtet. Nicht aufgeräumte oder dunkle Bereiche
können Unfälle provozieren.
◾Verwenden Sie das Elektrowerkzeug nicht in
explosionsgefährdeten Umgebungen wie z. B. in
Gegenwart von entzündlichen Flüssigkeiten, Gasen
oder Staub. Elektrowerkzeuge erzeugen Funken, die
Staub oder Dämpfe entzünden können.
◾Halten Sie Schaulustige und Kinder beim Arbeiten mit
dem Elektrowerkzeug fern. Ablenkungen können dazu
führen, dass Sie die Kontrolle verlieren.
PERSONENSICHERHEIT
◾Seien Sie wachsam, geben Sie darauf Acht,
was Sie tun, und benutzen Sie Ihren gesunden
Menschenverstand, wenn Sie das Elektrowerkzeug
verwenden. Betreiben Sie das Gerät nicht, wenn
Sie müde sind oder unter dem Einuss von Drogen,
Alkohol oder Medikamenten stehen. Ein Moment der
Unachtsamkeit kann zu ernsthaften Verletzungen führen.
◾Tragen Sie eine persönliche Schutzausrüstung.
Tragen Sie immer einen Augenschutz. Durch
eine für die jeweiligen Bedingungen geeignete
Schutzausrüstung wie etwa eine Staubschutzmaske,
rutschfeste Schuhe, Helm oder Gehörschutz lässt sich
die Verletzungsgefahr verringern.
◾Ungewollten Motorstart verhindern. Vor dem
Anschließen an eine Steckdose und/oder einen
Akku und vor dem Aufheben oder Transportieren
des Werkzeugs immer kontrollieren, ob der
Betriebsschalter ausgestellt ist.Unfälle sind
vorprogrammiert, wenn Sie Elektrowerkzeuge
mit einem Finger am Netzschalter tragen oder
Elektrowerkzeuge mit eingeschaltetem Netzschalter an
eine Steckdose anschließen.

20 56 VOLT LITHIUM-IONEN-GESTRÜPPSCHNEIDER MIT HECKMOTOR UND LENKERGRIFF — BC3800E
DE
◾Entfernen Sie alle Einstellschlüssel oder
Schraubenschlüssel, bevor Sie das Elektrowerkzeug
einschalten. Ein Schraubenschlüssel oder ein Schlüssel,
der noch an einem beweglichen Teil des Elektrowerkzeuges
befestigt ist, kann zu Verletzungen führen.
◾Nicht überstrecken.Achten Sie stets auf einen
festen Stand und halten Sie das Gleichgewicht.
Dies ermöglicht eine bessere Kontrolle über das
Elektrowerkzeug in unerwarteten Situationen.
◾Tragen Sie angemessene Kleidung. Tragen Sie keine
weite Kleidung oder Schmuck. Halten Sie Ihr Haar,
Ihre Kleidung und Handschuhe von den beweglichen
Teilen fern. Weite Kleidung, Schmuck oder langes Haar
können sich in den beweglichen Teilen verfangen.
◾Wenn Komponenten zum Anschluss an eine
Absauganlage und an Auffangvorrichtungen
mitgeliefert werden, achten Sie darauf, dass diese
ordnungsgemäß befestigt und benutzt werden. Durch
eine Staubabsaugvorrichtung lassen sich Gefahrenquellen
durch Staub ausschalten.
◾Lassen Sie sich nicht durch die aufgrund häuger
Benutzung entstandene Vertrautheit mit Werkzeugen
dazu verleiten, unachtsam zu werden und die für
Werkzeuge geltenden Sicherheitsgrundsätze zu
ignorieren. Eine fahrlässige Handlung kann bereits im
Bruchteil einer Sekunde zu schweren Verletzungen führen.
GEBRAUCH UND PFLEGE DES ELEKTROWERKZEUGS
◾Üben Sie keinen übermäßigen Druck auf das
Elektrowerkzeug aus. Verwenden Sie geeignetes
Elektrowerkzeug für die jeweiligen Arbeiten.Durch
das passende Elektrowerkzeug lassen sich die Arbeiten
besser und sicherer in dem jeweils vorgesehenen
Tempo erledigen.
◾Verwenden Sie das Elektrowerkzeug nicht, wenn
sich der Schalter nicht ein- und ausschalten lässt.
Ein Elektrowerkzeug, das sich über den Schalter nicht
betätigen lässt, ist gefährlich und muss repariert werden.
◾Bewahren Sie nicht benutzte Elektrowerkzeuge
außerhalb der Reichweite von Kindern auf und
verbieten Sie Personen die Gerätebenutzung, die
das Elektrowerkzeug oder diese Anweisungen
nicht kennen. In den Händen ungeübter Benutzer
stellen Elektrowerkzeuge eine große Gefahr dar.
◾Warten Sie Elektrowerkzeuge und Zubehörteile.
Achten Sie auf falsch ausgerichtete oder fest
sitzende Bauteile, Bruchstellen und sonstige
Umstände, die die Funktion des Elektrowerkzeuges
beeinträchtigen können. Lassen Sie beschädigte
Elektrowerkzeuge reparieren, bevor Sie sie wieder
einsetzen. Viele Unfälle entstehen durch schlecht
gewartete Elektrowerkzeuge.
◾Halten Sie Schneidwerkzeuge scharf und sauber.
Sachgemäß gewartete Schneidwerkzeuge mit scharfen
Schneiden neigen weniger zum Festfahren und sind
leichter zu kontrollieren.
◾Benutzen Sie das Elektrowerkzeug,
Zubehör, Werkzeugteile usw. gemäß diesen
Anweisungen und berücksichtigen Sie dabei die
Arbeitsbedingungen und die auszuführende Arbeit.
Die Verwendung des Elektrowerkzeugs für Aufgaben,
die von seinem bestimmungsgemäßen Zweck
abweichen, können zu gefährlichen Situationen führen.
◾Halten Sie die Griffe und Griffäche trocken,
sauber und frei von Öl und Fett. Rutschige Griffe und
Griffächen beeinträchtigen die sichere Handhabung
des Werkzeugs und führen in unerwarteten Situationen
zum Verlust der Kontrolle über das Werkzeug.
◾Halten Sie Kabel vom Arbeitsbereich des
Werkzeugs fern. Während der Arbeiten können Kabel
verdeckt oder verborgen sein und versehentlich von
dem Werkzeug beschädigt werden.
BENUTZUNG UND PFLEGE VON AKKUWERKZEUGEN
◾Laden Sie den Akku nur mit dem vom Hersteller
angegebenen Ladegerät auf. Ein Ladegerät, das für
einen bestimmten Akkutyp geeignet ist, kann bei der
Benutzung eines anderen Akkus zu einer Brandgefahr
werden.
◾Benutzen Sie für die Elektrowerkzeuge nur die
jeweils zugehörigen Akkus. Durch die Verwendung
anderer Akkus besteht Verletzungs- und Brandgefahr.
◾Wenn der Akku nicht benutzt wird, halten
Sie ihn von anderen metallischen Objekten
fern, wie Büroklammern, Münzen, Schlüssel,
Nägel, Schrauben oder anderen kleinen
Metallgegenständen, die eine Verbindung
zwischen den Batteriekontakten herstellen
können. Das Kurzschließen der Batteriekontakte kann
Verbrennungen oder Brände verursachen.
◾Bei unsachgemäßer Anwendung kann Flüssigkeit
aus dem Akku austreten; Kontakt vermeiden.
Bei versehentlichem Kontakt sofort mit Wasser
spülen. Falls Flüssigkeit in die Augen geraten ist,
suchen Sie außerdem einen Arzt auf. Aus dem
Akku austretende Flüssigkeit kann Reizungen oder
Verbrennungen verursachen.
◾Benutzen Sie keinen Akku oder ein Werkzeug, das
beschädigt oder umgebaut wurde. Beschädigte
oder umgebaute Akkus können sich unvorhergesehen
verhalten, wodurch möglicherweise ein Brand, eine
Explosion oder Verletzungen verursacht werden.