Electrolux ESV09CRS-B2 User manual

EN AIR CONDITIONER INSTALLATION MANUAL 2
ESM09CRR-B3
ESM12CRR-B3
ESM18CRR-B3
ESV09CRS-B2
ESV12CRS-B2
ESV09CRR-C6
ESV09CRR-C7

WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings
with it decades of professional experience and innovation. Ingenious and stylish, it has been
designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you’ll get great results every time.
Welcome to Electrolux.
Visit our website to:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com
Register your product for better service:
www.electrolux.com/productregistration
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
We recommend the use of original spare parts.
When contacting Service, ensure that you have the following data available.
The information can be found on the rating plate. Model, PNC, Serial Number
Warning / Caution-Safety information.
General information and tips
Environmental information.
Subject to change without notice.
2 www.electrolux.com
CONTENTS
1. SAFETY INSTRUCTIONS .................................................................................... 3
2. BEFORE INSTALLATION ..................................................................................... 5
3. PRODUCT INSTALLATION .................................................................................. 8
4. TEST AND RUNNING........................................................................................ 19
5. APPENDIX......................................................................................................... 21

3ENGLISH
1. SAFETY INSTRUCTIONS
Before the installation and use of the
appliance, carefully read the supplied
instructions. The manufacturer is not
responsible if an incorrect installation and
use causes injuries and damages. Always
keep the instructions with the appliance
for future reference.
1.1 Children and vulnerable
people safety
WARNING!
Risk of suffocation, injury or
permanent disability.
• This appliance can be used by
children aged from 8 years and above
and persons with reduced physical,
sensory or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved.
• Children shall not play with the
appliance.
• Cleaning and user maintenance shall
not be made by children without
supervision.
1.2 Installation and Use
WARNING!
Risk of suffocation, injury or
permanent disability.
• Contact an authorised installer for
installation of this unit.
• Contact an authorised service
technician for repair or maintenance of
this unit.
• The socket outlet required to supply
power must be connected and
commissioned by a licenced contractor.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualied
persons in order to avoid a hazard.
• Installation work must be performed
in accordance with the national wiring
standards and the electricity suppliers
service rules by authorised personnel
only.
• If the unit is to be moved to another
location or disposed of, only a suitably
qualied person is permitted to
undertake such work.
• If you notice an unusal situation, such
as a burning smell, please switch off
the power to the air conditioner and
contact the brand service agent. If
this abnormal status continues the air
conditioner may be damaged or even
cause electric shock or re.
• Do not operate the air conditioner with
wet hands. This may cause electric
shock.
• Do not damage or cut off the power
cord or other wires. If this occurs,
please have it repaired or replaced by
an accredited technician.
• Do not connect this air conditioner to a
multi outlet power board.
• Please switch off the power supply to
the air conditioner if it is not to be used
for an extended period. Otherwise, it
will accumulate dust and may cause a
re.
• Before cleaning the air conditioner,
please disconnect the power supply
in order to eliminate the possibility of
electric shock.
• The power supply should be matched
with the air conditioner. Air conditioners
provided with a supply cord should
be connected directly to a power
outlet with a suitable safety switch. Air
conditioners that are hard wired must
be connected to a suitable safety circuit
breaker.
• Please ensure that the power supply
to the air conditioner is stable and
meets the requirements set out in the
installation manual.
• Always ensure the product is installed
with appropriate earthing.

4 www.electrolux.com
R32 refrigerant warning
This product uses R32 diuoromethane refrigerant, which is a mildly ammable gas
class 2.2 according to ISO 5149 and must be handled by a refrigeration mechanic with
appropriate refrigerant handling licence.
1.3 Minimum Floor Areas
This product uses mildly ammable R32 refrigerant. Certain levels of refrigerant require
minimum room sizes. Please ensure that these minimum room sizes are adhered to for
standard installations.
Type
R32 0.306
1.224 1.836 2.448 3.672 4.896 6.12 7.956
29 51 116 206 321 543
10 19 42 74 116 196
3613 23 36 60
24915 24 40
0.6
1.0
1.8
2.2
LFL
kg/m3
Total Mass Charged/kg
Mimimum room area/m2
hv
m
• For safety, be sure to turn off the
circuit breaker before performing any
maintenance or cleaning or when the
product is not used for an extended
period of time. Accumulated dust may
cause re or electric shock.
• Select the most appropriate
temperature. It can save electricity.
• Do not keep windows and doors open
for a long time during operation. It will
result in insufcient performance.
• Do not block the air inlet or outlet. It will
result in insufcient performance and
cause malfunctions.
• Keep combustible materials away from
the units at least 1meter. It may cause
re.
• Do not step on the top of the outdoor
unit or place heavy things on it. It may
cause damage or injury.
• Do not attempt to repair the air conditioner
by yourself. Incorrect repairs may cause
electric shock or re. Please contact your
local authorised service centre.
• Do not insert your hands or objects into
the air inlet or outlet. It may cause injury.
• Do not expose animals or plants directly
to the airow.
• Do not use the unit for any other
purpose, such as preserving food or
drying clothes.
• Do not splash water on the air conditioner.
It may cause electric shock or malfunction.
Symbol Note Explanation
WARNING
CAUTION
CAUTION
CAUTION
This symbol shows that this appliance uses a flammable
refrigerant. If the refrigerant is leaked and exposed to an
external ignition source, there is a risk of fire.
This symbol shows that the operation manual should be read
carefully.
This symbol shows that a service personnel should be handling
this equipment with reference to the installation manual.
This symbol shows that information is available such as the
operating manual or installation manual.

5ENGLISH
2. BEFORE INSTALLATION
2.1 Tools needs for installation
1. Level gauge
2. Screw driver
3. Electric drill
4. Hole core drill
5. Flaring tool set
6. Specied torque wrenches
7. Spanner (half union)
8. A glass of water
9. Hexagonal wrench
10. Gas-leak detector
11. Vacuum pump
12. Gauge manifold
13. Pipe expander
14. Multimeter
15. Pipe cutter
16. Measuring tape
17. Other tools
2.2 Accessories
Number Name of Accessories Quantity
1Indoor unit mounting plate 1
2Clip anchor Varies by models
3Self-tapping screws (for mounting plate) Varies by models
4Remote controller 1
5Remote controller Holder / Screws Optional
6Battery (AAA 1.5V) 2
7Piping hole cover Optional
8Pipe insulation belt 1
9Refrigerant piping (Liquid/Gas pipe) Optional
10 Signal cable Optional
11 Drain hose 1
12 Cushion Optional
13 Drain connector (Heat Pump model only) Optional
14 Drain plug (Heat Pump model only) Optional
15 Flare nut (for gas pipe) Optional
16 Flare nut (for liquid pipe) Optional
17 Handle screw (for outdoor unit) Optional
18 Wall mud Optional
19 Magnetic ring Optional
20 Healthy filter** (Packed in the plastic bag) Varies by models
Note:
The accessory parts may vary from each model, please refer to the actual parts.
Other necessary parts for the installation, besides the above mentioned, must be
provided by the customer/installer.
** Please install the Healthy lter like Active carbon lter, Bio-Hepa lter, Vitamin C lter,
Silver ion lter or any other lters with the dust lter in the indoor unit. For some models,
we already have the Healthy lters installed in the indoor unit.

6 www.electrolux.com6 www.electrolux.com
2.3 Product Description
NOTE
All the pictures in this manual are for explanation purposes only. The actual
shape of the indoor unit you purchased may be slight different on front panel
and display window.The actual shape shall prevail.
≥15cm
≥15cm
Space to the wall
Space to obstruction
≥30cm
≥2m
Air outlet side
Air inlet side
≥50cm
Space to the wall
Space to the ceiling
≥15cm
Space to the wall
≥3m
Air outlet side
Space to the wall
≥50cm
1 23
4
20
5
6
13
14
15
16
11
7
10
9
8
17
18
19 12
≥30cm

7ENGLISH
2.4 Installation site
• Do not install the unit in areas with:
– strong heat sources;
– vapours or ammable gases;
– contamination with oil particles;
– high frequency electromagnetic
equipment (e.g. welding equipment
or medical devices);
– high salinity (e.g. close to coastal
areas);
– sulphuric gas (e.g hot water springs);
– poor air quality.
Indoor unit
• Maintain the minimum installation
distances specied in this document.
Do not block the air inlet or the air
outlet.
• Do not use the unit in places with
extremely high humidity.
• Install the indoor unit out of reach of
children.
• The wall must be strong enough to
support the weight and vibration of the
unit.
• Install the indoor unit at least 230 cm
above the oor surface.
• Leave sufcient space for cleaning and
maintenance.
• The air lter should remain accessible.
• Leave at least 1 m distance between
the unit and other electrical appliances.
• Install the indoor unit in a place where
the condensate water can be easily
drained.
• Install at a location protected from
direct sunlight.
Outdoor unit
• Maintain the minimum installation
distances specied in this document.
• Do not block the air inlet or the air
outlet.
• Install the outdoor unit out of reach of
children.
• Install the outdoor unit where there is
sufcient ventilation.
• Install the outdoor unit where produced
noise and airow will not disturb
neighbors or animals.
• Install the outdoor unit in a dry place.
• Install the outdoor unit in a place not
exposed to direct sunlight or strong
wind.
• Install the outdoor unit in a place can
support the weight and vibration of the
unit.
• Leave sufcient space for cleaning and
maintenance.
Safety precautions for electrical appliances
• Use a dedicated mains circuit.
• The unit must be properly grounded.
• Install a Residual-current device (RCD)
to protect against personal injury in
case of leakage currents.
• The installation must comply with local
electrical safety regulations and with
other relevant local regulations.
• The unit must be installed in
accordance with national wiring
regulations.
• Do not subject the mains cable to force.
• The distance between the unit and heat
sources is at least 1.5 m.
NOTE
• Make sure that the live wire, the neutral
wire and the ground wire in the mains
socket are properly connected.
• Inadequate or incorrect electrical
connections can cause electric shock
or re.

8 www.electrolux.com
3.1 Indoor unit installation
3.1.1 Installing the Wall Mounting
Plate
1. Install the wall mounting plate
horizontally over the structural parts on
the wall using the spaces indicated on
the plate, as shown in Fig.3.1.1.
2. In the case of tiled, concrete or
similar walls, create 5mm diameter
holes. Place anchor supports for the
appropriate assembly screws.
3. Install the wall mounting plate to the
wall with screws.
Fig.3.1.1
NOTE:
• Fit the wall mounting plate and drill
holes in the wall according to the wall
structure and corresponding mounting
points on the wall mounting plate.
• Refer to Appendix(1) for type details
about the mounting plates.
3.1.2 Drilling the Hole
1. Determine the position of the hole for
the pipes using the wall mounting plate
and drill the pipe hole so that it is tilted
slightly downward.
2. Always use a pipe cover with an
opening when drilling.
Fig.3.1.2
5-7mm
Wall
Indoor Outdoor
3.1.3 Connective pipe
1. For the left-hand and right-hand piping,
remove the pipe cover from the side
panel. The pipe cover can be kept as
it may be used when relocating the air
conditioner to any other place.
2. For the rear-right-hand and rear-left-
hand piping, install the piping as shown
in Fig.3.1.3-1. Bend the connective
pipe to be laid at a height of 43mm or
less from the wall. Fix the end of the
connective pipe.
Fig.3.1.3-1
Fig.3.1.3-2
3.1.4 Drainage
1. Run the drain hose sloping downward.
Do not install the drain hose as
illustrated in Fig.3.1.4.
Fig.3.1.4
Do not block water ow by a rise or
put the end of drain hose into water.
Indoor Unit
Outline
Connective Pipe
43mm
Pipe Cover
(right)
Right
Piping
Rear Right
Piping
Rear Left
Piping
Pipe Cover
(left)
Pipe Holder
3. PRODUCT INSTALLATION

9ENGLISH
2. When connecting extension drain
hose, insulate the connecting part of
extension drain hose with a shield pipe,
do not let the drain hose slack.
3.1.5 Fastening the Indoor Unit
1. Pass the piping through the hole in the
wall.
2. Put the upper claw at the back of the
indoor unit on the upper hook of the
wall mounting plate, move the indoor
unit from side to side to see that it is
securely hooked.
Fig.3.1.5-1
3. Piping can easily be made by lifting the
indoor unit with a cushioning material
between the indoor unit and the wall.
Fig.3.1.5-2
4. Push the lower part of the indoor unit
up on the wall, Then move the indoor
unit from side to side, up and down to
check if it is hooked securely.
3.1.6 Piping and wrapping
1. Bundle the tubing, connecting cable,
and drain hose with tape securely and
evenly as shown in the Fig.3.1.6.
2. Because the condensed water from
rear of the indoor unit is gathered in
ponding box and is piped out of room,
do not put anything else in the box.
Fig.3.1.6
NOTE:
• Connect the indoor unit rst, then the
outdoor unit.
• Be careful not to let the drain hose
slack.
• Both of the auxiliary piping should be
heat insulated.
• Be sure that the drain hose is located at
the lowest side of the bundle. Locating
at the upper side may cause drainage
overow inside the unit.
• Never intercross nor intertwist the
power wire with any other wire.
• Run the drain hose sloped downward
to drain out the condensed water
smoothly.
3.2 Outdoor unit installation
3.2.1 Securing of Outdoor Unit
1. Install the outdoor part of the unit on
a at surface to avoid excess noise
and vibration. A condenser pad is
recommended.
2. Direct the air vent toward an area
Upper Hook
Cable
Connection
Ponding
Box
Pipe
Room
Connective
Pipe
Wrapping
Belt
Drain
Hose
Lower Hook
Cushioning material

10 www.electrolux.com
without obstacles.
3. Install the unit at the site where it is
exposed to as little wind as possible,
especially not in areas where it is
frequently windy.
4. If the installation site is exposed to
heavy winds, such as in coastal areas,
place the unit along the widest part of
the wall or use protective plates.
5. Be sure there is no obstacle which
blocks exhausting air, including shrubs
or bushes.
Fig.3.2.1-1
NOTE:
• Settlement of outdoor unit. Anchor the
outdoor unit tightly and horizontally on
a concrete or at mount with a bolt
and nut 10mm diameter (Purchased
separately).
Fig.3.2.1-2
3.2.2 Condensate drainage of
outdoor unit (only for heat pump
model)
1. During heating operation, the
condensate and defrosting water
should be drained out reliably through
the drain hose.
2. Install the outdoor drain connector in
the drain-water hole on the chassis of
outdoor unit, and attach the drain hose
to the connector so that the waste
water formed in the outdoor unit can be
drained out.
3. The drain-water hole must be plugged.
Whether to plug other holes will be
determined by the installer according to
actual conditions.
4. In case of a drain hose, the unit must
be installed on a base more than 3cm
height.
Fig.3.2.2
NOTE:
• For some heat pump models, no drain
connecter provided due to enough
drain-water hole designed.
3.3 Refrigerant piping
connection
NOTE:
• Keep original bend so no kinking of the
tube occurs.
Strong Wind
Drain-water
hole
Drain
connecter
Hose
(not provided)
Chassis
Air Inlet
Air Inlet
Air Outlet