ENTRO D0701 User manual

Print Actual Size A3
D0606 Slide Arm - D0451 Closer
Installation Instructions
D0606/D0451 Installation Instructions www.entro.com.au
104240
39
4-#10x2”
2-#10x2”
470
CAUTION - Pull Side Installation Only
For Push Side Installation Order D0612 Long Slide Rail
143
HOLD - OPEN CLIP (OPTIONAL) SLIDER
Instructions for Installation of the Door Closers (Standard Type)
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and fix it firmly
with the screw
Mount the closer on the door
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
Track
Body
Main arm
Mounting screw CLOSING LATCHING
SLOW
No.1 CLOSING
No.2 LATCHING
FAST

Print Actual Size A3
D0606 Slide Arm - D0451 Closer
Installation Instructions
D0606/D0451 Installation Instructions www.entro.com.au
104 240
39
4-#10x2”
2-#10x2”
470
CAUTION - Pull Side Installation Only
For Push Side Installation Order D0612 Long Slide Rail
143
HOLD - OPEN CLIP (OPTIONAL)SLIDER
Instructions for Installation of the Door Closers (Standard Type)
No.1 CLOSING
No.2 LATCHING
SLOWFAST
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
CLOSING LATCHING
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and fix it firmly
with the screw
Mount the closer on the door
Track
Body
Main arm
Mounting screw

Print Actual Size A3
D0606 Slide Arm - D0601 Closer
Installation Instructions
D0606/D0601 Installation Instructions www.entro.com.au
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and
fix it firmly with the screw
Mount the closer on the door
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
Track
Body
Main arm
Mounting screw CLOSING LATCHING
SLOW
No.1 CLOSING
No.2 LATCHING
FAST
Instructions for Installation of the Door Closers (Standard Type)
CAUTION - Pull Side
Installation Only
For Push Side
Installation Order
D0612 Long Slide Rail
HOLD - OPEN CLIP (OPTIONAL) SLIDER
SPRING POWER ADJUSTMENT
Adjust closer size according to
chart on the bottom
*: Factory Pre-set
2-5 MODEL
No. Of TurnsSize
7½
0
*
2
2½
2
3
5
4
470
1143
143
240 100
2-M5
23.5

Print Actual Size A3
D0606 Slide Arm - D0601 Closer
Installation Instructions
D0606/D0601 Installation Instructions www.entro.com.au
SLOW
FAST
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
CLOSING LATCHING
No.1 CLOSING
No.2 LATCHING
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and
fix it firmly with the screw
Mount the closer on the door
Track
Body
Main arm
Mounting screw
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Instructions for Installation of the Door Closers (Standard Type)
HOLD - OPEN CLIP (OPTIONAL)
SLIDER
CAUTION - Pull Side
Installation Only
For Push Side
Installation Order
D0612 Long Slide Rail
SPRING POWER ADJUSTMENT
Adjust closer size according to
chart on the bottom
*: Factory Pre-set
2-5 MODEL
No. Of Turns Size
7½
0
*
2
2½
2
3
5
4
470
2-M5
23.5
11 43
240100
143

Print Actual Size A3
D0606 Slide Arm - D0701 Closer
Installation Instructions
D0606/D0701 Installation Instructions www.entro.com.au
104 240
39
4-#10x2”
2-#10x2”
470
CAUTION - Pull Side Installation Only
For Push Side Installation Order D0612 Long Slide Rail
143
HOLD - OPEN CLIP (OPTIONAL)SLIDER
Instructions for Installation of the Door Closers (Standard Type)
No.1 CLOSING
No.2 LATCHING
SLOWFAST
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
CLOSING LATCHING
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and fix it firmly
with the screw
Mount the closer on the door
Track
Body
Main arm
Mounting screw

Print Actual Size A3
D0606 Slide Arm - D0701 Closer
Installation Instructions
D0606/D0701 Installation Instructions www.entro.com.au
CAUTION - Pull Side Installation Only
For Push Side Installation Order D0612 Long Slide Rail HOLD - OPEN CLIP (OPTIONAL)
143
23.5
43
100255
12
470
SLIDER
Instructions for Installation of the Door Closers (Standard Type)
Determine the installation position of the door closer
place the templet on the closed door and the top
jamb, and make holes in them with a punch or other
proper tool
Templet
Fix the link shoe to the top jamb
Fit the lever to the pinion shaft and fix it firmly
with the screw
Mount the closer on the door
Adjust the link length so that the link
makes a right angle with the top jamb,
and fix with the lock nut
FIX PINION CAP TO CLOSER BODY
Adjust the closing speed.
The door closer closes the door at two different
speeds.
The first speed can be controlled by the No.1
speed adjusting valve, and the second speed, by
the No. 2 speed adjusting valve
Track
Body
Main arm
Mounting screw CLOSING LATCHING
SLOW
No.1 CLOSING
No.2 LATCHING
FAST
REGULAR INSTALLATION
FOR CLOCKWISE OPENING DOOR
(Closer mounted on door on pull side)
SPRING POWER ADJUSTMENT
Adjust closer size according to
chart on the bottom
CC: Counterclockwise
C: Clockwise
*: Factory Pre-set
2-6 Model
No. Of TurnsSize Direction
5
3
3
0*
6
2
3
5
4
6
CC
CC
C
-
C