Emerson Rosemount 975 Use and care manual

Reference Manual
00809-0200-4975, Rev A
June 2017
Rosemount™975 Flame Detector
HART®Communication Manual

i
Reference Manual
0809-0200-4975, Rev A
Contents
June 2017
Contents
1Section 1: Introduction
1.1 Using this manual. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Product recycling/disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.3 Scope . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.4 Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.5 Reference documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
2Section 2: Product Overview
2.1 Rosemount 975 Flame Detector Product Overview . . . . . . . . . . . . . . . . . . . . . . . . 3
3Section 3: HART Interconnection
3.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2 Point-to-point mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.3 Multidrop mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4Section 4: HART Device Description Language
4.1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4.2 HART protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
5Section 5: HART Menu Structure
5.1 HART menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
5.2 Root menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5.3 Status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.4 Device setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.5 HART output menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
5.6 HART status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
AAppendix A: Field Device Status
A.1 Field Device Status Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Contents

ii
Reference Manual
FGD-MAN-928-Wireless-Gas Monitor, Rev A
Contents
June 2017
Contents

Reference Manual
00809-0200-4975, Rev A
Introduction
June 2017
1
Introduction
Section 1 Introduction
1.1 Using this manual
The sections in this manual provide information on installing, operating, and maintaining the
Rosemount™975 Flame Detector. The sections are organized as follows:
Section 2: Product Overview provides a high-level description of the Rosemount 975 Flame Detector.
Section 3: HART Interconnection contains information on the connection modes used to connect HART
Communication with the Rosemount 975 Flame Detector.
Section 4: HART Device Description Language describes the HART Device Description Language format
used to configure the Rosemount 975 Flame Detector.
Section 5: HART Menu Structure provides HART menu , submenu, and command information.
Appendix A: Field Device Status contains field device status information.
1.2 Product recycling/disposal
Recycling of equipment and packaging should be taken into consideration and disposed of in accordance
with local and national legislation/regulations.
1.3 Scope
Digital communication with the Rosemount 975 Flame Detector allows the operator to monitor the
status of the detector, determine factory settings and initiate field tests.
This document provides guidance for establishing HART communication and
describe the HART menu
structure when using the Rosemount 975 Flame Detector with a HART Handheld
Communicator,
computer, or another process interface device that supports Device Description Language (DDL).
1.4 Purpose
This manual is designed for use by system integrators and end users to compliment other
documentation (for example, the user manual for your Rosemount 975 Flame Detector) by providing a
complete, unambiguous description of the HART Host Application and Communication.
1.5 Reference documents
HART Field Communications Protocol Specification, HCF_SPEC-12, Available from the HCF.

2
Reference Manual
00809-0200-4975, Rev A
Introduction
June 2017
Introduction

Reference Manual
00809-0200-4975, Rev A
Product Overview
June 2017
3
Product Overview
Section 2 Product Overview
Rosemount 975 Flame Detector Product Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
2.1 Rosemount 975 Flame Detector Product Overview
The Rosemount 975 Series Flame Detectors are a family of Flame Detectors that incorporate advanced
optical spectral analysis of flames. Rosemount 975 Flame Detectors operate reliably in the harsh
conditions of offshore drilling and production platforms, FPSO vessels, fuel loading facilities, LNG and
LPG plants, oil refineries, aircraft hangars, paint spray booths, gas turbine power stations, chemical and
petrochemical plants.
Rosemount 975 Flame Detectors employ the latest UV/IR (Ultra Violet & Infrared), and IR3 (Triple IR
patented multi-spectrum detection) Flame Detection technologies.
Depending on the specific model, the Rosemount 975 Flame Detector may include the following
interfaces: 4-20mA current output, HART communication, relays, RS485 ModBus communication,
status LEDs.

4
Reference Manual
00809-0200-4975, Rev A
Product Overview
June 2017
Product Overview

Reference Manual
00809-0200-4975, Rev A
HART Interconnection
June 2017
5
HART Interconnection
Section 3 HART Interconnection
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Point-to-point mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
Multidrop mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5
3.1 Overview
The host connects to the Rosemount 975 Flame Detector through the two-wire 4-to-20mA current loop.
Refer to the User Manual for your Rosemount 975 Flame Detector for connection details.
This is the only output from the Rosemount 975 Flame Detector, representing the "Fire Detection"
channel. This output corresponds to the Primary Variable (PV). HART Communication is supported on
this loop.
3.2 Point-to-point mode
The HART Communicator can connect to Rosemount 975 Flame Detector at any wiring termination
point in the analog output signal loop. Connect the HART communicator in parallel with 500 Ohm load
resistor. The HART connections are non-polarized.
Turn on the HART Communicator. If a device is found, the HART Communicator displays the Main Menu.
If no device is found, check the connections and verify the presence of a 500 ohms load resistance in
series in the loop.
3.3 Multidrop mode
Optical flame detectors are life safety devices and require the 4-20 mA loop for transmitting important
detector status data. They should not be used in conjunction with multidrop mode, If multidrop mode
required, the alarm and fault relay contacts must be connected directly to the safety system or fire panel
for signaling purposes.
Figure 3-1. HART Connection Block Diagram

6
Reference Manual
00809-0200-4975, Rev A
HART Interconnection
June 2017
HART Interconnection

Reference Manual
00809-0200-4975, Rev A
HART Device Description Language
June 2017
7
HART Device Description Language
Section 4 HART Device Description Language
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
HART protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 7
4.1 Overview
This section contains information on the HART Device Description Language (DDL) format used to
configure the Rosemount 975 Flame Detector.
4.2 HART protocol
The HART protocol incorporates a concept called the Device Description Language that enables all
suppliers of HART instruments to define and document their products in a single consistent format. This
format is readable by handheld communicators, computers, and other process interface devices,
regardless of manufacturer, providing full functionality from any HART device.
Note
For full compliance with the HART Host application, install a Rosemount 975 Flame Detector Device
Description on your computer.
The Rosemount 975 Flame Detector Device Description enables presenting the HART menu in a
graphical mode. This option is not supported by all hosts manufacturers. Refer to the HART host
literature for information about using the graphical mode.

8
Reference Manual
00809-0200-4975, Rev A
HART Device Description Language
June 2017
HART Device Description Language

Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
9
HART Menu Structure
Section 5 HART Menu Structure
HART menu overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 9
Root menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 10
Status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 11
Device setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12
HART output menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 13
HART status menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14
5.1 HART menu overview
The following figure shows the HART menu structure. The editable menu options are bolded. The
submenus are underlined.
Figure 5-1. HART Menu Structure

10
Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
HART Menu Structure
5.2 Root menu
When HART communication is established with the Rosemount 975 Flame Detector, the Root menu
opens.
Figure 5-2. .Root Menu
Table 5-1. Root Menu Commands
1Manufacturer Rosemount, Inc. Read
2Model 975 Read
3Dev ID Device unique identification number Read
4Dev. Model Device sensor type (see Annex B, Table B1: Fire Detection
Sensor Type Codes Read
5PV Snsr s/n Device serial number Read
6Tag User-definable text up to 16 characters in length
associated with the field device installation. R/W
7Long Tag User-definable text up to 32 characters in length
associated with the field device installation. R/W
8Descriptor User-definable text associated with the field device. R/W
9 Message User-definable text associated with the field device. R/W
10 Final asmbly num A number associated with the field device used for
identification purposes. R/W
11 Date A user-definable date. R/W
12 Status Indicates a field device condition. Refer to Appendix A:
Field Device Status.Read
13 Self Test Performs internal tests. Detected problems are displayed
in the Status menu. Button
14 Status menu Displays current status and diagnostic information. Menu
15 Device Setup menu Setup and configuration functions Menu
16 HART Output menu HART-specific variables Menu

11
Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
HART Menu Structure
5.3 Status menu
Figure 5-3. Status Menu
Table 5-2. Status Menu Commands
14-20 Value Displays the analog output of the Fire Detection Channel. Read
2Internal
Temperature Displays the internal temperature of the Rosemount 975 Flame Detector in degrees Celsius. Read
3Input Voltage Displays the Rosemount 975 Flame Detector’s supply voltage. Read
4Heater Control Indicates whether the heater control is Manual or Automatic. Read
5Heater State Indicates whether the heater is On or Off. Read
6Operating Time Displays the Rosemount 975 Flame Detector’s total operating
time since the last startup. Read
7Status Indicates a field device condition. Refer to Appendix A: Field
Device Status.Read
8Self Test Performs internal tests. Detected problems are displayed in
the Status menu. Button

12
Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
HART Menu Structure
5.4 Device setup menu
Figure 5-4. Device Setup Menu
Table 5-3. Device Setup Menu Commands
1Manufacturer Rosemount, Inc. Read
2Model 975 Read
3Dev ID Device unique identification number Read
4Config. Changed
Counter The number of Device Configuration changes since the manufacture. Read
5Enable Alarm Latch Enables the alarm relay to remain energized after exiting
the Alarm Mode. Read
6Activate ACC relay
on Warning Activates ACC relay during Warning status. R/W
7Enable Auto BIT Activates alarm after successful self-test. R/W
8Activate ACC relay
on Successful BIT Activates ACC Relay after successful self-test. R/W
9Activate Alarm on
Successful BIT Activates Alarm after successful self test. R/W
10 ACC as E.O.L Accessory Relay is activated at Power on Continuously. R/W
11 Sensitivity Detectors Sensitivity setting R/W
12 Alarm Delay Defines the delay between Fire Detection and Alarm. R/W
13 Heater Mode Select a Heater Mode: Auto, On, or Off.R/W
14 Heater on Temp. This option is active in Heater Auto mode. It allows setting the temperature at which the optics heater begins
operating.
R/W
15 Poll Address The address used by the host to identify a field device. R/W
16 Loop Current Mode Select a Current Mode: Fixed or Not Fixed. R/W

13
Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
HART Menu Structure
5.5 HART output menu
Figure 5-5. HART Output Menu
Table 5-4. HART Output Menu
1Num. Req. Preams. HART-specific synchronization messages. Read
2Num. Resp. Preams. HART-specific synchronization messages. Read
3Universal Rev. HART protocol revision Read
4Fld. Dev Rev. The Field Device hardware revision. Read
5Software Rev. The Field Device software revision. Read
6PV % rnge.
The Primary Variable (PV) Percent of Range tracks the
Digital Value representation with respect to the range
defined by the Lower Range and Upper Range Value for
normal operating modes. The units of this variable are
expressed as a percentage.
Read
7PV LRV PV Lower Range Value Read
8PV URV PV Upper Range Value Read
9PV Class Not classified Read
10 PV PDQ Indicates the PV status. Read
11 PV LS Indicates whether the PV is limited. Read
12 PV LSL Lower Range Value Good status Read
13 PV USL Upper Range Value Good status Read
14 PV Min Span PV Upper Range Value–PV Lower Range Value Read
15 PV Damp. The time required to change the PV value. Read

14
Reference Manual
00809-0200-4975, Rev A
HART Menu Structure
June 2017
HART Menu Structure
5.6 HART status menu
Figure 5-6. HART Status Menu
Table 5-5. HART Status Menu
1Reset the Configuration Changed flag Clears the Configuration Changed bit Button

Reference Manual
00809-0200-4975, Rev A
Field Device Status
June 2017
Field Device Status 15
Appendix A Field Device Status
Field Device Status Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15
A.1 Field Device Status Description
The following table contains the Rosemount 975 Flame Detector field device statuses and a description
of each status.
Table A-1. Field Device Status Description
Field Device Status Description
NNormal State
BSelf-test is performed
BIT FAULT Self-test failed
IR Infrared Detection
UV Ultraviolet Detection
WFire Warning
AFire Alarm
FGeneral Fault

Field Device Status
June 2017
Reference Manual
00809-0200-4975, Rev A
Field Device Status 16