Elmo CRV-24 User manual

Instruction Manual
Student Response System
ＣＲＶ-２４／３２／４０
Please read this manual before using this product.
Please retain this manual.

2
IMPORTANT SAFETY INSTRUCTIONS
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings,
Install in accordance with the
manufacturer’s instructions.
8) Do not install near any heat sources
such as radiators, heat registers, stoves,
or other apparatus (including amplifiers)
that produce heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong
are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories
specified by the manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table
specified by the
manufacturer, or sold
with the apparatus.
When a cart is used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lighting
storms or when unused for long periods
of time.
14) Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
The lightning flash with arrowhead symbol,
within an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous voltage" within the product's
enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
This marking is located at the bottom of
product.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the product.

3
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR MOISTURE.
WARNING: Handling the cord on this product or cords associated with accessories sold with this product, will
expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm.
Wash hands after handling.
NOTICE:
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Changes or modifications made to this equipment not expressly approved by ELMO CO.,LTD. may void
the FCC authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Radiofrequency radiation exposure Information:
The radiated output power of the device is far below the FCC radio frequency exposure limits.
Nevertheless, the device shall be used in such a manner that the potential for human contact during
normal operation is minimized.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and
meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of
RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un
environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF)
CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans
évaluation du débit d’absorption spécifique (DAS).

4
IMPORTANT SAFEGUARDS
Follow these guidelines to use the product safely.
These "IMPORTANT SAFEGUARDS" indicate important points that should be followed to use
this product safely and correctly and prevent damage to the product or other property and injury
to you and others.
Read carefully before operating the product and retain for future reference.
Read the manual after making sure that you understand the meaning of the following displays
and symbols.
Warning This symbol indicates information that, if ignored, could possibly
result in serious personal injury or even death due to incorrect
handling.
Attention This symbol indicates information that, if ignored, could possibly
result in personal injury or damage to property due to incorrect
handling.
Symbols Used in this Manual
Name: Caution
Meaning: Indicates that the user must, without fail, pay careful attention to any sentences
or illustrations marked with a Caution symbol.
Name: Prohibited
Meaning: Indicates that the user must pay careful attention to any sentences or
illustrations marked with a Prohibited (do not do) symbol.
Name: Compulsory
Meaning: Indicates that the user must pay careful attention to any sentences or
illustrations marked with a Compulsory (must do) symbol.
Name: Do not use in a bathroom or shower cubicle
Meaning: Indicates that using the product in a bathroom or shower cubicle could result in
injuries through a fire or electric shock, and is strictly prohibited.
Name: Do not touch
Meaning: Indicates that touching the area could result in injuries through electric shock,
and is strictly prohibited.
Meaning: Do not disassemble
Meaning: Indicates that disassembling the product could result in injuries through electric
shock, and is strictly prohibited.

5
Warning
If for any reason smoke comes out of the product, or you notice any unusual odors or
sounds, immediately turn off the power switch on the product and remove the batteries.
Then remove the wireless adapter from your computer.
Continuing to use the product in this condition could result in a fire or electric shock.
Check that smoke is no longer coming out of the product, and then contact your local
dealer to request maintenance. Do not attempt to service this product yourself.
If for any reason liquid is spilled into the product, immediately turn off the power switch
on the clicker and remove the batteries. Then remove the wireless adapter from your
computer and contact your local dealer immediately. Continuing to use the product in
this condition could result in a fire or electric shock.
If for any reason foreign objects enter the product, immediately turn off the power switch
on the clicker and remove the batteries. Then remove the wireless adapter from your
computer and contact your local dealer immediately. Continuing to use the product in
this condition could result in a fire or electric shock. (Be extra careful if there are
children in the area when using the product.)
If for any reason the product is dropped or damaged, turn off the power switch on the
clicker and remove the batteries. Then remove the wireless adapter from your computer
and contact your local dealer. Continuing to use the product in this condition could
result in a fire or electric shock.
Do not remove the cover from the product. Doing so may expose you to dangerous
voltage and could result in electric shock.
Contact your local dealer for any internal inspections, maintenance, or repair.
Do not remodel the product. This could result in a fire or electric shock.
Do not place the product on an uneven surface of unstable stand. It could fall or topple
over and result in an injury.
Do not spill water on the product. This could result in a fire or electric shock.
Do not use the product in a bathroom or shower cubicle. This could result in a fire or
electric shock.
Do not touch the product or the wireless adapter during a thunder storm. This could
result in an electric shock.
Do not place the product or the wireless adapter where someone can trip over it. This
could result in injury.
Do not drive a nail into, hammer or stamp on the product.
Otherwise the product may be damaged or deformed and shorted and result in leakage,
heat, smoke, explosion or fire.

6
Warning
Do not apply any heavy impact to the product or throw it. Otherwise the product may be
damaged or deformed and shorted and result in leakage, heat, smoke, explosion or fire.
Do not use a battery that appears to be damaged or deformed in any way. This could
result in leakage, heat, smoke, explosion or fire.
Do not reverse the battery's polarity
(± reversed). Abnormal chemical reaction may
occur inside the battery which could result in leakage, heat, smoke, explosion or fire.
If any liquid from a battery leaks onto your skin or clothes, immediately flush the area
with clean water, without rubbing it, then seek medical attention right away.
Otherwise the liquid may harm your skin.
Keep parts of the product out of children's reach as there is a danger they could be
swallowed and cause bodily harm. If any of the parts are swallowed, consult a doctor
immediately.
Attention
Do not place the product in a damp or dusty location.
This could result in a fire or electric shock.
Do not place the product in a location where it could be exposed to smoke, steam, or
water droplets such as on a kitchen counter or near a humidifier. This could result in a
fire or electric shock.
If this product is not going to be used for a long time, take the batteries out of the
product. Otherwise it could result in fire.
Ask the dealer from where you purchased this product for regular maintenance. A
buildup of dust inside the product can cause fire or malfunction.
Do not put the product on an electromagnetic cooker or in a microwave oven or a
pressure cooker. The battery will be damaged and leakage, heat, smoke, explosion or
fire may occur.
Do not put the clicker, strap or other accessories into your mouth. It may harm your
health.
Do not swing the strap around with the clicker attached. The strap may be cut and the
clicker may hit someone causing injury or may damage an object in the vicinity.

7
Usage precautions
■About radio waves used by the clicker
The clicker uses radio waves on the 2.4 GHz band. When using the clicker, a radio station
license is not necessary. However, please note the following precautions.
Do not use the clicker near the following:
■ Microwave ovens or industrial, scientific or medical equipments, such as pacemakers
■ In-factory radio stations for mobile unit identification systems (radio stations that require a
license) used in production lines of factories.
■ Specified low power radio stations (radio stations that do not require a license)
■ IEEE802.11b/g/n wireless LAN devices
When the clicker is used near any of the equipment mentioned above, it is possible that
electric wave interference could occur.
When using the clickers, keep at least 20cm distance between the clickers.
Do not cover the upper part of the clicker with
your hand. The wireless connection with the
wireless adapter may be degraded.
In an environment where there are many
obstacles, the wireless connection with the
wireless adapter may be degraded.
■About wireless equipment used on the 2.4 GHz band
This frequency bandwidth is the same as for industrial, scientific, and medical equipment such
as microwave ovens, mobile unit identification systems (radio stations that require a license)
used in factory production lines, and specified low-power radio stations (radio stations that do
not require a license).
■ Before using this product, check that there are no radio stations for mobile unit identification
systems or specified low-power radio stations nearby.
■ If this product emits radio waves which interfere with in-factory radio stations for mobile unit
identification systems, cease the use immediately and stop generating the radio waves. For
information on countermeasures, etc. (for example, erecting partitions), contact one of our
sales offices whose details are provided at the end of this manual.
■ If this unit emits radio waves which interfere with specified low-power radio stations used for
mobile unit identification systems, or causes similar problems, contact one of our sales offices
whose details are provided at the end of this manual.

8
■Usage environment / Storage
・The clicker is designed for inside use. Outside use is not recommended.
・Do not place the clicker in any humid, dusty, salt bearing wind, or vibrating locations.
・Use the clicker product under the following environmental conditions:
Temperature: 0°C - 40°C (32°F - 104°F)
Humidity: 30% - 90% (No condensation)
・When storing the product, do not leave it under direct sunlight or by heaters. It may be
discolored, deformed, or damaged.
■Maintenance
・Perform cleaning of the clicker in a dry place. Make sure to remove the batteries before
cleaning.
・Use a soft, dry cloth for cleaning.
・To remove heavy dirt, moisten a soft cloth with diluted neutral detergent and wipe the
dirt after wringing the cloth.
・Do not use any volatile solvent such as thinner or benzene.

9
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS..............................................................................2
IMPORTANT SAFEGUARDS ...............................................................................................4
Usage precautions ..............................................................................................................7
Before Use .........................................................................................................................12
Main functions .................................................................................................................13
Supplied Items.................................................................................................................14
Part Names .....................................................................................................................15
Preparation ......................................................................................................................17
Remove an insulation sheet from the clicker.................................................................17
Replacing the batteries of the clicker ............................................................................18
Attach the clicker number sticker (if necessary) ............................................................18
Software installation ......................................................................................................19
Connecting the wireless adapter ...................................................................................21
Launching Image Mate Accent for SRS.........................................................................21
Database Selection .......................................................................................................22
About Image Mate Accent.................................................................................................23
Basic Screen ...................................................................................................................23
Basic Screen Configuration...........................................................................................23
Various Operation Modes ................................................................................................24
Diagram of the modes ...................................................................................................24
PC Annotation Mode .....................................................................................................25
PC Operation Mode ......................................................................................................25
Document Camera Mode ..............................................................................................25
Whiteboard Mode ..........................................................................................................25
Teaching Material Import Mode .....................................................................................26
Drawing Operation ..........................................................................................................28
Drawing .........................................................................................................................28
Deleting .........................................................................................................................29
Recording a Lesson ......................................................................................................30
Operating the Document Camera .................................................................................32
Mask Function...............................................................................................................33
Highlight Function .........................................................................................................34
Scroll Function ..............................................................................................................35
Using PowerPoint Support Function .............................................................................36
Setting the Pen..............................................................................................................37
List of Menu icons .........................................................................................................38
Using SRS ..........................................................................................................................41

10
Operation screen of SRS.................................................................................................41
List of SRS operations.....................................................................................................42
List of SRS buttons .......................................................................................................42
List of clicker operations................................................................................................48
Starting SRS....................................................................................................................49
From posing a question to close the question.................................................................51
Finishing SRS..................................................................................................................57
Group learning.................................................................................................................58
Review of the session......................................................................................................61
Giving an award...............................................................................................................62
Utilizing the collected data ...............................................................................................63
Using Result Display Software ........................................................................................63
Starting the software......................................................................................................63
Displaying the Session report........................................................................................64
Output the personal report ............................................................................................68
Saving in other formats .................................................................................................69
Various Settings ................................................................................................................70
Wireless setting for the clicker.........................................................................................70
Image Mate Accent for SRS Configurations....................................................................71
Starting the software......................................................................................................71
Description of menu tabs...............................................................................................71
Settings .........................................................................................................................72
SRS Settings.................................................................................................................73
Software update ............................................................................................................75
About.............................................................................................................................76
SRS Data Settings...........................................................................................................77
Starting the software......................................................................................................77
Check the connection....................................................................................................79
Battery level ..................................................................................................................80
Clicker Information ........................................................................................................81
Register students information........................................................................................82
Let’s take photos! ..........................................................................................................83
Database Settings ...........................................................................................................84
Create Database ...........................................................................................................84
Select Database............................................................................................................85
Edit profile of database..................................................................................................86
Adding or Changing the clicker........................................................................................87
Other Function...................................................................................................................89
About LED .......................................................................................................................89