Electrolux EXP09CKEWI User manual

EN AIR CONDITIONER
FR CLIMATISEUR
IT CONDIZIONATORE
NL AIR CONDITIONER
DE KLIMAGERÄT
PL KLIMATYZACJA
CZ KLIMATIZAČNÍ ZAŘÍZENÍ
EXP09CKEWI
EXP11CKEWI
USER MANUAL
MODE D'EMPLOI
MANUALE DELL’UTENTE
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
INSTRUKCJA OBSŁUGI
UŽIVATELSKÁ PŘÍRUČKA
2
24
46
68
90
112
134

2
www.electrolux.com
WE’RE THINKING OF YOU
CUSTOMER CARE AND SERVICE
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that brings with
it decades of professional experience and innovation. Ingenious and stylish, it has been
designed with you in mind. So whenever you use it, you can be safe in the knowledge that
you’ll get great results every time.
Welcome to Electrolux.
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the following data
available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Subject to change without notice.
Warning / Caution-Safety information.
General information and tips.
Environmental information.
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Visit our website to:
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CONTENTS
1. SAFETY INFORMATION ������������������������������������������������������������������������������������� 3
2. SAFETY INSTRUCTION ������������������������������������������������������������������������������������� 6
3. UNIT DESCRIPTION ����������������������������������������������������������������������������������� 10
4. ACCESSORIES INCLUDED ��������������������������������������������������������������������� 10
5. INSTALLATION INSTRUCTIONS ��������������������������������������������������������������������� 11
6. AIR CONDITIONER FEATURES ��������������������������������������������������������������������� 14
7. OPERATING INSTRUCTIONS ��������������������������������������������������������������������� 14
8. CARE & CLEANING ������������������������������������������������������������������������������������������� 20
9. TROUBLE SHOOTING ����������������������������������������������������������������������������������� 21
10. ENVIRONMENTAL CONCERNS ��������������������������������������������������������������������� 23

3
ENGLISH
1. SAFETY INFORMATION
WARNING!
•This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way
and understand the hazards involved�
•Children shall not play with the appliance�
•If the supply cord is damaged, it must bereplaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard�
CAUTION!
•Contact authorised service technician for repair or
maintenance of this unit�
•Contact the installer for installation of this unit�
•The air conditioner is not intended for use by young
children of inrmed persons without supervision�
•Young children should be supervised to ensure that they
do not play with the air conditioner�
•There are local council rules regarding maximum
allowable noise levels emitted by air conditioners�
•If the power cord is to be replaced, replacement work
shall be performed by authorised personnel only�
•Installation work must be performed in accordance with
the national wiring standards by authorised personnel
only(if applicable)� Incorrect connection can cause
overheating and re�
•Take care not to catch ngers on fan when adjusting
horizontal louvres�
•The fuse is 250V 3�15A�
•Cleaning and user maintenance shall not be made by
children without supervision�Be aware that refrigerants
may not contain an odour�
This manual explains the proper use of your new air
conditioner� Please read this manual carefully before using the
product� This manual should be kept in a safe place for handy
reference�

4
www.electrolux.com
1.2 Point to Keep in Mind When Using Your Air Conditioner
CAUTION!
Warnings for use
CAUTION!
Warning for power supply cord
•This power plug must only be plugged into an
appropriate wall socket� Do not use in conjunction with
any extension cords�
•Push the power plug securely into the socket and make
sure it is not loose�
•Do not pull, deform� or modify the power supply cord,
or immerse it in water� Pulling or misuse of the power
supply cord can result in damage to the unit and cause
electrical shock�
•If the supply cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualied
•Do not modify any part of this product�
•Do not insert anything into any part of the unit�
•Ensure the power supply used has an appropriate
voltage rating� Only use a 220V - 240V, 50Hz, 10A
mains electricity supply� Use of a power supply with an
improper voltage rating can result in damage to the unit
an possibly re�
•Always use a circuit breaker or fuse with the proper amp
rating� Do not, under any circumstances, use wire, pins
or other objects in place of a proper fuse�
•In the event of any abnormality with the air conditioner
(eg� a burning smell), turn it off immediately and
disconnect the power supply�
1.1 Important notes
1� Do not operate unit without the air lter�
2� Do not operate unit near any heat source or open re�
3� Do not expose the unit to direct sunlight�
4� Always store or move the unit in an upright position�
5� Do not cover the appliance when in operation or
immediately after use�
6� Always drain condensate before storing unit�

5
ENGLISH
1.3 Usage cautions
(only for UK)
•This appliance is equipped with a cord that has a earthed
wire connected to an earthed pin� The plug must be plugged
into a socket that is properly installed and earthed� Do not
under any circumstances cut or remove the square earthed
pin from this plug�
•Be sure to turn the unit off and disconnect the power supply
cord before performing any maintenance or cleaning�
•Do not splash or pour water directly onto the unit�Water can
cause electrical shock or equipment damage�
•Drainage should be performed whenever moving the air
conditioner (see page 14)� If any water remains in the tank, it
may spill out while being moved�
•To ensure proper drainage, the drainage hose must have
no kinks and must not be elevated during dehumidicatioin
mode� If not, the drained water may spill out into the room�
•The temperature around the drainage hose must not be
below freezing point when used� Drained water may freeze
inside the hose, causing water inside the unit to overow into
the room�
•Do not block the exhaust air outlet with obstacles� Cooling
Plug
Grounding tab
Plug
Square earthed pin
person in order to avoid a hazard� Use only the manufacturer
specied power cord for replacement�
•This appliance must be earthed� This appliance is equipped
with a cord having an earth wire� The plug must be plugged
into an outlet that is properly installed and earthed�

6
www.electrolux.com
performance may be reduced or stop completely�
•Provide a residual current device (RCD) in order to protect
against electric shock in accordance with British Standard
and Wiring Rules�
•Exposure to direct airow for an extended period of time
could be hazardous to your health� Do not expose occupants,
pets, or plants to direct airow for extended periods of time�
•Do not use this air conditioner for non-specied special
purposes (e�g� preserving precision devices, food, pets,
plants, and art objects)� Usage in such a manner could harm
such property�
2. SAFETY INSTRUCTION
2.1 Notes on Operation
• Allow 3 minutes for the compressor
to restart cooling� If you turn the air
conditioner off and immediately restart
it, allow 3 minutes for the compressor
to restart cooling� There is an electronic
device in the unit that keeps the
compressor turned off for 3 minutes for
safety�
• In the event of a power failure during
use, allow 3 minutes before restarting
the unit� After power is reinstated,
restart the air conditioner� If the power
was off for less than three minutes,
be sure to wait at least three minutes
before restarting the unit� if you restart
the air conditioner within three minutes,
a protective device in the unit may
cause the compressor to shut off� This
protective device will prevent cooling for
about 5 minutes� Any previous setting
will be cancelled and the unit will return
to its initial setting�
• Low temperature operation: Is your
unit freezing up? Freezing may occur
when the unit is set close to 18°C in
low ambient temperature conditions,
especially at night� In these conditions, a
further temperature drop may cause the
unit to freeze� Setting the unit to a higher
temperature will prevent it from freezing�
• Dehumidication mode increases room
temperature� The unit generates heat
during dehumidication mode and the
room temperature will rise� Warm air will
be blown out from the exhaust air outlet,
but this is normal and does not indicate
a problem with the unit�
• This air conditioner blows the warm air
generated by the unit outside the room
via the exhaust hose while in cool mode�
In the mean time, the same amount
of air will enter the room from outside
through any openings of the room�
• Do not use means to accelerate the
defrosting process or to clean, other
than those recommended by the
manufacturer�
• The appliance shall be stored in a room
without continuously operating ignition
sources (for example: open ames, an
operating gas appliance or an operating
electric heater)�
• Do not pierce or burn�
• Compliance with national gas regulations
shall be observed�
• Keep ventilation openings clear of
obstruction�
• The appliance shall be stored in a well-
ventilated area where the room size
larger than 13 m2�

7
ENGLISH
2.2 Warning during usage
• Any person who is involved with
working on or breaking into a refrigerant
circuit should hold a current valid
certicate from an industry-accredited
assessment authority, which authorises
their competence to handle refrigerants
safely in accordance with an industry
recognised assessment specication�
• Servicing shall only be performed
as recommended by the equipment
manufacturer� Maintenance and repair
requiring the assistance of other skilled
personnel shall be carried out under the
supervision of the person competent in
the use of ammable refrigerants�
• This product contains a lithium button/
coin cell battery� If a new or used lithium
button/coin cell battery is swallowed
or enters the body, it can cause severe
internal burns and can lead to death in
as little as 2 hours� Always completely
secure the battery compartment� If
the battery compartment does not
close securely, stop using the product,
remove the batteries, and keep it away
from children� If you think batteries might
have been swallowed or placed inside
any part of the body, seek immediate
medical attention�
To prevent injury to the user or other
people and property damage, the following
instructions must be followed�
Incorrect operation due to ignoring
instructions may cause harm or damage�
The seriousness is classied by the
following indications:
This symbol indicates the possibility
of death or serious injury�
Warning during usage
This symbol indicates the possibility
of injury or damage to property�
WARNING!
WARNING!
CAUTION!
Meanings of symbols used in this manual
are shown below:
This symbol indicates never to do
this�
This symbol indicates always do
this�

8
www.electrolux.com
warning meaning
Plug in power plug properly Otherwise, it may cause electric shock or
re due to excess heat generation
Do not operate or stop the unit by inserting
or pulling out Die power plug It may cause electric shock or re due to heat generation
Do not damage or use an unspecied
power cord It may cause electric shook or re� If the power cord is damaged, it must
be replaced by the manufacturer or an
authorised service centre or a similarly
qualied person in order to avoid a hazard
Do not modify power cord length or share
the outlet with other appliances It may cause electric shock or re due to heat generation
Do not operate with wet hands or in damp
environment It may cause electric shock
Do not allow water to run into electric
parts It may cause failure of unit or electric shock
Always install circuit breaker and a
dedicated power circuit Incorrect installation may cause Are and electric shock
Unplug the unit if strange sounds, smell, or
smoke comes from it It may cause re and electric shock
Do not use the socket if it is loose or
damaged It may cause re and electric shock
Do not open the unit during operation It may cause re and electric shock
Keep rearms away It may cause re
Do not use the power cord close to
heating appliances It may cause re and electric shock
Do not use the power cord near ammable
gas or combustibles, such as gasoline,
benzene, thinner, etc�
It may cause an explosion or re
Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance
It may cause explosion, re and burns
Do not disassemble or modify unit It may cause failure and electric shock
Always ensure effective earthing Incorrect earthing may cause electric
shock
Do not direct airow at room occupants This could harm your health

9
ENGLISH
CAUTION!
caution meaning
When the air lter is to be removed, do not
touch the metal parts of the unit It may cause an injury
Do not clean the air conditioner with water Water may enter the unit and degrade the
insulation� It may cause an electric shock
Ventilate the room well when used
together with a stove, etc� An oxygen shortage may occur
When the unit is to be cleaned, switch off,
and turn off the circuit breaker Do not clean unit when power is on as it may cause re and electric shock, it may
cause an injury
Do not place a pet or house plant where it
will be exposed to direct air ow This could injure the pet or plant
Do not use for special purposes Do not use this air conditioner to
preserve precision devices, food, pets,
plants, and art objects� It may cause
deterioration of quality, etc�
Stop operation and close the window in
storm or cyclone Operation with windows opened may cause wetting of indoor and soaking of
household furniture
Hold the plug by the head of the power
plug when taking it out It may cause electric shock and damage
Turn off the main power switch when not
using the unit for a long time It may cause failure of product or re
Do not place obstacles around air-inlets or
inside of air-outlet It may cause failure of appliance or accident
Always insert the lters securely� Clean
lter once every two weeks Operation without lters may cause failure
Do not use strong detergent such as wax
or thinner - use a soft cloth Appearance may be deteriorated due to change of product colour or scratching of
its surface
Do not place heavy object on the power
cord and ensure that the cord is not
compressed
There is danger of re or electric shock
Do not drink water drained from air
conditioner It contains contaminants and could make you sick
Use caution when unpacking and installing Sharp edges could cause injury
If water enters the unit, turn the unit off
at the power outlet and switch off the
circuit breaker� Isolate supply by taking the
power-plug out and contact a qualied
service technician
It could cause electric shock and damage

10
www.electrolux.com
3
6
7
8
10
11
4 5
9
1
2
3. UNIT DESCRIPTION
• Check all the accessories are included in the package and please refer to the
installation instructions for their usage�
1
2
5
3
9
10
11
8
4
6
7
Remote control
Signal receiver
Carrying handle(both sides)
Room air outlet Bottom drain outlet
Air exhaust
Castor
Control panel
Power cable
Air intake
Continuous drain outlet
4. ACCESSORIES INCLUDED
1
2
3
4
8
5
9
6
10
7
11
PARTS PARTS NAME: QUANTITY:
Window kit connector A
Exhaust connector B
Window sliding kit
Exhaust hose
Foam seal A
Screws
Foam seal B
Safety lock
Remote control
1 pc
1 pc
1 set
1 pc
2 pcs
4 pcs 12�7 screws
2 pcs 19 screws
1 pc
1 pc
1 set
Bolts
Bettery
2 pcs
2 pcs

11
ENGLISH
5. INSTALLATION INSTRUCTIONS
5.1 Exhausting hot air
In the Cool Mode the appliance must be
placed close to a window or opening so
that the warm exhaust air can be ducted
outside� First position unit on a at oor
and make sure there’s a minimum of
30mm clearance around the unit, and is
within the vicinity of a single circuit outlet
power source�
1. Extend either side of the hose(Fig�1) and
screw the hose to connector A (Fig�2)�
3. Install the connector B into the unit
(Fig�4)�
3. Afx the connector A into the window
slider kit and seal� (Fig�5&6)
Fig. 4
2. Extend the other side of the hose and
screw it to connector B (Fig� 3)�
Fig.1
Lock
2
Slide onto
1
The hose can be extended from
its original length of 38cm up to
150cm, but it is the best to keep
the length to minimum required�
Also make sure that the hose does
not have any sharp bends or sags�
(Fig� 7)
Fig.7
1. Cut the foam seals A(adhesive type) to
the proper lengths and attach them to
the window and stool�(Fig�8)
5.2 Installation in a double-hung
sash window

12
www.electrolux.com
Fig.10
Cut this to fit your window
Fig.11
s
12.7mm crews
19mm screws or 12.7mm
hex head cap screws
Window stool
Window slider kit
Fig.12
Fig.13
Foam seal B
Fig.14
Foam seal A
(adhesive type)
2. Open the window sash and place the
window slider kit on the window stool
(Fig�9)� Attach the window slider kit to
the window stool� Adjust the length of
the window slider kit according to the
width of window� Screw down the two
screws on the window slider kit� See
Fig�9�
1. Cut the foam seals A(adhesive type) to
the proper lengths and attach them to
the window frame� See Fig�14�
4. Drive two 12�7mm screws to secure the
window slider kit to the window sash�
(Fig�11)
5. Secure the window slider kit to the
window stool(Fig�11):
A: For wooden window: Use 19mm
screws for securing�
B: For Vinyl-Clad windows: Use 12�7 hex
head cap screws for securing�
7. Cut the foam seal B to an appropriate
length and seal the open gap between
the top window sash and outer window
sash, as shown in Fig�13�
6. To secure lower sash in place, attach
right angle sash lock with 12�7mm
screw as shown(Fig�12)�
3. Close the window sash securely against
the window slider kit�(Fig�11)
Cut the adjustable window slider kit
if the width of window is less than
67�5 cm (Fig�10)�
It is difcult to lock the windows
with the safety lock for Vinyl-Clad
windows, so you can use lock by
window itself�
Fig.9
screws
Window slider kit
Window stool
67.5cm~123cm
Fig.8
Foam seal A
(adhesive type)
5.2 Installation in a sliding sash
window

13
ENGLISH
Fig.15
Window stoolWindow slider kit
screws
67.5cm~123cm
Fig.16
Win
12.7mm
screws
12.7mm
screws
dow stoolWindow slider kit
Fig.17
Foam seal B
Fig.18
2. Open the window sash and place the
window slider kit on the window stool
(Fig�15)� Attach the window slider kit to
the window stool� Adjust the length of
the window slider kit according to the
height of window� Screw down the two
screws on the window slider kit� See
Fig�15� Cut the adjustable window slider
kit if the height of window is less than
67�5cm (Fig�10)�
3. Close the window sash securely against
the window slider kit�(Fig�16)
4. Drive two 12�7 mm screws to secure
the window slider kit to the window
sash�(Fig�16)
5. Drive two 19 mm screws to secure the
window slider kit to the window stool�
(Fig�16)
6. Cut the foam seal B to an appropriate
length and seal the open gap between
the sliding sash and outer window sash,
as shown in Fig�17�
7. To secure sliding sash in place, attach
right angle safety lock with 12�7mm
screw as shown(Fig�18)�

14
www.electrolux.com
7. OPERATING INSTRUCTIONS
Some of the following instructions
can only be used by using the
Control Panel�
It is not necessary to use the
drainage hose in the "cool" mode�
Cooling mode
Fan mode
Heating mode (on some models)
In this mode the exhaust adaptor hose
MUST be used� In this mode, there is no need to use the
exhaust hose or drainage hose�
In this mode the exhaust adaptor hose
MUST be used�
In this mode, fan speed cannot be
selected�
7.1 Usage of the Control Panel
1. Press the “mode” button until the Cool
mode indicator is lit�
2. Press the "fan speed" button to
choose the fan speed according to the
illumination of the fan speed indicator�
You can choose the “hi”, “med”, “low”,
or “auto” fan speed setting�
3. Press the “ ” or “ ”button to choose
the temperature you want�
1. Press the "mode" button until the "Heat"
indicator is lit�
2. Press the " " & " " Temp buttons for
desired setting�
3. Connected drain hose� See 7�3
Drainage section�
6. AIR CONDITIONER FEATURES
6.1 CONTROL PANEL
1
23456
cool dryfanautotimer hi medlow auto filter
hold 5s
filter reset
temp/timer on/off
fan speed
mode
timer
1
25
3
4
6
Displays temperature/time
Power ON/OFF Mode Selection
Fan Speed / Filter Reset
Adjust Temperature or Timer
Timer
Dry mode
Press the “mode” button until the Dry
mode indicator is lit� The screen displays
the room temperature�
At the same time, the “low” fan indicator
lights�
Note: In this mode, fan speed cannot be
selected�

15
ENGLISH
1. Press the "mode" button until the Fan
mode indicator is lit�
2. Press the "Fan speed" button to choose
the desired fan speed�
3. The fan will run at the selected speed
and the display will show the room
temperature�
Filter reset
Auto mode
Timer mode
How to delay startup
How to delay shutdown
Always have the exhaust hose attached in
this mode�
When you set the air conditioner in Auto
mode, it will automatically select cooling,
heating (inapplicable for cooling only
models), or fan only operation depending
on what temperature you have selected
and the room temperature� The air
conditioner will control room temperature
automatically round the temperature point
set by you�
Under AUTO mode, you can not select the
fan speed�
1� Press the "mode" button until the "Auto
mode" indicator lights�
After the "Auto mode" is selected the unit
will run automatically according to the
actual room air temperature�
The timer facilitates the user to delay the
unit startup or shutdown�
Plug in the unit, so the unit turns to
standby�
Press the “timer” button, then the Timer
indicator and number of hours on the
screen will ash�
Tap or hold the UP arrow " " or the
DOWN arrow " " to change delay start
timer at 0�5 hour increments up to 10
You can delay shutdown when the unit is
on�
Press the “timer” button, then the Timer
indicator and number of hours on the
screen will ash�
Tap or hold the UP arrow " " or the
DOWN arrow " " to change delay stop
timer at 0�5 hour increments up to 10
hours, then at 1 hour increments up to 24
hours�
After 5 seconds, the Timer indicator and
the display stop ashing, and the display
shows the time remaining until the unit
shuts down�
To cancel the setting, press the “timer”
button again� The timer indicator will
switch off�
This feature is a reminder to clean the Air
Filter (See Care and Cleaning) for more
efcient operation�
The lter indicator will illuminate after 250
hours of operation� To reset after cleaning
the lter, hold the “fan speed” button for 5
seconds, then the “lter” indicator will go
off�
hours, then at 1 hour increments up to 24
hours�
After 5 seconds, the Timer indicator and
the display stop ashing� The control
will count down the time remaining until
startup�
The unit will start up in the mode as
previously set�
To cancel the setting, press the “timer”
button again� The timer indicator will
switch off�

16
www.electrolux.com
User
Max. 5 m
Remote control
Portable AC
TURNING THE UNIT ON
Remove the cover at the back of the
remote control�
Insert the provided batteries correctly(see
the instructions inside the battery
compartment)�
Close up the cover�
To replace the old batteries(which have
been used up)
Battery Installation and Important
Instructions
How to Use the Remote Control
7.2 Remote Control
1
2
5
9
3
7
4
8
6
10
Remote Control screen
Timer on button
Mode button
Fan Speed button
Timer off button
°F/°C button
Sleep button
Swing button
Temp/Timer setting button
On/Off button
with two new R03P “AAA” 1�5V batteries,
repeat the steps above�
If the remote control unit is replaced or
discarded, the batteries must be removed
and disposed of in accordance with
local legislation as they do harm to the
environment�
Do not mix old and new batteries�
Do not mix alkaline, standard (carbon-
zinc) or rechargeable (nickel-cadmium)
batteries�
Do not dispose of batteries in re� Batteries
may explode or leak� If the remote control
is not used for a long time, remove the
batteries from the remote control�
The remote control must be handled with
extreme care� Do not drop it or expose it
to direct sunlight or sources of heat�
This device complies with Part 15 of the
FCC Rules� Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation�
Point the remote control at the location
of the signal receiver� The remote control
must be no more than 16 ft(5 meters)
away from the unit (without obstacles
between the remote control and the unit)�

17
ENGLISH
Plug in the unit, then press the “on/
off” button (when turned on, the unit
will operate as the last setting before
shutdown�
To switch the unit off, press “on/off” button
again, then remove the plug�
Do NOT switch the unit off by removing
the plug�
Always switch the unit off by pressing the
“on/off” button and wait for few minutes
before removing the plug�
Press the “mode” button until the left side
of LCD screen displays “ ”�
Press the “fan speed” button to choose
the fan speed “Hi”, “Med”, “Low”, and
“Auto”�
Press the “ ” and “ ”button to choose
the temperature you want
Press the “mode” button until the left side
of LCD screen displays “ ”�
At the same time, the “low” fan symbol
appears on the screen�
Note: In this mode, fan speed cannot be
selected�
Press the “mode” button until the left side
of LCD screen displays “ ”�
Press the “ ” and “ ” button to choose
the temperature you want� At the same
time, the “low” fan indicator lights�
Note: In this mode, fan speed cannot be
selected�
Press the “mode” button until the upper
side of LCD screen displays “ auto ”�
Under AUTO mode, you can not select the
fan speed�
Press the “ ” and “ ” button to choose
the temperature you want�
When the unit is in Cool, Heat or auto
mode, you can press the “sleep” button
to make the unit run in Sleep mode� In this
mode, the fan speed will be set as “low”
automatically, which cannot be changed�
In Cool mode the selected temperature
will increase by 1 °C 30 minutes after
Press the “mode” button until the left side
of LCD screen displays “ ”�
In this mode, you can select fan speed
“Hi”, “Med”, “Low” or “Auto” by pressing
the Fan speed button and referring to the
diagram�
Cool mode
Dry mode
Heat mode(For Heat & Cool models only)
AUTO mode
Sleep mode
Fan mode
High Medium Low Auto
Note: In this mode, the air exhaust hose
does not need to be connected�

18
www.electrolux.com
the mode is selected� The temperature
will then increase by another 1 °C after
an additional 30 minutes� This new
temperature will be maintained for 7 hours
before it returns to the originally selected
temperature� This ends the "Sleep" mode
and the unit will shut down automatically�
The "Sleep" mode program can be
cancelled at any time during operation
by pressing the "Sleep", “mode” or “fan
speed” button�
Note: In Fan or Dry mode, Sleep mode
cannot be set�
Press the “swing” button to enable louver
swing function, and the upper side of
screen will display “ ”� The louver on the
top panel will swing up and down�
Press this button again to disable the
louver swing function�
Louver Swing Function
°F/°C function
Timer mode
Press the “°F/°C” button to switch
between degree Fahrenheit and degrees
Celsius� Under Dry/Fan mode, you can not
select °F/°C�
How to delay startup
Plug in the unit, so the unit turns to
standby�
Press the “timer on” button, the screen will
display “ ”and “H”�
Tap or hold the UP arrow " " or the
DOWN arrow " " to change delay start
timer at 0�5 hour increments up to 10
hours, then at 1 hour increments up to 24
hours� After 2 seconds, the setting will be
memorized� The control will count down
the time remaining until startup� The unit
will start up in the mode as previously set�
To cancel the setting, press the “timer on”
button again�

19
ENGLISH
NOTE:
• Unscrew the drain cap of continuous
drain outlet(Fig�20)�
• Connect one end of the garden hose
(sold separately) to the drain outlet then
lead the other end into a drain that is
lower than the unit(Fig�21)�
• Condensate may ow out after removing
the drain cap, if the unit is running in
Cool or Auto mode� When you want
to remove the garden hose, prepare
a drip tray (not supplied) to collect the
condensate from the drain outlet�
• Please be sure that the height of the
drain and section of the drain hose
should not be higher than that of the
drain outlet, or the continous drainage
may not work properly�
• During Cool or Auto mode, it is
recommended to disable continuous
drainage by replacing the drain cap to
the drain outlet, to reach the maximum
performance
How to delay shutdown
You can delay shutdown when the unit is
on�
Press the “timer off” button, the screen
displays “ ”and “H”�
Tap or hold the UP arrow " " or the
DOWN arrow " " to change delay stop
timer at 0�5 hour increments up to 10
hours, then at 1 hour increments up to 24
hours� After 2 seconds, the setting will be
memorized, and the display will show the
time remaining until the unit shuts down�
To cancel the setting, press the “timer off”
button again�
If the display reads "AS" , the room
temperature sensor has failed� Contact
your Authorized Electrolux Service Centre�
If the display reads "ES" , the evaporator
temperature sensor has failed� Contact
your Authorized Electrolux Service Centre�
If the display reads "P1" , bottom tray
is full� Carefully move the unit to a drain
location, remove the bottom drain plug
and let the water drain away� Restart the
machine until the "P1" symbol disappears�
If error repeats, call for service�
7.3 Fault code
Drain cap
Fig. 20
Garden hose
Fig. 21
Continuous Drainage
During the DRY mode, you will need a
garden hose (sold separately) to drain the
condensate from the unit�
Follow the steps below:
7.4 Drainage instruction

20
www.electrolux.com
NOTE: To ensure all condensate residue
has been removed, tilt the unit by lifting
it slightly upwards from the front until no
more condensate comes out from the
drain outlet�
Emptying the condensate residue inside
the unit during winter storage�
Put a drip tray (not supplied) under bottom
drain outlet, then pull out the drain cap to
allow the condensate to ow into the drip
tray�
Fig. 22
Fig. 23
Bottom
Drain Outlet
Drip cap
Drip tray
Replace the drain cap to the continuous
drain outlet when no condensate ows
out�
Put the drip tray under the bottom drain
outlet, then remove the rubber stopper
from the drain outlet, to allow the
condensate to ow into the drip tray� If your
drip tray can’t hold all the condensate, a
number of lls will be needed�
Replace the drain cap to the bottom drain
outlet when no condensate ows out�
8. CARE & CLEANING
Clean your air conditioner occasionally to
keep it looking new� Be sure to unplug the
unit before cleaning to prevent shock or
re hazards
The cabinet and front may be dusted with
an oil-free cloth or washed with a cloth
dampened in a solution of warm water and
mild liquid dishwashing detergent�
Never use harsh cleaners, wax or polish
on the cabinet front�
Be sure to wring excess water from the
cloth before wiping around the controls�
Excess water in or around the controls
may cause damage to the air conditioner�
8.1 Cleaning the unit
1. Grasp the upper panel tab and take
off the lter which behind the grill of the
back panel as shown the below gure�
To keep your air conditioner working
efciently, you should clean the lters every
two weeks of operation�
8.2 Cleaning the lters