Elite Screens ezCinema Series User manual

ezCinema Series – Quick Set up Guide
Step 1: Position the swivel foot
Rotate the swivel foot one half turn so that they point outwards as pictured above. This is so that the screen can be stable once the
screen has been set up.
Step 2: Open the box cover
Unlatch the housing’s cover. Secure the box with one hand while removing the telescopic support rod with your other hand.
Step 3: Installing the support rod
First, make sure that the hanging hook is pointing toward the front facing the same direction as the screen, then insert the square end
of the telescopic support rod into the support plate.
Step 4: Pull up the screen
Hold the pull hook with one hand and pull the screen up gently and hang it on the bracket hook. Then, be sure to tighten the locking
sleeves once you’ve reached the desired height.
Front
This is only a quick set up guide. Please visit our website for a complete
USER GUIDE on your ezCinema Series. For More Information or tech
support, please visit www.elitescreens.com

Step 5: Vertical Adjustment (In case you need to readjust the height of the screen)
Loosen the locking sleeve with one hand and adjust the small support rod with the opposite hand slowly raising or lowering the
screen until you’ve reached the desired position. Then, tighten the locking sleeve to secure the desired height.
On-Line User Guide or Download
线上说明书或下载 /線上說明書或下載
オンラインユーザーマニュアル／ダウンロード
On-Line Manual del usuario o descargar
On-Line-Benutzerhandbuch oder Herunterladen
Manuel de l'utilisateur en ligne ou télécharger
On-Line manuale d'uso o download
On-Line Руководство пользователя или скачать
On-line Manual de utilizare sau de descărcare
Hưng dn sdng trc tuyn hay ti xung
     
온라인 사용자 설명서 또는 다운로드
On-Line Instrukcja obsługi lub pobierania
On-Line Manual do Usuário ou Download
On-Line User Manual atau Unduh
Buku Panduan Online atau unduh
www.elitescreens.com/UG
Note: When attaching the screen to the pull hook, you may notice a
slight gap between the top bar and screen material. This is
completely normal and it is used to maintain a leveled flat surface
when projecting an image.