Endress+Hauser QWX43 Operator's manual

Safety symbols
See Operating Instructions.
Safety instructions
LWARNING
Incorrect commissioning leads to distorted measurement results or risk of injury due to incorrect installation!
‣The device may only be commissioned by authorized and qualified personnel.
‣If you do not understand the graphical instructions enclosed, then download the Operating Instructions.
LWARNING
Risk of burns from hot surfaces!
‣Process-specific temperatures of up to 80 °C (176 °F) can occur at the process connection when the device is in operation. Use
suitable gloves or allow the device to cool down.
LWARNING
Risk of electric shock if voltage is present!
‣If the device is connected to voltage, do not open the device cover and do not touch electrical contacts.
A secure WLAN network is recommended on the customer's side for connection to the Internet.
Network configuration
Netilion
Netilion Endpoint (Cloud )Address :
Port: TCP Port 443, SNTP Port 123
https://assets.api.netilion.endress.com/v1
Protocol ,
F :
:
: TCP, HTTPS SNTP
Wi i Client Mode DHCP (default)
Mac Address http://10.10.0.1/ System Information
Protocol: mTLS
Encryption: WPA2
Certificate: Amazon CA (certificate authority)
A0054568
Products Solutions Services
Special Documentation
Fermentation Monitor QWX43
Start-Up Guide
SD02875F/00/EN/04.23-00
71638514
2023-12-01
*71638514*
71638514

SD02875F
2 Endress+Hauser
Netilion connection
BA02162F
Netilion Value
www.netilion.endress.com/app/value
https://www.endress.com
Asset
Ser.No. +
QR-Code
Email*
Password*
Need an account? Sign up
Sign in
Dashboard
Value
All Objects +
Value
Asset
Asset scan
A0046394

SD02875F
Endress+Hauser 3
M12 24V
-
+
WLAN
Scan
QWX43
...
...
Wireless
networks
Customer
PW:
EH_QWX43
Scan
Customer
network
PW
http://10.10.0.1/
BA02162F
All Objects +
Value
Recipe
All Objects +
Value
Batch
Actual Value
1 2 3 4
https://www.endress.com
Confirm +
Exit
A0046395

SD02875F
4 Endress+Hauser
Connection for direct integration
M12 24V
-
+
WLAN
Scan
QWX43
...
...
Wireless
networks
PW:
EH_QWX43
http://10.10.0.1/
Operation
Mode
BA02162F
https://www.endress.com
Join WiFi
Network
Confirm +
Exit
IP*
QWX43 IP
Static
Configure
WiFi
PW WiFi Access
Point
PLC
QWX43
QWX43 Data
PLC
WiFi Access
Point
Download software
QWX43 https://www.endress.com/downloads
A0054556

SD02875F
Endress+Hauser 5
BA02162F
https://www.endress.com
PLC
QWX43
QWX43 Data
PLC
WiFi Access
Point
%DB1
*fbQWX43_DB*
%FB1
*fbQWX43*
EN
firstScan
release
interfaceID
connectionID
IP_1
IP_2
IP_3
IP_4
samplingRate
maxPressure
ENO
error
State
sensorData
false
0
%M1.0
64
true
*Local~PROFINET-
Schnittstelle_1*
22
192
168
0
193
1
1.0
*FirstScan*
*Daten*.Sensor1
Configuration example Siemens S7
QWX43
Important Input Parameters
IP QWX43
Max. valve pressure abs.
•
•
A0054557

SD02875F
6 Endress+Hauser
Radio approvals
Europe
This device meets the requirements of the Radio Equipment Directive RED 2014/53/EU. The standards applied in this regard are
listed in the Declaration of Conformity.
Canada and USA
FCC ID: LCGQWX4X
IC: 2519-QWX4X
English
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
• this device may not cause harmful interference, and
• this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications made to this equipment not expressly approved by Endress+Hauser SE+Co. KG may void the FCC
authorization to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• reorient or relocate the receiving antenna
• increase the separation between the equipment and receiver
• connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• consult the dealer or an experienced radio/TV technician for help Radiofrequency radiation exposure information.
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance of 20 cm (7.87 in) between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Français
Le présent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
• L'appareil ne doit pas produire de brouillage, et
• L'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en
compromettre le fonctionnement.
Les changements ou modifications apportées à cet appareil non expressément approuvée par Endress+Hauser SE+Co. KG
peut annuler l'autorisation FCC d'utiliser cet appareil.
Déclaration d'exposition aux radiations
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet
équipement doit être installé et utilisé avec un minimum de 20 cm (7.87 in) de distance entre la source de rayonnement et votre
corps.
Ce transmetteur ne doit pas être placé au même endroit ou utilisé simultanément avec un autre transmetteur ou antenne.
Brasil
Resolução 680 – ATO 14448
Este equipamento não tem direito à proteção contra interferência prejudicial e não pode causar interferência em sistemas
devidamente autorizados. Para maiores informações, consulte o site da ANATEL – www.gov.br/anatel.
CISPR22
Este produto não é apropriado para uso em ambientes domésticos, pois poderá causar interferências eletro-magnéticas que
obrigam o usuário a tomar medidas necessárias para minimizar estas interferências.

SD02875F
Endress+Hauser 7
A0039064
México
IFETEL
La operación de este equipo está sujeta a las siguientes dos condiciones:
• (1) Es posible que este equipo o dispositivo no cause interferencia perjudicial y
• (2) Este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
Perú
NOTICE: Changes or modifications made to this equipment not expressly approved by Endress+Hauser SE+Co. KG may void the
FCC authorization to operate this equipment.
Japan
Japanese Radio Law and Japanese Telecommunications Business Law Compliance.
This device is granted pursuant to the Japanese Radio Law (電波法) and the Japanese Telecommunications Business Law
(電気通信事業法).
This device should not be modified (otherwise the granted designation number will become invalid).
Tailand
เครื่องโทรคมนาคมและอุปกรณนี้ มีความสอดคลองตามขอกำหนดของ กสทช.
(This telecommunication equipment is in compliance with NBTC requirements.)
A0046301
(This radiocommunication equipment is exempted to possess license, user license, or radiocommunication station license as per
NBTC notification regarding radiocommunication equipment and radiocommunication station has been exempted for license
according to radio communication act B.E.2498.)