Eonon D1002 User manual

24
1

2
23
JACK

22
3
PTY
AF
TA
(TA)
(AF)
(PTY)
Mounting Example
PRECAUTIONS
REPLACING THE FRONT PANEL
DETACHING THE FRONT PANEL
This mounting method isused for Japanese cars.
The actual mounting methodshould depend on
the types of thecars and the supplied.
Bracket
Existing parts supplied
to your car
Note:
Store small articles in places not ac-
-cessible to children.
Install only with the supplied screws.
Installation varies depending on the
types of cars and supplied parts.You
should have the unit installedby
Do not touch the contactson the ront panel or
on the unit body, since this may resultin poor
electrical contact. If dirt or dust get on the
contacts, wipe them with aclean, dry cloth.
First,insert the left side ofthe front panel
into the main unit. Push the right side of the
front panel until itlocks firmly into themain
unit, at one time,insert the right sideof the
front panel into themain unit.
Before detaching the frontpanel. Be sure to
press .Press ,thenture thefront panel
to the level,slide itto the left, and pullit off
towards you.
qualified technician.
1.
2.
3.

4
21
Parts List (The numbers in the list are keyed to those in the instructions.)
Mounting Example
Put in the mounting sleeve.
Bend these claws outward for a
tight fit, if necessary. Fix the springs on each side.
Dashboard Fire Wall
Fasten the rear bracket screws
and backside harness, and fix
the unit well. 3

20
5

6
19

18
7

8
17
PTY
AF
TA
PTY
AF
TA
PTY
AF
TA

16
9

10
15

14
11

12
13