Elo TouchSystems 4 I-Series User manual

Revision A
P/N E232026
www.elotouch.com
Quick Installation Guide
I-Series 4 Slate
© 2021 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..
America
800-ELO-TOUCH
Tel [phone]
[email protected]
Europe (EMEA)
Tel [phone]
[email protected]
Asia Pacific
Tel [phone]
[email protected]
Elo Technical Support
Online self-help: www.elotouch.com/support
Kit Contents
I-Series 4 USB-C Display
I/O Hub
DC Power Supply
Cable lock bracket and screw

1
2
Remove the cable locking screw and bracket from the rear of the I-Series4 Slate display to access
the USB-C connection.
Plug the USB-C cable from the I/O hub to the rear of the I-Series 4 Slate display.
3
4
Reinstall the cable locking screw and bracket on the rear of the I-Series 4 Slate display. The bracket
slides in at an angle and has two small hooks that engage with slots inside the cable cavity. The bracket
must be secured with the included screw.
Secure the USB-C cable on the back of the I-Series 4 Slate display with the cable security bracket. The
I/O hub has two threaded mounting holes which allow it to be mounted out of site. See dimensional
drawing for mounting hole details.
See detailed user guide at www.elotouch.com for additional infomation on mounting Elo I-Series 4 Slate
dIsplay to Elo stands or wallmounts.
1.2 meters
I/O Hub