Elonex PX9433 User manual

1

Preface
2
1Introduction
Preface
Please read this user manual carefully to help you get the
most out of your eBook. Also please observe the safety
warnings so you do not damage your device or more
importantly yourself. A full support site is available at
www.elonex.com/support
1.1. Package Contents
Before using your 621EB eBook Reader, please check
your package contents to ensure there aren’t any items
missing. If any of the listed items are missing, please
contact your point of purchase for assistance.
The package includes:
1. eBook Reader*1
2. USB cable (for data and power)*1
3. Quick start guide*1

Chapter 1 Introduction
3
If you have any problems or questions
please DO NOT take your eBook back
to the store –contact us for some
helpful advice.
Tel –0871 222 3456
eMail –[e-mail]
Web –www.elonex.com/support

Chapter 1 Introduction
4

Chapter 1 Introduction
5
CE Mark Warning
This equipment complies with the requirements relating to
electromagnetic compatibility, EN 55022 Class B for ITE,
the essential protection requirement of Council Directive
89/336/EEC on the approximation of the laws of the
Member States relating to electromagnetic compatibility.
Company has an on-going policy of upgrading its products
and it may be possible that information in this document is
not up-to-date. Please check with your local distributors for
the latest information. No part of this document can be
copied or reproduced in any form without written consent
from the company.

Chapter 1 Introduction
6
1.2. Physical Details
Control Button

Chapter 1 Introduction
7
Control Button

Chapter 1 Introduction
8

Chapter 1 Introduction
9

Chapter 1 Introduction
10
1.3. Using a Memory Card
The 621EB eBook Reader supports SD memory cards, up
to 32GB. Please follow the steps to properly insert/remove
the SDHC card to the device.
TO INSERT MEMORY CARD
Insert the card into the device with the metallic connectors
facing upwards as shown in the picture.
STEP 1