EnGenius EAP1200H User manual

User Manual
Business Solutions
Dual Band AC1200 Indoor Access Point
Ceiling Mount Design
EAP1200H
version 1.0

2
IMPORTANT
To install this Access Point please refer to the
Quick Installation Guide included in the product packaging.

3
Chapter 1 Product Overview................................................... 4
Key Features/Introduction........................................................... 5
SystemRequirements/PackageContents..............................6
Applications...................................................................................... 7
 TechnicalSpecications...............................................................8
Physical Interface........................................................................... 9
Chapter 2 Before You Begin .................................................. 10
Considerations for Wireless Installation............................. 11
Computer Settings..................................................................... 12
Hardware Installation................................................................. 15
MountingtheEAP1200H.............................................................16
Chapter 3 Conguring Your Access Point.......................... 18
Default Settings............................................................................ 19
Chapter 4 Building a Wireless Network............................. 20
Access Point Mode....................................................................... 21
WDS AP Mode............................................................................... 22
WDS Bridge Mode........................................................................ 23
Chapter 5 Overview............................................................... 24
Overview........................................................................................... 25
Connections.................................................................................... 26
Chapter 6 Network ................................................................. 27
 OperationMode/Basic...................................................................28
IP Settings/SpanningTree Settings...................................... 29
Chapter 7 Wireless ............................................................... 31
Wireless Network........................................................................ 31
Wireless Security......................................................................... 34
Guest Network Settings......................................................... 39
Fast Roaming............................................................................... 40
Fast Handover............................................................................. 40
Wireless MAC Filtering............................................................ 41
Wireless Advanced...................................................................... 42
WPS (Wi-Fi Protected Setup)................................................. 43
WDS Link Settings....................................................................... 44
Chapter 8 Management........................................................ 45
Administration.............................................................................. 46
Management VLAN Settings................................................. 47
 Wireless Trafc Shaping......................................................... 48
SNMP Settings............................................................................... 49
Backup/Restore.......................................................................... 51
Auto Reboot Settings................................................................ 52
FirmwareUpgrade/TimeSettings............................................53
System Log/Tools.......................................................................... 55
Ping Test Parameters/Traceroute Parameters.................. 56
SpeedTestParameters/LEDControl.........................................57
 Device Display/Reset...................................................................58
Appendix ................................................................................. 59
FCC Interference Statement.................................................. 60
CE Interference Statement...................................................... 61
Table of Contents

4
Chapter 1
Product Overview

5
Maximum data rates are based on IEEE 802.11 standards. Actual throughput and range may vary depending on many factors including environmental conditions, distance between
devices, radio interference in the operating environment, and mix of devices in the network. Features and specications subject to change without notice. Trademarks and registered
trademarks are the property of their respective owners. For United States of America: Copyright © 2015 EnGenius Technologies, Inc. All rights reserved.
Key Features
• Upto26dBmtransmitpower,enablinglongrangeconnectivity
• SupportsIEEE802.11ac/a/b/g/nwirelessstandardswithupto
300Mbps(2.4GHz)and867Mbps(5GHz)
• Fourinternal5dBiOmni-DirectionalMIMOantennas
• CanbemonitoredafterdeploymentwithEnGeniusEZ 
Controller™software for Windows
(Free online download)
• CanbeusedwithincludedpoweradapterorviaPoEwithPoE
 802.3at-capableSwitchesorInjectors
• DualBand/TwoStream
• BandSteeringshiftsdualbandclientsto5GHzforbetter
throughput performance
• SecuredGuestNetwork
Introduction
TheEAP1200Hisahigh-powered,long-range,Dual-band
concurrent Wireless 802.11ac/a/b/g/n Access Point with
three major functional modes. It is designed to operate
in numerous environments; from large homes, small and
medium-sized businesses, multiple-oor ofces, hotels,
and other venues, to larger enterprise deployments. Its
high-powered, long-range characteristics make it a cost-
Introduction
effective alternative to ordinary Access Points that don’t
have the range and reach to connect to a growing number
of wireless users who wish to connect to a large home or
business network.

6
The EAP1200H supports the 2.4 GHz frequency band under
the802.11b/g/nmodewhileatthesametimeprovidinga
5GHzbandforcommunicatingortransferringlesinaless
congested network frequency band.
The EAP1200H also delivers faster wireless speeds
comparedtomodern802.11a/b/g/nwirelessdevices.Even
though the EAP1200H has been designed and engineered
for heavy trafc and demanding business environments,
inlargerhousingenvironmentsasitcanefcientlyextend
thewirelessrangeofanexistinghomerouter.Thismakes
itespeciallyidealinarchitecturally-challengingstructures,
providing whole home connectivity.
To protect sensitive data during wireless transmissions,
the EAP1200H offers different encryption settings for
wireless transmissions, including industry standard WPA
and WPA2 encryption. The EAP1200H also includes MAC
addresslteringtoallownetworkadministratorstooffer
network access only to known computers and other devices
based on their MAC addresses.
System Requirements
The following are the Minimum System Requirements in
ordercongurethedevice:
 • ComputerwithanEthernetinterfaceorwirelessnetwork 
capability
 • WindowsOS(XP,Vista,7,8),MacOS,orLinux-basedoperating
systems
 • Web-BrowsingApplication(i.e.:InternetExplorer,Firefox, 
  Chrome,Safari,oranothersimilarbrowserapplication)
Package Contents
The EAP1200H package contains the following items (all
itemsmustbeinpackagetoissuearefund):
 • EAP1200HAccessPoint
 • PowerAdapter
 • RJ-45EthernetCable
 • QuickInstallationGuide
 • CeilingandWallMountScrewkit

7
Applications
Wireless LAN (WLAN) products are easy to install and
highlyefcient. The followinglist describes someof the
many applications made possible through the power and
exibilityofWLANs:
• Difcult-to-Wire Environments: There are many situations where
wirescannotbeinstalled,deployedeasily,orcannotbehiddenfrom
view. Older buildings, sites with multiple buildings, and/or areas
that make the installation of a Ethernet-based LAN impossible,
impracticalorexpensivearesiteswhereWLANcanbeanetwork
solution.
• Temporary Workgroups: Create temporary workgroups/networks
inmoreopenareaswithinabuilding;auditoriums,amphitheaters
classrooms, ballrooms, arenas, exhibition centers, or temporary
ofceswhereonewantseitherapermanentortemporaryWireless
LAN established.
• The Ability to Access Real-Time Information: Doctors/Nurses,
Point-of-Sale Employees, and/or Warehouse Workers can access
real-time information while dealing with patients, serving
customers,and/orprocessinginformation.
• Frequently Changing Environments: Set up networks in
environments that change frequently (i.e.: Show Rooms,
Exhibits,etc.).
• Small Ofce and Home Ofce (SOHO) Networks: SOHO users
require a cost-effective, easy, and quick installation of a small
network.
• Wireless Extensions to Existing Ethernet-based Networks:
Devices like the EAP1200H enable network administrators,
installers, and end-users to extend the range and reach of an
existingEthernet-basednetwork.
• Training/Educational Facilities: Training sites at corporations or
students at universities use wireless connectivity to exchange
information between peers and easily access information for
learning purposes.

8
Security
WEP(64/128bit)
WPA/WPA2 (TKIP/AES)
Hidden ESSID
MACaddressltering,upto50elds
L2 Isolation
802.1XAuthenticator(MD5/TLS/TTLS/PEAP)
Guest Network
QoS (Quality of Service)
WMM (Wireless Multimedia)
Physical/Environment Conditions
Operating:
 Temperature:32°Fto104°F(0°Cto40°C)
 Humidity(Non-condensing):90%orless
Storage:
 Temperature:-4°Fto140°F(-20°Cto60°C)
 Humidity(Non-condensing):90%orless
Standard:
IEEE802.11b/g/non2.4GHz
IEEE802.11ac/aon5GHz
IEEE802.3at
Antenna
Four Internal 5 dBi Omni-Directional Antennas
Physical Interface
1x10/100/1000GigabitEthernetPort
1xResetButton
1xPowerConnector
LED Indicator
Power
WPS
WLAN (Wireless Connection)
LAN
Power Requirements
ExternalPowerAdapter
DCIN,12V/2A
Operation Modes
Access Point
WDS AP
WDS Bridge
Technical Specications

9
Physical Interface
Dimensions and Weights
Diameter:6.36”
Height:2.17”
1 Reset Button: Press and hold for over 10 seconds to reset to
factory default settings.
2 LED Indicators: LED lights for WPS, WLAN 5G, WLAN 2.4G,
Ethernetport,andPower
3 LAN Port (802.3at PoE): EthernetportforRJ-45cable.
4 Power Connector: 12V DC IN for Power.
5 Ceiling (Wall) Mount Hole: Using the provided hardware, the
EAP1200H can be attached to a ceiling or wall.
6 Kensington Security Slot: ToprotectyourEAP1200H,usethe
Kensington Security Slot to attach a cable lock.
3 4
1
2
5
6

10
Chapter 2
Before You Begin

11
Thissection will guide youthroughthe installation process.
Placement of the EnGenius EAP1200H is essential to
maximizetheAccessPoint’sperformance.Avoidplacing
the EAP1200H in an enclosed space such as a closet,
cabinet,orstairwell.
Considerations for Wireless Installation
The operating distance of all wireless devices can often
not be pre-determined due to a number of unknown
obstacles in the environment in which the device is
deployed. Obstacles such as the number, thickness,
andlocationofwalls,ceilings,orotherobjectsthatthe
EAP1200H’s wireless signals must pass through can
weaken the signal. Here are some key guidelines for
allowing the EAP1200H to have an optimal wireless
range during setup.
• Keepthenumberofwallsand/orceilingsbetweentheEAP1200H
and other network devices to a minimum. Each wall and/or ceiling
canreducethesignalstrength,resultinginaloweroverallsignal
strength.
• Buildingmaterialsmakea difference. Asolid metaldoor and/or
aluminum stubs may have a signicant negative effect on the
signal strength of the EAP1200H. Locate your wireless devices
carefully so the signal can pass through drywall and/or open
doorways.Materialssuchasglass,steel,metal,concrete,water
(example:shtanks),mirrors,lecabinets,and/orbrickcanalso
diminish wireless signal strength.
• Interferencefromyourotherelectricaldevicesand/orappliances
that generate RF noise can also diminish the EAP1200H’s signal
strength. The most common types of devices are microwaves or
cordless phones.
Before You Begin

12
Windows XP/Windows 7/Windows 8
InordertousetheEAP1200H,youmustrstcongurethe
TCP/IPv4 connection of your Windows OS computer system.
1a.InWindowsXPandWindows7,clickthe Start button
and open the Control Panel.
1b.InWindows8,moveyourmousetothelowerrighthot
corner to display the Charms Bar and select the Control
Panel.
2a.In Windows XP, click on Network Connections.
2b.In Windows 7 and Window 8, click View Network
Status and Tasks in the Network and Internetsection,
then select Change Adapter Settings.
Computer Settings
Windows XP Windows 7
Windows 8

13
3. Rightclick on Local AreaConnection and selectProperties.
4. Select Internet Protocol Version 4 (TCP/IPv4) and then
select Properties.
5. Select Use the following IP address and enter an IP
address that is different from the EAP1200H and Subnet
mask,thenclickOK.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
Forexample:EAP1200HIPaddress:192.168.1.1
 PCIPaddress:192.168.1.2–192.168.1.255
 PCSubnetmask:255.255.255.0

14
Apple Mac OS X
1. Go to System Preferences (it can be opened in the
Applications folder or by electing it in the Apple Menu).
2. Select Network in the Internet & Network section.
3. Highlight Ethernet.
4. In Congure IPv4,selectManually.
5. Enter an IP address that is different from the EAP1200H
andSubnetmask,thenclickOK.
Note: Ensure that the IP address and Subnet mask are
on the same subnet as the device.
Forexample:EAP1200HIPaddress:192.168.1.1
 PCIPaddress:192.168.1.2–192.168.1.255
 PCSubnetmask:255.255.255.0
6. Click Applywhennished.

15
1. Ensure that the computer in use has an Ethernet
Controller port (RJ-45 Ethernet Port). For more
information,verifywithyourcomputer’susermanual.
2. Connect one end of the Category 5e Ethernet cable into
theRJ-45portoftheEAP1200Handtheotherendto
theRJ-45 portofthecomputer.Ensurethatthecable
is securely connected to both the EAP1200H and the
computer.
3. Connect the Power Adapter DC connector to the DC-IN
port of the EAP1200H and the Power Adapter to an
available electrical outlet. Once both connections are
secure,verifythefollowing:
a) Ensure that the POWER light is on (it will be orange).
b) Ensure that the 2.4 GHz/5 GHz WLAN light is on (it will
be bluefor2.4G,andgreen for 5G).
c) Ensure that the LAN (Computer/ EAP1200H
Connection) light is on (it will be blue).
  d)Once all three lights are on, proceed to set up the
Access Point using the computer.
Thisdiagramdepictsthehardwareconguration.
Hardware Installation

16
Using the provided hardware, the EAP1200H can be
attached to a ceiling or wall.
To attach the EAP1200H to a ceiling or wall
using the mounting bracket:
1. Attach the mounting bracket to the wall or ceiling using
the provided wall/ceiling mounting hardware kit.
2. Insert the provided short screws into the bottom cover
of the EAP1200H.
Leaveenough ofthescrewsexposed toensurethatthe
unit can be attached to the mounting bracket.
Ifextraspaceisrequired,usetheprovidedspacersandlong
screws from the T-Rail mounting hardware kit to increase
the space between the unit and the mounting bracket.
3. Mount the EAP1200H on the mounting bracket by
rotating the unit clockwise about 90 degrees to secure it
in place.
Mounting the EAP1200H
Wall
Mounting Screw
Lock the EAP1200H by revolving
Mounting Bracket
P2.6*12 Screw
P3.5*32 Screw

17
Attaching the EAP1200H to a ceiling using the
provided T-Rail connectors:
1. Attach the T-Rail connectors to the bottom cover of the
EAP1200H using the provided short screws.
Note: Two sizes of T-Rail connectors are included in the
mounting hardware kit: 15/16in (2.38cm) and 9/16in
(1.43cm).Ifextraspaceisrequiredtoaccommodatedrop
ceilingtiles,usetheprovidedspacersandlongscrews.
2. Line up the connected T-Rail connectors with an
appropriately sized rail and press the unit onto the rail
until it snaps into place.
Note: ToprotectyourEAP1200H,usetheKensington
Security Slot to attach a cable lock (cable lock is not
included).
P2.6*10 Screw
Clip
T-Rail
Clip Clips
Spacer
P2.6*25 Screw

18
Chapter 3
Conguring Your Access Point

19
This section will show you how to congure the device
usingtheweb-basedcongurationinterface.
Default Settings
Please use your Ethernet port or wireless network adapter to
connect the Access Point.
IP Address 192.168.1.1
Username/Password admin/admin
Web Conguration
1. Openawebbrowser(InternetExplorer/Firefox/Safari)
and enter the IP Address http://192.168.1.1.
Note: If you have changed the default LAN IP Address of
theAccessPoint,ensureyouenterthecorrectIPAddress.
2. Thedefaultusernameandpasswordare:admin. Once
youhaveenteredthecorrectusernameandpassword,
click the Login button to open the web-based
congurationpage.
3. If successful, you will be logged in and see the
EAP1200H User Menu.
Conguring Your Access Point

20
Chapter 4
Building a Wireless Network