Endress+Hauser Teqwave T User manual

Basic safety instructions
• Read and understand the instructions in the Operating Instructions pertaining to
thedevice.
• Followinstructionsandcomplywithgeneralpolicies.
• Authorizedqualiedspecialists:trainedandfamiliarwithnationalregulations.
• Non-designatedusecompromisessafety.
• Themanufacturerdoesnotacceptanyliabilityfordamagesresultingfromimproperor
non-designateduse.
• Operatethedeviceonlyifitisinpropertechnicalcondition,freefromerrorsandfaults.
• Ensuretheresistanceofalluid-wettedmaterialsintheprocess.
• Staywithinthespeciedtemperaturerange.
• Hot uids can present a burn hazard. Ensure appropriate touch protection at the
handheldsensor.
• Riskofinjuryfromhotsensorwhenchangingtheuid.Considertheashpointofthe
liquidtobemeasured.
• Riskofinjuryfromresidueofpreviousliquidswhenchangingtheuid.Removeall
residueofpreviousliquids.
• Onlyreleasethepush-pullconnectionbypullingtheconnectoroutofthesocket.
• Potentialspreadofmalicioussoware:alwaysuseanti-virussowarewhenconnecting
toacomputer.
Operation
Operating options
• Congurationviathe„TeqwaveMobileViewer“operatingtool
• Operationviaportabletransmitter
Operating keys
IOn/O Back/Repeat
Conrm RFID EnableRFID(notavailable)
Teqwave T Quick Guide
SD02145D/06/EN/01.17
71386262
Technical data
USB port
Connection USBsocket,TypeB
Supply voltage DC5V
Battery
Battery type Lithiumionbattery
Capacity 2300mAh
Charging time Approx.2.5h
Battery life Approx.8h,atleast40measuredvaluerecordings
Degree of protection
Sensor IP68(withsensorconnected)
Sensor IP65

Performing the measurement
1.
I
RFID
Inserttheconnectorsoftheconnecting
cable into the sockets at the position
indicateduntiltheyengagewithaclick.
2. IPresstheOn/Obuttontoswitchonthe
measuringdevice.
3. Select the measuring point by tapping
thetouchscreen.
Themeasuringdevicedisplaysthemea-
suringconditions.
4. Immersethesensingareaofthesensor
completelyintotheliquidtobemeasured.
Themeasuringdevicechecksthemeasu-
ringconditions.

Themeasuringdevicedisplaysthemea-
surementresult.
5. Press the Conrm button to save the
measuredvalue.
Themeasuringdevicedisplaysthesaved
measuredvaluealongwiththelastfour
measuredvalues.
 If a dosage recommendation is
congured, the measuring device
displays a dosage recommendation.
For detailed information, see the
OperatingInstructionsforthedevice.
6. PresstheBack/Repeatbuttontoreturn
tothestartscreen.