Endress+Hauser Proline Prosonic Flow 93 Parts list manual

BA071D/06/en/11.04
50100016
Valid as of version:
V 2.00.XX (Device software)
Description of Device Functions
Proline Prosonic Flow 93
Ultrasonic Flow Measuring System
6
0000 0001 0002 0003 0004 0005000
AAAA
1000 1001 1002 1003 1004 1005100
BAAB
2000 2001 2002 2003 2004 2005200
CAAC
3000 3001 3002 3003 3004 3005300
DAAD
4000 4001 4002 4003 4004 4005400
EAAE
5000 5001 5002 5003 5004500
FAAF
4200
5200
4201
5201
4202
5202
4203
5203
4204 4205420
520
2400 2401 2402 2403 2404 2405240
CCA
2200 2201 2202 2203 2204 2205220
CBA
0200 0201 0202 0203 0204 0205020
0000 0001 0002 0003 0004 0005000
AAAA
1000 1001 1002 1003 1004 1005100
BAAB
2000 2001 2002 2003 2004 2005200
CAAC
3000 3001 3002 3003 3004 3005300
DAAD
4000 4001 4002 4003 4004 4005400
EAAE
5000 5001 5002 5003 5004500
FAAF
4200
5200
4201
5201
4202
5202
4203
5203
4204 4205420
520
2400 2401 2402 2403 2404 2405240
CCA
2200 2201 2202 2203 2204 2205220
CBA
0200 0201 0202 0203 0204 0205020
0000 0001 0002 0003 0004 000000
AAAA
1000 1001 1002 1003 1004 100100
BAAB
2000 2001 2002 2003 2004 200200
CAAC
3000 3001 3002 3003 3004 300300
DAAD
4000 4001 4002 4003 4004 400400
EAAE
2400 2401 2402 2403 2404 240240
CCA
2200 2201 2202 2203 2204 220220
CBA
0200 0201 0202 0203 0204 020020

Device functions Proline Prosonic Flow 93
2Endress+Hauser

Device functions Proline Prosonic Flow 93 Table of Contents
Endress+Hauser 3
Table of Contents
1 Notes on using this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.1 Using the table of contents to locate a function
description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.2 Using the graphic of the function matrix to locate
a function description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
1.3 Using the index of the function matrix to locate
a function description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1 General layout of the function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.1 Blocks (A, B, C, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.2 Groups (AAA, AEA, CAA, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.3 Function groups (000, 020, 060, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.4 Functions (0000, 0001, 0002, etc.) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.1.5 Codes identifying cells . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.2 Function matrix Proline Prosonic Flow 93 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 Block MEASURED VARIABLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3.1 Group MEASURING VALUES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1.1 Function group MAIN VALUES CH1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3.1.2 Function group MAIN VALUES CH2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.1.3 Function group CALCULATED MAIN VALUES . . . . . . . . . . . . . . . . . . . . . . . . 14
3.2 Group SYSTEM UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2.2 Function group ADDITIONAL CONFIGURATION . . . . . . . . . . . . . . . . . . . . . 17
3.3 Group SPECIAL UNITS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.3.1 Function group ARBITRARY UNIT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4 Block QUICK SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.1 Quick Setup “Sensor” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 Quick Setup “Commissioning” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.3 Pulsating flow Quick Setup menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5 Block USER INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.1 Group CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.1.1 Function group BASIC CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
5.1.2 Function group UNLOCKING/LOCKING . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.1.3 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.2 Group MAIN LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
5.2.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
5.3 Group ADDITIONAL LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
5.3.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
5.4 Group INFORMATION LINE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.4.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
5.4.2 Function group MULTIPLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
6 Block TOTALIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
6.1 Group TOTALIZER (1...3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
6.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Table of Contents Device functions Proline Prosonic Flow 93
4Endress+Hauser
6.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
6.2 Group HANDLING TOTALIZER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
7 Block OUTPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
7.1 Group CURRENT OUTPUT (1...3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
7.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
7.1.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
7.2 Group PULSE/FREQUENCY OUTPUT (1...2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
7.2.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
7.2.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
7.3 Group RELAY OUTPUT (1...2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
7.3.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
7.3.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
7.3.4 Information on the response of the relay output . . . . . . . . . . . . . . . . . . . . . . . 99
7.3.5 Switching action of the relay output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
8 Block INPUTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
8.1 Group STATUS INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
8.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
8.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
8.1.3 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
9 Block BASIC FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
9.1 Group HART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
9.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
9.1.2 Function group INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
9.2 Group PROCESS PARAMETER (CH1...CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
9.2.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
9.2.2 Function group ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
9.2.3 Function group PIPE DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
9.2.4 Function group LIQUID DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
9.3 Group SYSTEM PARAMETER (CH1...CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
9.3.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
9.4 Group SENSOR DATA (CH1...CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
9.4.1 Function group SENSOR PARAMETER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
9.4.2 Function group CALIBRATION DATA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
10 Block SPECIAL FUNCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
10.1 Group ADVANCED DIAGNOSTICS (CH1,CH2,AVG) . . . . . . . . . . . . . . . . . . . . . . . 126
10.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
10.1.2 Function group ACQUISITION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
10.1.3 Function group VOLUME FLOW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
10.1.4 Function group FLOW VELOCITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
10.1.5 Function group SIGNAL STRENGTH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
10.1.6 Function group SOUND VELOCITY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136
10.1.7 Function group ACTUAL TRANSIT TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
10.1.8 Function group ACCEPTANCE RATE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
11 Block SUPERVISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
11.1 Group SYSTEM (SYSTEM CH2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
11.1.1 Function group CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 143
11.1.2 Function group OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Device functions Proline Prosonic Flow 93 Table of Contents
Endress+Hauser 5
11.2 Group VERSION INFO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
11.2.1 Function group DEVICE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
11.2.2 Function group SENSOR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
11.2.3 Function group AMPLIFIER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
11.2.4 Function group F-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149
11.2.5 Function group I/O MODULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150
11.2.6 Function groups INPUT /OUTPUT 1...4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
12 Factory settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
12.1 SI units . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
12.2 US units (for USA and Canada only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
12.3 Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
13 Index function matrix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153
14 Index key words . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

Device functions Proline Prosonic Flow 93
6Endress+Hauser
Registered trademarks
HART
Registered trademark of the HART Communication Foundation, Austin, USA
HistoROM™, S-DAT, T-DAT™, F-CHIP
Registered trademarks of Endress+Hauser Flowtec AG

Device functions Proline Prosonic Flow 93 1 Notes on using this manual
Endress+Hauser 7
1 Notes on using this manual
There are various ways of locating the description of a function of your choice in the manual:
1.1 Using the table of contents to locate a function
description
The designations of all the cells in the function matrix are listed in the table of contents. You can
use these unambiguous designations (such as USER INTERFACE, INPUTS, OUTPUTS, etc.) to
choose whichever functions are applicable to a particular set of conditions.
The page references show you exactly where to find the detailed descriptions of the functions in
question.
The table of contents is on Page 3.
1.2 Using the graphic of the function matrix to locate
a function description
This step-by-step, top-down approach starts with the blocks, the highest level, and works down
through the matrix to the description of the function you need:
1. All blocks available, and their related groups, are illustrated on Page 10. Select the block (or
the group within the block) which you need for your application and use the page reference to
locate the information corresponding to the next level.
2. The page in question contains a graphic showing of the block with all its subordinate groups,
function groups and functions.
Select the function which you need for your application and use the page reference to locate
the detailed function description.
1.3 Using the index of the function matrix to locate
a function description
Each “cell” in the function matrix (blocks, groups, function groups, functions) has a unique identi-
fier in the form of a code consisting of one or three letters or a three- or four-digit number. The code
identifying a selected “cell” appears at the top right on the local display.
Example:
A0001653-EN
The function-matrix index lists the codes for all the available “cells” in alphabetic and consecutive
order, complete with the page references for the corresponding functions.
The index to the function matrix is on Page 153.

2 Function matrix Device functions Proline Prosonic Flow 93
8Endress+Hauser
2 Function matrix
2.1 General layout of the function matrix
The function matrix consists of four levels:
Blocks -> Groups -> Function groups -> Functions
A0000961
2.1.1 Blocks (A, B, C, etc.)
The blocks are the highest-level grouping of the operation options for the device. Examples of blocks
available are MEASURED VARIABLES, QUICK SETUP, USER INTERFACE, TOTALIZERS, etc.
2.1.2 Groups (AAA, AEA, CAA, etc.)
A block consists of one or more groups. Each group represents a more detailed selection of the oper-
ation options in the higher-order block. Examples of groups available in the “USER INTERFACE”
block are CONTROL, MAIN LINE, ADDITIONAL LINE, etc.
2.1.3 Function groups (000, 020, 060, etc.)
A group consists of one or more function groups. Each function group represents a more
detailed selection of the operation options in the higher-order group. Function groups available
of group “CONTROL” are for example: BASIC CONFIGURATION, UNLOCKING/LOCKING,
OPERATION, etc.
2.1.4 Functions (0000, 0001, 0002, etc.)
Each function group consists of one or more functions. The functions are used to operate and
parameterize the device. Numerical values can be entered or parameters selected and saved.
The functions in the “BASIC CONFIGURATION” function group include LANGUAGE, DISPLAY
DAMPING, CONTRAST LCD , etc. The procedure for changing the language of the user interface,
for example, is as follows:
1. Select the block “USER INTERFACE”.
2. Select the group “CONTROL”.
3. Select the function group “BASIC CONFIGURATION”.
4. Select the function “LANGUAGE” (here you can set the language required).
…
…
…
…
…
…
…
…
0001
2001
0401
2021
2201
0002
2002
0402
2022
2202
0003
2003
0403
2023
2203
0009
2009
0409
2029
2209
0429
2049
2069
0421
2041
0422
2042
0423
2043
20632061 2062
0000
2000
0400
2020
2200
0420
2040
2060
000
200
040
202
220
042
204
206
AAA
BAA
ACA
CAA
CBA
D, E, …
A
B
C

Device functions Proline Prosonic Flow 93 2 Function matrix
Endress+Hauser 9
2.1.5 Codes identifying cells
Each cell (block, group, function group and function) in the function matrix has an individual,
unique code.
Blocks:
The code is a letter (A, B, C, etc.)
Groups:
The code consists of three letters (AAA, ABA, BAA, etc.).
The first letter matches the block code (i.e. each group in block A has a code starting with an A_ _;
the codes of the groups in block B start with a B _ _, and so on). The other two letters are for iden-
tifying the group within the respective block.
Function groups:
The code consists of three digits (000, 001, 100, etc.)
Functions:
The code consists of four digits (0000, 0001, 0201, etc.).
The first three digits are the same as the code for the function group.
The last digit in the code is a counter for the functions in the function group, incrementing from 0
to 9 (e.g. function 0005 is the sixth function in group 000).
A0001251
Block Group Function group Functions
200020012002200
CAAC

2 Function matrix Device functions Proline Prosonic Flow 93
10 Endress+Hauser
2.2 Function matrix Proline Prosonic Flow 93
BLOCKS GROUPS FUNCTION
GROUPS
MEASURED VARIABLES A→MEASURING VALUES AAA →see P. 12
(see P. 11) SYSTEM UNITS ACA →see P. 15
↓SPECIAL UNITS AEA →see P. 18
QUICK SETUP B→Sensor and commissioning setups →see P. 19
(see P. 19)
↓
USER INTERFACE C→CONTROL CAA →see P. 28
(see P. 27) MAIN LINE CCA →see P. 32
↓ADDITIONAL LINE CEA →see P. 36
INFORMATION LINE CGA →see P. 42
TOTALIZER D→TOTALIZER (1...3) DAA,B,C →see P. 49
(see P. 48) HANDLING TOTALIZER DJA →see P. 52
↓
OUTPUTS E→CURRENT OUTPUT (1...3) EAA,B,C →see P. 54
(see P. 53) PULSE/FREQUENCY OUTPUT (1...2) ECA,B →see P. 65
↓RELAY OUTPUT (1...2) EGA,B →see P. 92
INPUTS F→STATUS INPUT FAA →see P. 103
(see P. 102)
↓
BASIC FUNCTION G→HART GAA →see P. 107
(see P. 106) PROCESS PARAMETER (CH1...CH2) GIA,B →see P. 109
↓SYSTEM PARAMETER (CH1...CH2) GLA,B →see P. 119
SENSOR DATA (CH1...CH2) GNA,B →see P. 120
SPECIAL FUNCTION H→ADVANCED DIAGNOSTICS
(CH1,CH2,AVG) HEA,B,C →see P. 126
(see P. 125)
↓
SUPERVISION J→SYSTEM JAA →see P. 143
(see P. 142) SYSTEM CH2 JAB →see P. 143
VERSION INFO JCA →see P. 147

Device functions Proline Prosonic Flow 93 3 Block MEASURED VARIABLES
Endress+Hauser 11
3 Block MEASURED VARIABLES
Functions
FLOW VELOCITY
AVG.
(0087) P. 14
SIGNAL STR. CH1
(0007) P. 12
SIGNAL STR. CH2
(0067) P. 13
SOUND
VELOCITY AVG.
(0086) P. 14
UNIT
VELOCITY
(0425) P. 17
FLOW VELOCITY
CH1
(0003) P. 12
FLOW VELOCITY
CH2
(0063) P. 13
VOLUME FLOW
DIFF
(0085) P. 14
UNIT LENGTH
(0424) P. 17
SOUND
VELOCITY CH1
(0002) P. 12
SOUND
VELOCITY CH2
(0062) P. 13
VOLUME FLOW
SUM
(0084) P. 14
UNIT VOLUME
(0403) P. 16
UNIT
VISCOSITY
(0423) P. 17
FACTOR ARB.
VOL. UNIT
(0603) P. 18
⇒ ⇒ ⇒ ⇒ ⇒ ⇒
VOLUME FLOW
CH1
(0001) P. 12
VOLUME FLOW
CH2
(0061) P. 13
VOLUME FLOW
AVG
(0083) P. 14
UNIT VOLUME
FLOW
(0402) P. 15
UNIT
TEMPERATURE
(0422) P. 17
TEXT ARB. VOL.
UNIT.
(0602) P. 18
⇒ ⇒ ⇒ ⇒ ⇒ ⇒
Function
groups
MAIN VALUES
CH1
(000) P. 12
⇓ ⇑
MAIN VALUES
CH2
(006) P. 17
⇓ ⇑
CALCUL. MAIN
VALUES
(008) P. 14
CONFIGURATION
(040) P. 15
⇓ ⇑
ADDITIONAL
CONFIGURA-
TION (042) P. 17
ARBITRARY UNIT
(060) P. 18
⇒ ⇒ ⇒
Groups
MEASURING
VALUES
(AAA) P. 12
⇓ ⇑
SYSTEM UNITS
(ACA) P. 15
⇓ ⇑ ⇓ ⇑
SPECIAL UNITS
(AEA) P. 18
⇒
Block
MEASURED
VARIABLES
(A)

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93
12 Endress+Hauser
3.1 Group MEASURING VALUES
3.1.1 Function group MAIN VALUES CH1
MEASURED VARIABLES A⇒MEASURING VALUES AAA ⇒MAIN VALUES CH1 000
Functional description
MEASURED VARIABLES ➞MEASURING VALUES ➞MAIN VALUES CH1
The measuring values of channel 1 currently being measured are displayed in this function group.
!Note!
• The engineering units of all the measured variables shown here can be set in the “SYSTEM UNITS” group.
• If the liquid in the pipe flows backwards, a negative sign prefixes the flow reading on the display.
VOLUME FLOW CH1
(0001)
The volume flow currently measured appears on the display (channel 1).
User interface:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
SOUND VELOCITY CH1
(0002)
The sound velocity currently measured in the liquid appears on the display (channel 1).
User interface:
5-digit fixed-point number, incl. units
(e.g. 1400.0 m/s, 5249.3 ft/s)
FLOW VELOCITY CH1
(0003)
The flow velocity currently measured appears on the display (channel 1).
User interface:
5-digit floating-point number, including unit and sign
(e.g. 8.0000 m/s, 26.247 ft/s)
SIGNAL STRENGTH CH1
(0007)
The signal strength appears on the display (channel 1).
User interface:
4-digit fixed-point number
(e.g. 80.0)
!Note!
To ensure reliable measurement takes place, Prosonic Flow requires a signal strength
of > 30.

Device functions Proline Prosonic Flow 93 3 Block MEASURED VARIABLES
Endress+Hauser 13
3.1.2 Function group MAIN VALUES CH2
MEASURED VARIABLES A⇒MEASURING VALUES AAA ⇒MAIN VALUES CH2 006
Functional description
MEASURED VARIABLES ➞MEASURING VALUES ➞MAIN VALUES CH2
The measuring values of channel 2 currently being measured are displayed in this function group.
!Note!
• The engineering units of all the measured variables shown here can be set in the “SYSTEM UNITS” group.
• If the fluid in the pipe flows backwards, a negative sign prefixes the flow reading on the display.
VOLUME FLOW CH2
(0061)
The volume flow currently measured appears on the display (channel 2).
User interface:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
SOUND VELOCITY CH2
(0062)
The sound velocity currently measured in the liquid appears on the display (channel 2).
User interface:
5-digit fixed-point number, incl. units
(e.g. 1400.0 m/s, 5249.3 ft/s)
FLOW VELOCITY CH2
(0063)
The flow velocity currently measured appears on the display (channel 2).
User interface:
5-digit floating-point number, including unit and sign
(e.g. 8.0000 m/s, 26.247 ft/s)
SIGNAL STRENGTH CH2
(0067)
The signal strength appears on the display (channel 2).
User interface:
4-digit fixed-point number
(e.g. 80.0)
!Note!
To ensure reliable measurement takes place, Prosonic Flow requires a signal strength
of > 30.

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93
14 Endress+Hauser
3.1.3 Function group CALCULATED MAIN VALUES
MEASURED VARIABLES A⇒MEASURING VALUES AAA ⇒CALCUL. MAIN VALUES 008
Functional description
MEASURED VARIABLES ➞MEASURING VALUES ➞CALCULATED MAIN VALUES
The calculated measured values appear on the display. The measured values of both channels are used when calculating
the values.
!Note!
• The units of measure of all the measured variables shown here can be set in the “SYSTEM UNITS” group.
• If the fluid in the pipe flows backwards, a negative sign prefixes the flow reading on the display.
VOLUME FLOW
AVERAGE
(0083)
The average volume flow appears on the display. Calculated from the measured values:
(VOLUME FLOW CH1 + VOLUME FLOW CH2)/2
User interface:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
VOLUME FLOW SUM.
(0084)
The total volume flow appears on the display. Calculated from the measured values:
VOLUME FLOW CH1 + VOLUME FLOW CH2
User interface:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
VOLUME FLOW
DIFFERENCE
(0085)
The difference between the volume flows appears on the display. Calculated from the
measured values: VOLUME FLOW CH1 - VOLUME FLOW CH2
User interface:
5-digit floating-point number, including unit and sign
(e.g. 5.5445 dm3/min; 1.4359 m3/h; –731.63 gal/d; etc.)
SOUND VELOCITY
AVERAGE
(0086)
The average sound velocity appears on the display. Calculated from the measured values:
(SOUND VELOCITY CH1 + SOUND VELOCITY CH2 )/2
User interface:
5-digit fixed-point number, incl. units
(e.g. 1400.0 m/s, 5249.3 ft/s)
FLOW VELOCITY
AVERAGE
(0087)
The average flow velocity appears on the display. Calculated from the measured values:
(FLOW VELOCITY CH1 + FLOW VELOCITY CH2 )/2
User interface:
5-digit floating-point number, including unit and sign
(e.g. 8.0000 m/s, 26.247 ft/s)

Device functions Proline Prosonic Flow 93 3 Block MEASURED VARIABLES
Endress+Hauser 15
3.2 Group SYSTEM UNITS
3.2.1 Function group CONFIGURATION
MEASURED VARIABLES A⇒MEASURING VALUES AAA
⇓
SYSTEM UNITS ACA ⇒CONFIGURATION 040
Functional description
MEASURED VARIABLES ➞SYSTEM UNITS ➞CONFIGURATION
You can select the units for measured variables in this function group.
UNIT VOLUME FLOW
(0402)
Use this function to select the unit for displaying the volume flow.
The unit you select here is also valid for:
• Current output
• Frequency output
• Relay switch points (limit value, flow direction)
• Creepage
Options:
Metric:
Cubic centimeter → cm3/s; cm3/min; cm3/h; cm3/day
Cubic decimeter →dm3/s; dm3/min; dm3/h; dm3/day
Cubic meter →m3/s; m3/min; m3/h; m3/day
Milliliter →ml/s; ml/min; ml/h; ml/day
Liter → l/s; l/min; l/h; l/day
Hectoliter →hl/s; hl/min; hl/h; hl/day
Megaliter → Ml/s; Ml/min; Ml/h; Ml/day
US:
Cubic centimeter →cc/s; cc/min; cc/h; cc/day
Acre foot →af/s; af/min; af/h; af/day
Cubic foot →ft3/s; ft3/min; ft3/h; ft3/day
Fluid ounce →oz f/s; oz f/min; oz f/h; oz f/day
Gallon →gal/s; gal/min; gal/h; gal/day
Million gallon →Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (normal fluids: 31.5 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Barrel (beer: 31.0 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 42.0 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Barrel (filling tanks: 55.0 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Imperial
Gallon →gal/s; gal/min; gal/h; gal/day
Mega gallon →Mgal/s; Mgal/min; Mgal/h; Mgal/day
Barrel (beer: 36.0 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Barrel (petrochemicals: 34.97 gal/bbl) →bbl/s; bbl/min; bbl/h; bbl/day
Arbitrary unit, (see function group ARBITRARY UNIT on Page 18)
_ _ _ _ →_ _ _ _/s; _ _ _ _/min; _ _ _ _/h; _ _ _ _/day
Factory setting:
l/s
!Note!
If you defined a unit of volume in the ARBITRARY UNIT (060) function group
(see Page 18) the unit in question is shown here.

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93
16 Endress+Hauser
UNIT VOLUME
(0403)
Use this function to select the unit for displaying the volume.
The unit you select here is also valid for:
• Pulse weighting (e.g. m3/p)
Options:
Metric →cm3; dm3; m3; ml; l; hl; Ml MEGA
US →cc; af; ft 3; oz f; gal; Mgal; bbl (normal fluids); bbl (beer); bbl (petrochemicals);
bbl (filling tanks)
Imperial →gal; Mgal; bbl (BEER); bbl (PETROCHEMICALS)
Arbitrary unit →_ _ _ _
(see function group ARBITRARY UNIT on Page 18)
Factory setting:
liter
!Note!
• If you defined a unit of volume in the ARBITRARY UNIT (060) function group
(see Page 18) the unit in question is shown here.
• The unit of the totalizers is independent of your choice here. The unit for each
totalizer is selected separately for the totalizer in question.
Functional description
MEASURED VARIABLES ➞SYSTEM UNITS ➞CONFIGURATION

Device functions Proline Prosonic Flow 93 3 Block MEASURED VARIABLES
Endress+Hauser 17
3.2.2 Function group ADDITIONAL CONFIGURATION
MEASURED VARIABLES A⇒MEASURING VALUES AAA
⇓
SYSTEM UNITS ACA ⇒CONFIGURATION 040
⇓
ADDIT. CONFIG. 042
Functional description
MEASURED VARIABLES ➞SYSTEM UNITS ➞ADDITIONAL CONFIGURATION
UNIT TEMPERATURE
(0422)
Use this function to select the unit for displaying the liquid temperature.
!Note!
The liquid temperature is entered in the function TEMPERATURE (see P. 116).
Options:
°C (Celsius)
K (Kelvin)
°F (Fahrenheit)
R (Rankine)
Factory setting:
°C
UNIT
VISCOSITY
(0423)
Use this function to select the unit for liquid viscosity.
Options:
mm2/s
cSt
St
Factory setting:
mm2/s
UNIT LENGTH
(0424)
Use this function to select the unit for the measure of length.
The unit you select here is valid for:
• Nominal diameter
•Diameter
• Wall thickness
• Liner thickness
• Path length
• Wire length
• Sensor spacing
Options:
MILLIMETER
INCH
Factory setting:
MILLIMETER
UNIT VELOCITY
(0425)
Use this function to select the unit for displaying the velocity.
The unit you select here is valid for:
•Soundvelocity
• Flow velocity
Options:
m/s
ft/s
Factory setting:
m/s

3 Block MEASURED VARIABLES Device functions Proline Prosonic Flow 93
18 Endress+Hauser
3.3 Group SPECIAL UNITS
3.3.1 Function group ARBITRARY UNIT
MEASURED VARIABLES A⇒MEASURING VALUES AAA
⇓
SYSTEM UNITS ACA
⇓
SPECIAL UNITS AEA ⇒ARBITRARY UNIT 060
Functional description
MEASURED VARIABLES ➞SPECIAL UNITS ➞ARBITRARY UNIT
Use this function group to define an arbitrary unit for the flow rate variable.
TEXT ARBITRARY
VOLUME
(0602)
Use this function to enter a text for the selectable volume (flow) unit. You define only the
text, the unit of time is provided from a choice of options (s, min, h, day).
User input:
xxxxxxx (max. 4 characters)
Valid characters are A–Z, 0–9, +, –, decimal point, white space or underscore
Factory setting:
_ _ _ _ (No text)
Example:
If your text entry is “GLAS”, this text string appears on the display complete with the unit
of time, e.g. “GLAS/min”:
GLAS = Volume (text input)
GLAS / min = Volume flow as shown (on the display)
FACTOR ARBITRARY
VOLUME
(0603)
Use this function to define a quantity factor (without time) for the free selectable unit.
The volume unit on which this factor is based is one liter.
User input:
7-digit floating-point number
Factory setting:
1
Reference quantity:
Liter
Example:
The volume of a glass is 0.5 l → 2 glasses = 1 liter
User input: 2

Device functions Proline Prosonic Flow 93 4 Block QUICK SETUP
Endress+Hauser 19
4 Block QUICK SETUP
Block Group Function
groups Functions
QUICK SETUP
(B) ⇒⇒
SETUP SENSOR
(1001) P. 19 ⇒
QS COMMIS-
SION.
(1002) P. 19
QS PULSATING
FLOW
(1003) P. 19
T-DAT
SAVE/LOAD
(1009) P. 20
Functional description
QUICK SETUP
QUICK SETUP SENSOR
(1001)
Use this function to start the Quick Setup menu for assembling the ultrasonic sensors.
Options:
YES
NO
Factory setting:
NO
!Note!
You will find a flowchart of the Quick Setup SENSOR menu on Page 21. Please refer to
the Operating Instructions Proline Prosonic Flow 93 (BA 070D/06/en/....) for more
information on Quick Setup menus.
QUICK SETUP
COMMISSIONING
(1002)
Use this function to start the Quick Setup menu for commissioning.
Options:
YES
NO
Factory setting:
NO
!Note!
You will find a flowchart of the COMMISSIONING Quick Setup menu on Page 23.
Please refer to the Operating Instructions Proline Prosonic Flow 93
(BA 070D/06/en/....) for more information on Quick Setup menus.
QUICK SETUP
PULSATING FLOW
(1003)
Use this function to start the application-specific Quick Setup menu for pulsating flow.
Options:
YES
NO
Factory setting:
NO
!Note!
You will find a flowchart of the PULSATING FLOW Quick Setup menu on Page 25.
Please refer to the Operating Instructions Proline Prosonic Flow 93
(BA 070D/06/en/....) for more information on Quick Setup menus.

4 Block QUICK SETUP Device functions Proline Prosonic Flow 93
20 Endress+Hauser
T-DAT SAVE/LOAD
(1009)
Use this function to save the parameter settings / configuration of the transmitter in a
transmitter DAT (T-DAT), or to load the parameter settings from the T-DAT into the
EEPROM (manual security function).
Application examples:
• After commissioning, the current measuring point parameters can be saved to the
T-DAT as a backup.
• If the transmitter is replaced for some reason, the data from the T-DAT can be loaded
into the new transmitter (EEPROM).
Options:
CANCEL
SAVE (from EEPROM to T-DAT)
LOAD (from the T-DAT into EEPROM)
Factory setting:
CANCEL
!Note!
• If the power supply fails, the totalizer readings are automatically saved to the
EEPROM.
• The option “LOAD” couldn‘t be executed, if the T-DAT is empty or faultily.
• The option “LOAD” and “SAVE” couldn‘t be executed, if no T-DAT be present.
Functional description
QUICK SETUP