Elo TouchSystems IDS 3 Series User manual

Revision A
P/N E918683
www.elotouch.com
© 2019 Elo Touch Solutions, Inc. All rights reserved.
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively “Elo”) makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc..
North America
800-ELO-TOUCH
Tel [phone]
Fax [phone]
[email protected]
Europe
Tel [phone]
Fax [phone]
[email protected]
Asia-Pacific
Tel [phone]
Fax [phone]
[email protected]
Latin America
Tel [phone]
EloSales.LAT[email protected]
Elo Touch Solutions Technical Support
Online self-help: www.elotouch.com/support
Quick Installation Guide
IDS 3 Series Display

DisplayPort
Touch USB
OSD Remote
Audio Out
Serial
HDMI 1
Optional
Expansion
Bay
HDMI 2
Go to www.elotouch.com/support to download user manual.
请访问 www.elotouch.com.cn 获取用戶手册请保留备用
Oktopus Whiteboard Software license card and download instructions are included in the accessory box.
1. Mounting IDS Display (VESA Mount)
(Compatible Elo low-prole wallmount kit P/N E282876 available at www.elotouch.com)
3. Elo Computer Module Mounting (ECM sold separately)
(Remove cover to access docking connections)
4. Elo Edge Connect Peripheral Mounting
Each edge of the 6553L has a removable snap on cover for mounting Elo Edge Connect™ peripherals.
Included Peripherals: A stylus tray and two stylus are included with the IDS display. Install the tray in the lower
location using the two M3 screws included with tray in the accessory box.
Addtional peripherals sold separately:
Magnetic Stripe Reader P/N: E001002
2D Bar Code Scanner P/N: E926356
Fingerprint Reader P/N: E001001
400mm VESA = M6 screws, x4
2. Connections
600mm 400mm
400mm
600mm
100 - 240V AC
Power
OSD
Source
USB
HDMI 3
600mm VESA = M8 screws, x4
Stylus Tray
Conference Room Webcam P/N: E277819
NFC Reader P/N: E001004
Other Peripherals available at www.elotouch.com