- 5 -
4. Choose and set below functions as you want.
Air flow speed selection:
Press the speed selection button to choose air flow speed, the corresponding speed level logo will be
shown on the screen: LOW (logo " ”) →MEDIUM (logo “ ”) →HIGH (logo “ ”) →LOW (logo
"”)… in turn.
Swing function and air flow direction:
Press swing button to make the air flow swing left and right; press it again to cancel the swing and fix the
air flow at a specific direction horizontally. The logo “ ” is shown on the screen when the louver
swings.
To adjust the air flow direction vertically, just lift up or press down the louver outside.
Cooling:
Press the cooling button to start the cooling function. The logo “ ” will be shown on the screen. Press
again the button to cancel the function. This function is only effective when the water tank has ice pack(s)
inside. Do not activate this function when the water in the water tank is below the “MIN” level; add
enough water into the water tank first.
Mode selection:
Press the mode selection button to choose the running mode from Sleeping mode →Natural mode →
Normal mode →… (Repeating).
1) Normal mode: under this mode, the motor works with the preset speed, and the logo “ ” is
displayed. You can press the speed button to choose speed Low /Medium /High.
2) Natural mode: under this mode, the logo “ ” is displayed. The appliance runs according to the
natural mode program. It is generating softer and more comfortable air flow, you will feel like the wind
from the nature. You can press the speed button to choose Low /Medium /High natural wind.
3) Sleeping mode: under this mode, the logo “ ” is displayed. The appliance runs according to the
sleeping mode program. Air flow will weaken with the decrease of body temperature when you fall
asleep, which will protect you from catching cold. You can press the speed button to choose Low
/Medium /High sleeping wind.
Timer Setting:
Press the timer setting button to start the timer setting, you can set the appliance to automatically turn
itself off in 1 hour /2 hours/ 3 hours/…/11 hours /12 hours (maximum setting). Continuously press the
button to select the desired running time for the appliance. When the digital display shows “00”, no
operation for several seconds, and the timer will be canceled.
Ion mode:
Press the Ion mode button to activate the ionizer function. The logo “ ” is displayed when this function
is activated. Ions attract tiny particles in the air such as dust, pollen and mold spores etc. which cause
them to become too heavy to remain airborne. This feature allows us to have clean air in the
environment.
NOTES:
1. It is recommended to change water and clean water tank frequently.
2. Activating the cooling function with insufficient water may cause malfunction of the water pump.
3. Do not take out the water tank immediately after the appliance is just turned off. Wait several minutes to
avoid the water dripping out from the cooling pad.
REMOTE CONTROL
This unit has a remote control. Please use one piece of CR2025 battery for this remote control. Please insert
the battery to the remote control tightly (Refer to the instruction behind the remote control). If it is not in use