ENTRYPASS EP.S3150 User manual

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
SUPREMADM
CONFIGURATION GUIDE
Version: 1.02
Last Updated: 28-06-2016
1

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Notes:
See http://www.entrypass.net/ for updates, revisions, and download the latest
installation manual
There are currently 2 version of EntryPass Platform1 Access Control System available for
different card number system
1) EntryPass Platform1 Access Control System (6 Digit Card Number System) cater for
6 digit card number installation
2)EntryPass Platform1 Access Control System (10 Digit Card Number System) cater for
10 digit card number installation
For EntryPass Platform1 Access Control System to work correctly, both control panel and
software MUST be using the same card number system
This software installation manual might be updated without prior notice
Please refer to separate EntryPass Platform1 User Manual for detail operation help. The
Official EntryPass Platform1 User Manual can be downloaded from our website under
“Download” section
2

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Technical Support
If you cannot find the answer to your question in this manual or in the Help files, we recommend you
contact your system installer. Your installer is familiar with your system configuration and should be able
to answer any of your questions.
Should you need additional information, please call our Technical Support Help desk, Monday to Friday
9:00 AM to 6:00 PM (GMT +8:00)
Method Details
Phone + 60 (3) - 8068 1929
Fax + 60 (3) - 8068 1922
Internet www.entrypass.net
Email [e-mail]
BEFORE YOU BEGIN
3

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Serial Control Panel Active Network
Control Panel
BioLite Net BioEntry Plus
EP.S3200
EP.S3400
EP.N5150
EP.N5200
EP.N5400
Suprema Biometrics
Devices (SBD)
EP.S3150
Entrypass HCB based control panels that works with
Suprema BioLite Net & BioEntry Plus
4

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Before any SBD devices can be integrated to
Entrypass HCB based control panels, certain
parameters must be configured. Please follow
the workflow below for detailed guidelines.
Important Notice
5

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Configure IP Address for
Suprema Biometrics
Devices (SBD)
Connect SBD to PC
which have Suprema
DM installed using a
cross-cable
Step - 01
Step - 02
Connect to SBD and
retrieve the Device ID
Load parameters to
SBD for it to work with
Entrypass
Connect SBD to
Entrypass HCB based
control panel
Step - 03
Power off SBD
Step - 04Step - 05Step - 06
Connect SBD to
Entrypass HCB based
control panel
Step - 07
Standard Entrypass –Suprema Biometrics Integration
Workflow
6

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
To configure the Suprema BioLite Net device or BioEntry Plus
device, you have to prepare the following items:
(i) Suprema DM program (Located in the EntryPass Platform1
CD)
(ii) Ethernet Connector (come with any Suprema device)
(iii) Cross cable (Cat 5e)
(iv) PC or notebook
(v) MIFARE Writer (Purchase Separately)
(vi) Suprema BioMini Enrollment Station (Purchase Separately)
(vii)Entrypass HCB based control panels:- EP.S3150, EP.S3200,
EP.S3400, EP.N5150, EP.N5200, EP.N5400
Tools Required
7

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Each SBD must be configured with a valid IP address before it
can communicate with Suprema DM
To configure an IP address for Suprema BioLite Net device,
please refer to BioLite Net User Guide, page 46 (except Server
setting select ‘No Use’).
To configure an IP address for Suprema BioEntry Plus device,
please refer to BioEntry Plus Installation, page 26.
Configure SBD IP Address
8

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
PC / Notebook with Suprema DM
Notes for BioEntry Plus user:
Dipswitch 2 must be turn “On” to
allow modification on the
parameter
Connecting SBD To PC/Notebook
Cross cable
BioLite Net
9

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Launch Suprema DM
Select TCP/IP
10

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
1. Enter SBD IP Address
2. Click ‘Connect’ button
Notes: Please refer to ‘BioEntry Plus Installation Guide’ on how’s to get the default IP address
11

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
1. Click ‘Get’ button
2. Copy down the Device ID
12

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
2. Click ‘Load ‘button
1. Select SBD model
13

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Successfully Loaded The Parameters To SBD
14

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
BioLite Net
BioEntry Plus
Notes: for BioEntry Plus user
Dipswitch 2 must be turn “OFF”
after power source is
disconnected to prevent losing
parameters after power cycle
Successfully Loaded The Parameters To SBD
Switch off all power source to
SBD
15

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
BioLite Net
BioEntry Plus
Please refer HCB
Wiring Guide
Please refer HCB
Wiring Guide
Connecting SBD To Entrypass HCB Control Panel
16

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Finger Only
Finger + Card
Card + Pin
Card Only
Entrypass Platform1 Access Control System
17

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Add control panel to
Entrypass Platform1 ACS
Select “Reader Type”
for Suprema
Step - 01 Step - 02
Enable Suprema
Device ID
Enroll Administrator’s
fingerprint template
Step - 03
Enroll Staff’s fingerprint
template
Step - 04Step - 05Step - 06
Connect Suprema
BioMiNi Enrollment
Station to EP.P1
Pre-Requisites
SBD are connected to
HCB based control
panel
USB
Entrypass Platform1 Access Control System –Suprema SBD
Integration Workflow
Suprema BioMini enrollment
station
18

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Entrypass Platform1 Access Control System –Add SBD
Device
1. Select ‘Reader’ tab
2. Select ‘Suprema’ from
‘Reader Type’ dropdown list
19

Copyright © Entrypass Corporation
ENTRYPASS TECHNICAL –CONFIGURATION GUIDE
Entrypass Platform1 Access Control System –Add SBD
Device
1. Select ‘Fingerprint’ tab
2. Tick the checkbox and then
enter the SBD Device ID you
obtained previously
3. Click ‘Save and Close’
button
20