Elkay EFP01-G-A Instruction Manual

ELKAY Pre-Filtration Sediment Filter EFP01-G-A
Please read all instructions, specications, and precautions before installing and using
your water lter system.
Page 1 1000003998 (Rev A - 05/2017)

PARTS LIST
• Filter Assembly
• G1 Brass Nut (2)
• G3/4 Brass Connector (2)
• Rubber Washer (2)
• 12.5mm I.D. PVC Drain Tube (300mm)
• 150mm Cable Tie
• 29.5mm ID PE Drain Tube (1.2m)
• Hose Clamp
• 3V Lithium Battery
• Manual
SPECIFICATIONS
Rated operating pressure 0.1-0.4Mpa
 50L/min at 0.2MPa
Rated ambient
temperature 4-40°C
Rated operating
temperature 5-38°C
Ambient Humidity 90% Max
Cable Tie
P.E. Drain
Tube
Battery
Hose
Clamp
Brass Nut Brass
Connector
Rubber
Washer
PVC Drain
Tube
Page 21000003998 (Rev A - 05/2017)

Notice




• 
• 
• 

• 
• 
Caution
Caution
140mm
318mm
264mm
95mm
Page 3 1000003998 (Rev A - 05/2017)



Note:

Before Installation
Ball
Valve
Water
Meter
Floor
Drain
Floor
X>220mm

pipe center and upper
barrier)
X>65mm


X=180±5mm

inlet/outlet)
X<1200mm

inlet/outlet center

X>350mm


Page 41000003998 (Rev A - 05/2017)

Installation
1. 

Note:

Ball
Valve 1
Water
Meter
Floor
Drain
Floor
Pre-Filter
PVC Drain Tube
PE Drain Tube
Ball
Valve 2
Ball
Valve 4
Ball
Valve 3
Page 5 1000003998 (Rev A - 05/2017)

2. 
the tube through the anti-siphon opening using the provided cable tie. Pull the cable tie tight

PVC Drain
Tube
Center
Boss
Cable Tie

Opening
3. 


Rubber
Washer
Brass
Connector
Brass Nut 
PTFE tape
Page 61000003998 (Rev A - 05/2017)

4. 
5. 
nose plyers or another tool can be used to turn the brass connector using the internal ridges.
Note:
be about 140mm.
Internal
Ridge
Inlet Outlet
140mm
Page 7 1000003998 (Rev A - 05/2017)

6. 


Note:
are over tightened.
OutIn
Page 81000003998 (Rev A - 05/2017)




Rotate the sump and tighten the nut.
Note: The decorative cover direction can be changed
Connecting Nut
Page 9 1000003998 (Rev A - 05/2017)

Clamp In
This Groove
Drain
Connector

Opening
8. 


•               

•                
                
cause damage.
• 

• 

Page 101000003998 (Rev A - 05/2017)