Click : To set the interface display language to English or Chinese.
Click : To set the key tone ON or OFF.
Click : To set music or video during navigation. (GPS mixing function introduction: M1:
When there's prompt from the GPS, two speakers in front of the vehicle make GPS sound,
while another two speakers at the rear make music sound. M2: When there's prompt from
the GPS, music from 4 speakers is all Mute, and 4 speakers only make GPS sound.)
Click : The user could set day or light mode.
Click : Set rearview image on or off.
Click : Refer to wheel control guidance as below for detailed instructions.
Click : Calibrate the touch flexibility.
Click : Set brake ON or OFF.
Click : Set Button light color.
Click Button , Time Setup button, to set time and date.
9
8
7
6
5
4
3
2
1
Sound Setup
Time Setup
4
Back to Main Menu
Click Button to return to the main menu.
14
Click Button , Sound Setup button, to balance sound effect, equal loudness, treble,
bass and four speakers around the vehicle.
3
Simple Setup
2
3
1
4
5
8
9
6
7
Steering Wheel Control
If your car has wheel learning function, please
operate according to the following steps:
2. Start the machine after confirming the correct connection, enter Set Menu by pressing
the Set Button on the upper right of the screen;
3. Press Wheel Button to enter Wheel Set Menu; (High resistance of direction control
needs to set high impedance to “on”, while set “off” to low resistance.)
4. Press Test Button, the user will see some character information, displaying sample A
and B data, (wheel initial data)
5. Press Cancel Button, to clear all buttons; please remember, once enter this menu, make
sure to press Cancel Button first to clear all previous settings;
6. Then enter learning function of buttons, press Wheel Function Button, “Please press a
button” displays on the information bar, reminding the user to press a functional button to
be set; when this button is pressed, input data will display on information bar, indicating
successful data collection of the main machine, and the user could continue pressing
buttons to complete learning of all buttons on the wheel;
7. Press Complete Button to save all button functions having been learned, and start
Wheel Control function, otherwise, all previously learned buttons will be invalid;
8. When setup is completed, the user could press Cancel Button to abandon all learnt data,
and then close wheel learning function;
9. During the Wheel Button learning process, some button values are very close, and it is
very easy to cause mistakes, so please change these two cables, that is when one control
cable is selected, the user could change to another cable, so as to return to the first step to
learn;
10. Vehicle Wheel Button may be small in number, the user could customize functions on
his/her own; make sure wheel buttons correspond with functional buttons in the menu, so
as to complete learning function; if wheel buttons do no have corresponding functions, just
skip it, for it will not impact the normal operation, the user only needs to learn functions
included in the wheel;
11. After completing the learning, the user could enter Set Menu, press Cancel Button to
close wheel button learning function, if user needs to reuse this function, it is suggested to
return to the first step.
1. During power-off, select wheel control
cables, (some cars have 3 cables, some
have 2 cables) , find grounding wire of the
vehicle, then connect it to the main machine;
if there're 3 wheel cables on the vehicle,
connect the other 2 cables to wheel control
cable of the main machine; if there's only
2 cables, connect the other cable to one
wheel control cable;
5 6
