Elite Screens Spectrum 2 Series Quick reference guide

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
SPECTRUM 2 SERIES
Section 1: Screen Design
1.1 What is it for?
The Spectrum 2 Series Electric Projection Screen features a streamlined aluminum casing in a
white enamel coating with floating wall/ceiling brackets, designed to allow wood stud
installation.
1.2 How does it work?
It uses Elite’s GREENGUARD®Certified MaxWhite® FG screen material that enhances the
picture quality with a wide viewing angle. Whether in the office or at home, the Spectrum 2 is
the best non-tensioned projection screen available.
Section 2: Product Features
2.1 Characteristics
Screen Material:
•MaxWhite® FG (fiber-glass backing) 1.1 Gain
•Screen material is flat, durable, easy to clean and mildew resistant
•180 degree wide-viewing angle for commercial and residential presentations
•Not compatible with Ultra/Short-throw Projectors
•4 side black masking borders enhance contrast ratio and absorbs projector overshoot
•Black backing on material for sharper picture and clarity
•4K Ultra HD, Active 3D, and HDR Ready
•Available in the following range of diagonal sizes:
•91"/ 100"/ 110" and 120" in 16:9 format
Design and Installation:
•Floating mount brackets allow easy alignment for a wall or ceiling installation
•Suspended ceiling installation capable
•Streamlined aluminum casing with white enamel coating is moisture resistant
•Ships fully assembled with standard 3-prong power connection ready to Plug & Play
Control System:
•3-way integrated up/stop/down control switch
•Tubular motor allows swift operation with a superior weight tolerance and operational lifespan

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
•Optional Remote control kit: Wall box w/ RJ45 port, IR/RF remotes, 5-12 volt projector trigger
cable, Wireless 5-12 volt Mono projector trigger cable, IR “eye” extension (Part# ZPM-RT) - sold
separately
Quality and Reliability:
•Flame Retardant: Complies with NFPA 701 Standards
•GREENGUARD® and GREENGUARD® Gold Certified
•2-year warranty from defects in workmanship
•3-year warranty offered through ENR-G program (Education, Non-profit, Religious, and
Government/Military)
2.2 Model Numbers
Model Number
Diag.
Size
Aspect
Ratio
Viewing
Height
(in)
Viewing
Width
(in)
Screen Material Gain
Case
Color
N.W.
(lbs)
G.W.
(lbs)
Packaging
Dimensions
(LxWxH)
SPM135VT 135" 4:3 81.0 108.0 MaxWhite® FG 1.1 White 40.1 48.4 121.5"x6.5"x6.3"
SPM150VT 150" 4:3 90.0 120.0 MaxWhite® FG 1.1 White 41.8 53.8 134.0"x7.0"x6.2"
SPM91H-E12 91" 16:9 44.6 79.4 MaxWhite® FG 1.1 White 18.6 26.2 89.5"x6.5"x6.3"
SPM100H-E12 100" 16:9 49.0 87.2 MaxWhite® FG 1.1 White 25.3 30.8 99.5"x6.0"x5.8"
SPM110H-E12 110" 16:9 53.9 95.9 MaxWhite® FG 1.1 White 28.6 34.7 110.5"x5.0"x5.5"
SPM120H-E12 120" 16:9 58.8 104.6 MaxWhite® FG 1.1 White 30.0 39.7 118.1"x6.5"x6.1"
SPM138HT 138" 16:9 67.7 120.3 MaxWhite® FG 1.1 White 44.4 51.8 133.7"x6.3"x6.5"
Section 3: Screen Material Specifications
3.1 Characteristics
MaxWhite® Fiberglass (FG) is fiberglass backed for
added stiffness which provides the flattest possible
non-tensioned screen surface with universal
applications. This material provides wide viewing
uniform diffusion while giving precise definition, color
reproduction and black & white contrast. The screen
surface has a black-backing to eliminate light
penetration, is mildew resistant and washable with mild soap and water.
* Manufacturer tip: This is an enhanced matte white product for higher end DLP/LCD projectors
suitable for commercial and residential presentations.

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Features & Benefits
•Multi-layer weave with textured surface
•Fiberglass backing with black backing
•Gain: 1.1
•View Angle: 180° (90° ± LR)
•Not compatible with Ultra/Short-throw Projectors
•Mildew Resistant
•Active 3D and 4K Ultra HD ready
•Surface can be cleaned with mild soap and water
•Flame Retardant: Complies with NFPA 701 Standards
•GREENGUARD® and GREENGUARD® Gold Certified | UL 2818
3.2 Gain Chart
Specifications
Thickness 0.36 mm
Weight 350 g/m2
Maximum Height 3.2 M (10 ft)
On-axis Gain 1.0
Half-Gain Angle Does not reach half gain

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Section 4: Execution
4.1 Important Safety & Warning Precautions
Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black
Top Drop in the roller. Please be aware of this as it will void your warranty with Elite Screens. Unapproved
changes or modifications (except for cutting the power cord for hardwire installations) to this unit are
prohibited and will void your warranty. For more information, please contact our Technical Support
Department at [phone] Ext. 604.
•Please retain this user’s guide for future reference.
•To avoid damaging the unit, do not use with any unauthorized accessories not recommended by the
manufacturer.
•Handle the unit carefully during transportation to avoid an y damages.
•To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
•The power outlet supplying power to the unit should be close to the unit and easily accessible.
•Do not install the unit on uneven or inclined surfaces.
•Do not put heavy objects on the power cord and position it properly to avoid creating a trip
obstacle.
•Never overload the power cord to prevent an electric shock or fire due to a loose contact or a short
circuit.
•There are not user serviceable parts in this unit. Do not attempt to disassemble this unit by
yourself. No one except authorized technicians can open and make repairs to this unit.
•Make sure the power source this unit is connected to has a continuous power flow.
•If there is need to use an extension cord, make sure the cord has an equal rating as the appliance to
avoid overheat.
•Do not handle the power plug when your hands are wet or your feet are in contact with water.
Do not use this unit under the following circumstances.
•Disconnect the power cord under the conditions of heavy rain, wind, thunder or lightning.
•Avoid direct Sunshine, rain shower and moisture.
•Keep away from fire sources and high temperature to prevent this device from overheating.
•Cut off the power supply first before transportation or maintenance.
•Fully disconnect from the power supply when the unit is not in use for a long period of time, as
should be done with any other electric household appliance.
•To avoid possible injury and/or an electric shock, do not attempt to use the screen if there is
obvious damage or if there are any evident broken parts.

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
4.2 Installation Warning
Due to various installation environments, the instructions provided in this user’s guide are for
reference only. Please consult a professional installation company for further installation and
safety advice. The installer must insure that proper mounting hardware is used to provide
adequate strength suitable for the installation. Elite Screens is not liable for any faulty
installations.
Individual modifications to this product are prohibited and will void the warranty with the
manufacturer. Please contact Elite Screens Customer Service for any questions.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that the interference will not occur on a particular installation. If this
equipment causes harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures.
Reorient or relocate the receiving antenna of the device which may be casing the interference.
Increase the separation between the screen and the device’s receiver.
Connect the equipment into a different power outlet other than the device.
4.3 Pre-Installation
1. Carefully unpack the screen.
2. Always handle the screen in a leveled position on a clean surface.
3. In order to protect the screen from exposure to stains, keep the screen out of contact with
foreign particles such as dust, sawdust, and/or liquids.
NOTE: Regardless of the mounting method, the screen should be securely supported so that the vibration
or pulling on the viewing surface will not cause the casing to become loose or fall. The installer must insure
that the fasteners used are of adequate strength and suitable for the installation location.

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
4.4 Hardware Parts List
4.5 Installation Instructions
Please consult a professional Installer. Elite Screens is not liable for faulty installations.
Flush Mount to the Wall
1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10
Anchors (c).
2. Install the Mounting Brackets (a) to the wall and secure with the M4x50 Screws (b).
MouMountingBracke Mounting Bracket
Fix Plate 1
Anchor
Mounting Bracket
Fix Plate 2
Wall Mounting
Bracket
Hardware Parts List
QTY
a. Mounting Bracket
2
b. M4x50 Screw
4
c. M10 Anchor
4
d. Suspended Ceiling Bracket Connector
2
e. M5x15 Screw& Bolt
4
f. Bubble Leveler
1
a.
b.
c.
d.
e.
f.
M4x50 Screw

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first fix
plate, and securing the back of the case to the second Fix Plate. Make sure the case slots
are securely attached to the Mounting Bracket.
Mounting Bracket Mounting Bracket
Fix Plate 1 Fix Plate 2
Flush Mount to the Ceiling
1. Mark the location of where the screen is to be installed, drill your holes, and insert the M10
Anchors (c).
2. Install the Mounting Brackets (a) to the ceiling and secure with the M4x50 Screws (b).
Screen Case
Mounting Bracket Case Slot 1
Case Slot 2

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Ceiling M10 Anchor
3. Attach the screen to the Mounting Bracket by inserting the top of the case to the first Fix
Plate, and securing the back of the case to the second Fix Plate. Make sure the case slots
are securely attached to the Hanging Bracket.
Suspended Ceiling using Chains (additional hardware required)
1. You can also hang the screen on a ceiling by using chains (not included).
2. Connect the Suspended Ceiling Bracket Connector (d) to the Mounting Bracket (a) and
secure with the M5x15 Screws& Bolts (e).
M4x50 Screw
Mounting Bracket
Fix Plate 1
Mounting Bracket
Fix Plate Fix Plate

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
3. Insert chains (not included) through the loop holes of the Suspended Ceiling Bracket
Connector (d).
Built in 3 Way Control Switch
1. This Series comes with a 3 Way Control Switch attached to the Power Cord, which is 3.5
meters in length.
2. Use the provided Bubble Leveler (f) to ensure the screen is level before plugging in the
power cord.
Suspended Ceiling Bracket Connector Loop Holes
M5x15 Bolt (e)
Suspended Ceiling Bracket
Connector (d)
Mounting Bracket (a)
M5x15 Screw (e)
3 Way Control
Up/Stop/Down Switch

PRODUCT WHITE PAPER
http://www.elitescreens.com
Elite Screens Inc. |Elite Screens Europe GmbH |Elite Screens France SAS |Elite Screens India
Elite Screens China Ltd.| Elite Screens Taiwan Corp. |Elite Screens Japan | Elite Screens Australia
Screen removal from Mounting Brackets
1. Pull down on the Mounting Bracket Release Tab and remove the bottom of the case first,
away from the wall/ceiling, followed by the top of the case.
Section 5: Product Specifications
5.1 Dimensions
Model Number A A1 A2 A3 A4 A5 B B1 B2 B3 C C1 C2 C3
Unit: Inches
SPM135VT 108.0 115.1 2.8 2.0 115.3 115.7 81.0 4.0 87.8 91.6 3.9 3.9 92.0 1.1
SPM150VT 120.0 127.1 2.8 2.0 127.3 127.7 90.0 4.0 96.8 100.6 3.9 3.9 104.1 1.1
SPM91H-E12 79.4 85.6 2.8 1.5 85.7 86.1 44.6 12.0 59.4 62.8 3.5 3.5 62.5 1.1
SPM100H-E12 87.2 94.3 2.8 2.0 94.4 94.8 49.0 12.0 63.8 67.2 3.5 3.5 71.2 1.1
SPM110H-E12 95.9 103.0 2.8 2.0 103.1 103.5 53.9 12.0 68.7 72.2 3.5 3.5 79.9 1.1
SPM120H-E12 104.6 111.7 2.8 2.0 111.9 112.3 58.8 12.0 73.6 77.0 3.5 3.5 88.7 1.1
SPM138HT 120.3 127.4 2.8 2.0 127.6 128.0 67.7 4.0 74.4 78.3 3.9 3.9 104.3 1.1
Unit: mm
SPM135VT 2743 2924 71 51 2929 2939 2057 102 2230 2327 99 99 2337 28
SPM150VT 3048 3228 71 51 3233 3244 2286 102 2459 2555 99 99 2644 28
SPM91H-E12 2017 2174 71 38 2177 2187 1133 305 1509 1595 89 89 1588 28
SPM100H-E12 2215 2395 71 51 2398 2408 1245 305 1621 1707 89 89 1808 28
SPM110H-E12 2436 2616 71 51 2619 2629 1369 305 1745 1834 89 89 2029 28
SPM120H-E12 2657 2837 71 51 2842 2852 1494 305 1869 1956 89 89 2253 28
SPM138HT 3056 3236 71 51 3241 3251 1720 102 1890 1989 99 99 2649 28
Release Tab
Pull Bottom of case first away from wall/ceiling